Electrostatic patterning of a silica surface: a new model for charge build-up on a dielectric solid

The polarization of interdigitated gold electrodes mounted over a silica thin film formed by oxidation of a Si wafer produces reproducible electrostatic patterns with overall excess negative charge, as observed by scanning electric potential microscopy. Domain charge concentrations as high as 76 charge units per square micrometer are obtained when a 5 V difference is applied to the electrodes thus producing fields in the 10(6) V m(-1) range. These patterns vanish when the electrodes are short-circuited and grounded. Characteristic times for pattern formation and relaxation are in the order of 10 min. The results are consistent with a model based on the discharge of H(+) ions at the negative electrodes, leaving behind immobile surface-bound SiO(-) groups and thus showing that chemisorption phenomena are decisive for electrostatic charging of insulators.     

Computational study of formamide–water complexes using the SAPT and AIM methods

In this work, the complexes formed between formamide and water were studied by means of the SAPT and AIM methods. Complexation leads to significant alterations in the geometries and electronic structure of formamide. Intermolecular interactions in the complexes are intense, especially in the cases where the solvent interacts with the carbonyl and amide groups simultaneously. In the transition states, the interaction between the water molecule and the lone pair on the amide nitrogen is also important. In all the complexes studied herein, the electrostatic interactions between formamide and water are the main attractive force, and their contribution may be five times as large as the corresponding contribution from dispersion, and twice as large as the contribution from induction. However, an increase in the resonance of planar formamide with the successive addition of water molecules may suggest that the hydrogen bonds taking place between formamide and water have some covalent character.     

Effect of acetate on ferrihydrite crystallization

Mössbauer spectroscopy was used to follow the aging of ferrihydrite with different amounts of acetate, to achieve more crystalline products. Mössbauer spectra of fresh samples did not show any magnetic components. After two years aging, the solids presented crystalline fractions. Hematite formation was inhibited as acetate content increased in solids. For an acetate/iron molar ratio equal to 0.63 goethite was formed instead of hematite. X-ray diffraction confirmed these results. This work shows that synthetic samples can be used for elucidating the anti-hematitic effect of organic matter already detected in soils.     

Interaction of Tb(III) and hydrolyzed polyacrylamides in solution as a gel and in the solid state

Formation of the HPAM-Tb³ complex in solution was observed in the intensification of Tb(III) fluorescence, viscosity, and light scattering. The interaction is dependent on the degree of hydrolysis of the copolymer and the pH of the solution. As the pH value increases, an intensification of the interaction and formation of a gel is observed. The latter was associated with the appearance of crosslinks in which terbium, or one of its hydrolysis products, works as a binding agent between chains. After drying, the characterization of the residues of the gels was effected by analytical determination (C, H, N, Cl, Tb), fluorescence, and infrared spectrophotometry. The analysis and fluorescence revealed the existence of particles of terbium hydroxide; the infrared spectrophotometry showed the binding of terbium (III) to carboxylate of the copolymer.     

A computational study of [2.2]cyclophanes

A computational study of isomeric [2.2]cyclophanes, namely [2.2]paracyclophane 1, [2.2]metacyclophane 2, and [2.2]metaparacyclophane 3, has been carried out. For 1, geometry optimizations performed by various methods at different basis sets showed that MP2/6-31+G(d,p) and B3PW91/6-31+G(d,p) provide the best results in comparison to the X-ray data. Compound 1 has D(2) symmetry with distorted bridges. A conformational search was performed for [2.2]cyclophanes 2 and 3. Each cyclophane exists in two conformations which have different energies in the case of 3 but are degenerate in the case of 2. Relative energies and strain energies at the bridges follow the same order, indicating that the relief of bridge tension and repulsion between pi clouds are determining factors for the stability of [2.2]cyclophanes. Through a decomposition of strain energy, it can be concluded that both the rings or the bridges can absorb strain, but it depends on the conformer of butane that is considered in the calculation of SE(br). Changes in aromaticity of these compounds were evaluated by NICS and HOMA and were compared with benzene and xylenes dimers as models. Despite distortions from planarity and shortening and lengthening of the C-C bonds relative to the mean, the phenyl rings are aromatic. NICS suggests a concentration of electronic density between the rings as a result of bridging process. Computed MK, NPA, and GAPT charges were compared for the isomeric cyclophanes. The GIAO chemical shifts were calculated and indicate that 1 has a larger diamagnetic anisotropy than the other isomers.     

Thermal behavior of polyacrylonitrile polymers synthesized under different conditions and comonomer compositions

Polyacrylonitrile (PAN) polymers are used as precursors for carbon fiber production. This process requires an oxidative stabilization step, which can be studied by differential scanning calorimetry (DSC). In this sense, thermal behavior of PAN based terpolymers by different polymerization processes, compositions and itaconic acid concentrations in the reaction media were investigated. The obtained results showed that the addition of itaconic acid and methyl acrylate as comonomers resulted a lower heat flow during the process comparing to the PAN homopolymer. It suggested that these comonomers aid the oxidative stabilization stage for all studied process. The redox system polymerization at 40°C resulted in a lower heat flow. Itaconic acid decreases slightly initial and peak temperatures of the terpolymer and heat flow until concentration of 3y. The cyclization temperature decreases when MAis incorporated into the terpolymer compared to the MMA terpolymer and increases when MAA is the acidic monomer. Among terpolymers the AN/MA/AA polymer showed the best thermal behavior for carbon fiber producing.     

Latex Fractionation by Sedimentation and Colloidal Crystallization: The Case of Poly(styrene-co-acrylamide)

Poly(styrene-co-acrylamide) (PS-AAM) latex was prepared, fractionated by sedimentation under gravity, and characterized by PCS, infrared spectra, secondary and backscattered electron imaging in the scanning electron microscope, and electron spectroscopy imaging in an analytical transmission electron microscope. Three latex fractions were obtained. The lower fraction was opalescent and its particles were the more uniform, concerning size, chemical composition, and topochemical features. This lower fraction was still further fractionated by zonal centrifugation in a density gradient, yielding two fractions with similar macrocrystal-forming abilities but different sizes and chemical compositions. These results confirm those previously obtained for the PS-HEMA latex. Copyright 2000 Academic Press.     

Enhanced ethanol sensing properties of WO3 modified TiO2 nanorods

Pristine and WO₃ decorated TiO₂ nanorods (NRs) were synthesised to investigate n-n-type heterojunction gas sensing properties. TiO₂ NRs were fabricated via hydrothermal method on fluorine-doped tin oxide coated glass (FTO) substrates. Then, tungsten was sputtered on the TiO₂ NRs and thermally oxidised to obtain WO₃ nanoparticles. The heterostructure was characterised by X-ray diffraction (XRD), scanning electron microscopy (SEM), and energy-dispersive X-ray (EDX) spectroscopy. Fabricated sensor devices were exposed to VOCs such as toluene, xylene, acetone and ethanol, and humidity at different operation temperatures. Experimental results demonstrated that the heterostructure has better sensor response toward ethanol at 200 °C. Enhanced sensing properties are attributed to the heterojunction formation by decorating TiO₂ NRs with WO₃.     

Characterization of hydrogen bonds in the interactions between the hydroperoxyl radical and organic acids

The hydrogen bonds formed between the hydroperoxyl radical and formic, acetic, and trifluoroacetic acids were characterized using geometric, energetic, and electronic parameters through calculations done with the UB3LYP/6-311++G (3df,3pd) and UB3LYP/EPR-III methods. The wave functions were analyzed through the natural bond orbital, natural steric analysis, natural resonance theory, and atoms in molecules methods. The energy decomposition method proposed by Xantheas was used. The vibrational frequencies and the intensity of the O-H stretching bands, as well as the spin densities, were compared with experimental evidence. The results allowed the characterization of the hydrogen bonds formed in the complexation of the acids with the hydroperoxyl radical. Complexation led to significant alterations in the equilibrium geometry of the monomers. Energetic analysis proved that the studied complexes are stable and allowed the understanding of the effect of the electron-donating and electron-withdrawing groups in their stabilization. The alterations in the electronic structure of the monomers after complexation led to an increase in the resonance of the carboxyl group, which can be partially attributed to the hydrogen bond.     

Systematic study of luminescent properties of new lanthanide complexes using crown ethers as ligand

This is a report on the synthesis, characterization and spectroscopic study of 24 lanthanide-crown ether coordination compounds, where Eu(III), Tb(III) and Gd(III) were complexes to 12-crown-4 (12C4), 15-crown-5 (15C5), 1,10-phenanthroline (phen) and 2,2′-dipyridyl (dipy). The compounds were synthesized in an ethanol/acetone solution at room temperature and analyzed using CHN elemental analysis and infrared, absorption and emission spectroscopies. The polarizability that the ligand exerts on the emission process was verified and found remarkable. The Eu-15C5-phen complex showed the highest quantum efficiency (71.6%) because of its low non-radiative rate and highest polarizability with reference to the ligands system.