Capacity Constrained Transit Assignment with Common Lines

This paper proposes the use of absorbing Markov chains to solve the capacity constrained transit network loading problem taking common lines into account. The approach handles congested transit networks, where some passengers will not be able to board because of the absence of sufficient space. The model also handles the common lines problem, where choice of route depends on frequency of arrivals. The mathematical formulation of the problem is presented together with a numerical example. This revised version was published online in July 2006 with corrections to the Cover Date.     

Effect of annealing on structure and permeability of poly [(l-trimethylsilyl)-l-propyne]

The permeability of annealed poly (l-(trimethylsilyl)-l-propyne) was studied from the viewpoint of structural information obtained from x-ray diffraction and density. The sample cast from benzene solution had low density (0.82 g/cm³) and high permeability, whereas the annealed sample had a higher density (0.88 g/cm³) and permeability lower by two orders of magnitude. The smaller-angle x-ray diffraction peak for each sample, which was likely to reflect the distance between intermolecular chains, increased in intensity and shifted toward higher angle, corresponding to the change of the density with annealing. The logarithmic oxygen permeability was proportional to the density, namely the free volume fraction correlated with the diffusion coefficient and controlled by annealing and swelling by alcohols.     

Detection of 8-hydroxy-2'-deoxyguanosine in deoxyribonucleic acid by the 32P-postlabeling method.

Using synthesized 8-hydroxy-2'-deoxyguanosine 3'-monophosphate as a marker, the 32P-postlabeling method was adapted with minimum modifications for the analysis of 8-hydroxy-2'-deoxyguanosine (8-OH-dG) content in deoxyribonucleic acid (DNA). This method allows the analysis of one 8-OH-dG per 10(4) DNA nucleotides with only 10 pmoles of nucleotides required. The amounts of 8-OH-dG in DNA detected by the postlabeling method correlated well with the electrochemical detection method but were consistently lower.     

Formation of polymeric micelles with amino surfaces from amphiphilic AB‐type diblock copolymers composed of poly(glycolic acid lysine) segments and polylactide segments

Amphiphilic AB‐type diblock copolymers composed of hydrophobic poly(L ‐lactide) (PLA) segments and hydrophilic poly(glycolic acid lysine) [poly(Glc‐Lys)] segments with amino side‐chain groups self‐associated to form PLA‐based polymeric micelles with amino surfaces in an aqueous solution. The average diameter of the loose core–shell polymeric micelles for poly(Glc‐Lys) [number‐average molecular weight (M_n) = 1240]‐b‐PLA (M_n = 7000) obtained by a dimethyl sulfoxide/water dialysis method was estimated to be about 50 nm in water by dynamic light scattering measurements. The size and shape of the obtained polymeric micelles were further observed with transmission electron microscopy and atomic force microscopy. To investigate the possibility of applying the obtained PLA‐based polymeric micelles as bioabsorbable vehicles for hydrophobic drugs, we tested the entrapment of drugs in poly(Glc‐Lys) (M_n = 1240)‐b‐PLA (M_n = 7000) micelles and their release with doxorubicin as a hydrophobic drug. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 1426–1432, 2002     

Characterization of tension and normally lignified wood cellulose inPopulus maximowiczii

We have investigated unlignified tension wood and normally lignified wood celluloses inPopulus maximowiczii with particular reference to the composition of two crystalline phases I/I (triclinic/ monoclinic). Four independent techniques, which enable us to detect the two phases, CP/MAS¹³C NMR, Fourier transform infrared microscopy, selected-area electron diffraction, and X-ray diffraction were applied. Because of the low crystallinity of wood celluloses, particularly in the case of celluloses in the lignified cell wall, no single method was decisive enough to be able to determine the composition of the two phases as one can with highly crystalline materials. The I dominant structure (monoclinic crystal type) was, however, preferred for both tension and normal wood celluloses.     

A new method for characterizing solid surface acidity - an infrared spectroscopic method using probe molecules such as N2 and rare gases

A new infrared-spectroscopic method to characterize acid sites of zeolites using small and weakly basic molecules such as diatomic and monoatomic molecules is reviewed. It has been revealed that N2 is an effective probe molecule to characterize both Brønsted acidity and Lewis acidity of H-form zeolites. The characteristics of the N 2 probe are discussed in detail in comparison with the CO probe. O2 and rare gases have also been applied to monitor the strong acid sites in the H-form zeolites. Further, the studies of the adsorption of water on H-form zeolites are shortly reviewed: a recent IR study of the H₂ ¹⁸O adsorption on H-ZSM-5 has given direct experimental evidence that the main feature of the observed IR bands is due to the hydrogen-bonded adsorption of water on the Brønsted acid sites.     

Optically active antifungal azoles. VIII. Synthesis and antifungal activity of 1-[(1R,2R)-2-(2,4-difluoro- and 2-fluorophenyl)-2-hydroxy-1-methyl-3-(1H-1,2,4-triazol-1-yl)propyl]- 3-(4-substituted phenyl)-2(1H,3H)-imidazolones and 2-imidazolidinones

New optically active antifungal azoles, 1-[(1R,2R)-2-(2,4-difluoro- and 2-fluorophenyl)-2-hydroxy-1-methyl-3-(1H-1,2,4-triazol-1-yl)propyl ]-3-(4- substituted phenyl)-2(1H,3H)-imidazolones (1,2) and 2-imidazolidinones (3,4), were prepared in a stereocontrolled manner from (1S)-1-[(2R)-2-(2,4- difluoro- and 2-fluorophenyl)-2-oxiranyl]ethanols (15, 16). Compounds 1-4 showed potent antifungal activity against Candida albicans in vitro and in vivo, as well as a broad antifungal spectrum for various fungi in vitro. Furthermore, the imidazolidinones, 3b--e and 4d, e, were found to exert extremely strong growth-inhibitory activity against Aspergillus fumigatus.     

Structure and crystallization of sub-elementary fibrils of bacterial cellulose isolated by using a fluorescent brightening agent

The structure and crystallization of carefully isolated sub-elementary fibrils (SEFs) of bacterial cellulose have been investigated using TEM, WAXD, and high-resolution solid-state ¹³C NMR. The addition of a suitable amount of fluorescent brightener (FB) to the incubation medium of Acetobacter xylinum effectively suppressed the aggregation of the SEFs into the microfibrils, as previously reported. However, this study confirmed for the first time that serious structural change in the SEFs occurs during the removal of excess FB by washing with buffer solutions having pH values higher than 6 or with the alkaline aqueous solution that was frequently used in previous studies. In contrast, the isolation of unmodified SEFs was successfully performed by utilizing a washing protocol employing pH 7 citrate–phosphate buffer solution containing 1% sodium dodecyl sulfate. High-resolution solid-state ¹³C NMR and WAXD measurements revealed that the SEFs thus isolated are in the noncrystalline state in which the pyranose rings of the almost parallel cellulose chains appear to be stacked on each other. The respective CH₂OH groups of the SEFs adopt the gt conformation instead of the tg conformation found in cellulose I _α and I _β crystals, and undergo significantly enhanced molecular motion in the absence of intermolecular hydrogen bonding associated with these groups. The main chains are also subject to rapid motional fluctuations while maintaining the parallel orientation of the respective chains, indicating that the SEFs have a liquid crystal-like structure with high molecular mobility. Moreover, the SEFs crystallize into cellulose I _β when the FB molecules that may adhere to the surface of the SEFs are removed by extraction with boiling 70 v/v% ethanol and 0.1N NaOH aqueous solution. On the basis of these results, the crystallization of the SEFs into the I _α and I _β forms is discussed, including the possible formation of the crystalline-noncrystalline periodic structure in native cellulose.     

Liquid crystalline properties of dissymmetric molecules IV. The substituent effect on thermal properties of nematic and smectic A phases in three aromatic ring systems with ester linkages

This paper describes the effect of substituent and ester linkage on smectic properties for some derivatives of 4-R -phenyl 4-(4-octyloxybenzoyloxy)benzoates (1), 4-octyloxyphenyl 4-(4-R-benzyloxy)benzoates (2), 4-(4-octyloxybenzoyloxy)phenyl 4- R -benzoates (3), and 4-R-phenyl 4-octyloxyphenyl terephthalates (4) where R = OCH₃, CH₃, OC₈H₁₇, C8H17, halogens, CF₃, OCF₃, CN, NO2, etc. The thermal properties are discussed in terms of the electrostatic nature of the substituents and the relative orientation of the ester groups with respect to both terminal substituents. The substituent effect on the layer structure of the smectic A phase is also examined by means of a small angle X-ray analysis.     

Challenge to ultra-trace analytical techniques of nuclear materials in environmental samples for safeguards at JAERI: methodologies for physical and chemical form estimation

From a viewpoint of physical and chemical form estimation, ultra-trace analytical techniques of nuclear materials in environmental samples for safeguards have been investigated at Japan Atomic Energy Research Institute. This article deals with (1) an outline of the developed techniques for bulk and particle analyses of uranium and plutonium in the safeguards environmental samples; (2) current R&D on techniques relating to estimation of the physical and chemical form, such as SEM images and EDX spectra for fine particles of nuclear materials and fission track observation applicable to fissile materials; and (3) possible analytical methodologies, as future works, applicable to ultra-trace amounts of nuclear materials in environmental samples.