Functionalization of Multi Carbon Nanotubes with 1,2‐Naphthoquinone‐4‐sulfonic Acid Sodium: A Novel Sulphydryl Compounds Sensor Based on Functionalized Carbon Nanotube Film Using Michael Addition

The functionalized multi‐wall carbon nanotube with 1,2‐naphthoquinone‐4‐sulfonic acid sodium (Nq‐MWNT) was fabricated by a simple and low‐cost method. Techniques of scanning electron microscope (SEM) with energy dispersive X‐ray (EDX) analysis, fourier transform infrared spectroscopy (FT‐IR), ultraviolet visible spectroscopy (UV‐vis) and cyclic voltammetry (CV) were used to characterize the property of the Nq‐MWNT. The results showed that the MWNT with high functionalization of Nq can be obtained using this simple method. The Nq‐MWNT modified carbon paste electrode (Nq‐MWNT/CPE) was fabricated by drop‐casting technique. The resulted modified electrode was tested successfully to detection D‐penicillamine (D‐PA) and captopril (CAP) in an aqueous solution. It is found that D‐PA and CAP participate in Michael addition reaction with Nq on MWNT to form the corresponding thioquinone derivative. The reoxidation of adducts at a potential of less positive than D‐PA and CAP at the surface of the bare CPE leads to an increase in the oxidative current, which is proportional to the concentration of D‐PA and CAP. The catalytic response showed a wide linear range (3‐200 μM and 1‐130 μM for D‐PA and CAP, respectively) as well as its experimental limit of detection can be achieved 0.8 μM, and 0.4 μM for D‐PA and CAP, respectively. The modified electrode for D‐PA and CAP determination is of the property of simple preparation, good stability and high sensitivity. Furthermore, the fabricated electrode was used to determine the content of D‐PA and CAP in the tablet, suggesting the good accuracy of the method.     

Gel-assisted synthesis of anatase TiO2 nanoparticles and application for electrochemical determination of L-tryptophan

Anatase titanium dioxide nanoparticles (TiO₂-NPs) were synthesized with and without gelatin via the sol-gel method. The TiO₂-NPs were characterized by a number of techniques, such as thermogravimetric analysis (TGA), X-ray diffraction analysis (XRD), transmission electron microscopy (TEM), fourier transform infrared spectroscopy (FT-IR) and ultraviolet visible spectroscopy (UV-Vis). The particle sizes of the TiO₂-NPs prepared with and without gelatin were ～13 and ～17 nm, respectively. The main advantage of using gelatin as a stabilizing agent is that it provides long-term stability for nanoparticles by preventing particles agglomeration. The results indicated that gelatin was a reliable green stabilizer, which can be used as a polymerization agent in the sol-gel method for synthesis of tiny size TiO₂-NPs. Moreover, the composite film was prepared by synthesized TiO₂-NPs nanoparticles and multi wall carbon nanotube (MWNT) on glassy carbon electrode (TiO₂-MWNT/GCE). The TiO₂-MWNT/GCE responded linearly to L-tryptophan (L-Trp) in the concentration of 1.0 × 10^?6 to 1.5 × 10^?4 M with detection limit of 5.2 × 10^?7 M at 3 using amperometry. The studied sensor exhibited good reproducibility and long-term stability.     

A comparative study of first-derivative spectrophotometry and high-performance liquid chromatography applied to the determination of losartan potassium in tablets

Losartan, a highly effective blood pressure-lowering agent, has been widely used for the treatment of hypertension. A fast and reliable method for the determination of losartan was highly desirable to support formulation screening and quality control. A first-derivative UV spectroscopic method and HPLC were developed for the determination of losartan in the tablet dosage form. The first-derivative spectrum recorded between 220 and 320 nm and a zero-crossing technique for first-derivative measurement at 232.5 nm were selected. The selectivity and sensitivity of the method was in desirable range. In comparison with the direct UV method, first-derivative UV spectroscopy has a definite trough without any interference from UV absorbing-excipients. This method is also fast and economical in comparison with the more time-consuming HPLC method regularly used for formulation screening and quality control and can be used routinely by any laboratory possessing a spectrophotometer with a derivative accessory. The linear concentration ranges were 2-50 microg ml(-1), (D(1)=-0.0159C-0.0056, r=0.9994, n=6). Between-days CV of < or =2.9%, within-day CV of < or =2.1%, and analytical recovery close to 98.1% show the suitability of the method for determination in quality control.     

Direct electrochemistry and bioelectrocatalysis of a class II non-symbiotic plant haemoglobin immobilised on screen-printed carbon electrodes

In this study, direct electron transfer (ET) has been achieved between an immobilised non-symbiotic plant haemoglobin class II from Beta vulgaris (nsBvHb2) and three different screen-printed carbon electrodes based on graphite (SPCE), multi-walled carbon nanotubes (MWCNT-SPCE), and single-walled carbon nanotubes (SWCNT-SPCE) without the aid of any electron mediator. The nsBvHb2 modified electrodes were studied with cyclic voltammetry (CV) and also when placed in a wall-jet flow through cell for their electrocatalytic properties for reduction of H₂O₂. The immobilised nsBvHb2 displayed a couple of stable and well-defined redox peaks with a formal potential (E°′) of ?33.5 mV (vs. Ag|AgCl|3 M KCl) at pH 7.4. The ET rate constant of nsBvHb2, k _s, was also determined at the surface of the three types of electrodes in phosphate buffer solution pH 7.4, and was found to be 0.50 s^?1 on SPCE, 2.78 s^?1 on MWCNT-SPCE and 4.06 s^?1 on SWCNT-SPCE, respectively. The average surface coverage of electrochemically active nsBvHb2 immobilised on the SPCEs, MWCNT-SPCEs and SWCNT-SPCEs obtained was 2.85?×?10^?10 mol cm^?2, 4.13?×?10^?10 mol cm^?2 and 5.20?×?10^?10 mol cm^?2. During the experiments the immobilised nsBvHb2 was stable and kept its electrochemical and catalytic activities. The nsBvHb2 modified electrodes also displayed an excellent response to the reduction of hydrogen peroxide (H₂O₂) with a linear detection range from 1 μM to 1000 μM on the surface of SPCEs, from 0.5 μM to 1000 μM on MWCNT-SPCEs, and from 0.1 μM to 1000 μM on SWCNT-SPCEs. The lower limit of detection was 0.8 μM, 0.4 μM and 0.1 μM at 3σ at the SPCEs, the MWCNT-SPCEs, and the SWCNT-SPCEs, respectively, and the apparent Michaelis–Menten constant, $ {\hbox{K}}_{\rm{M}}^{\rm{app}} $ , for the H₂O₂ sensors was estimated to be 0.32 mM , 0.29 mM and 0.27 mM, respectively.     

Functionalization of Graphene Oxide with 3‐Mercaptopropyltrimethoxysilane and Its Electrocatalytic Activity in Aqueous Medium

In this work, a highly dispersed graphene oxide (GO) was successfully functionalized with 3‐mercaptopropyltrimethoxysilane (MPTS) molecule by silanization method. The chemically generated GO and MPTS functionalized GO (MPTS‐GO) were structurally characterized by thermogravimetric analysis (TGA), X‐ray diffraction analysis (XRD), scanning electron microscope (SEM), energy dispersive X‐ray (EDAX), fourier transform infrared spectroscopy (FT‐IR) and ultraviolet visible spectroscopy (UV‐Vis) techniques. The MPTS‐GO is highly suspensable in water. The thermal and conductivity results for MPTS‐GO are significantly increased compared to GO. Moreover, glassy carbon electrode modified with MPTS‐GO hybrid (MPTS‐GO/GCE) was prepared by casting of the MPTS‐GO solution on GCE. The MPTS‐GO/GCE showed an excellent electrocatalytic activity towards methionine (Met). This was understood from the observed less positive oxidation potential and higher oxidation current when compared to bare GC electrode. The MPTS‐GO has excellent electrocatalytic activity, making it an ideal candidate for sensor applications.     

Green synthesis of silver nanoparticles by pepper extracts reduction and its electocatalytic and antibacterial activity

Stable silver nanoparticles were synthesized with the aid of a novel, non-toxic, eco-friendly biological material namely, green pepper extract. The aqueous pepper extract was used for reducing silver nitrate. The synthesized silver nanoparticles were analyzed with transmission electron microscopy (TEM), X-ray diffraction (XRD) and energy dispersive spectrometer (EDS). TEM image shows the formation of silver nanoparticles with average particle size of 20 nm which agrees well with the XRD data. The main advantage of using pepper extract as a stabilizing agent is that it provides long-term stability for nanoparticles by preventing particles agglomeration. To investigate the electrocatalytic efficiency of silver nanoparticles, silver nanoparticles modified carbon-paste electrode (AgNPs–CPE) displayed excellent electrochemical catalytic activities towards hydrogen peroxide (H₂O₂) and hydrogen evolution reaction (HER). The reduction overpotential of H₂O₂ was decreased significantly compared with those obtained at the bare CPE. An abrupt increase of the cathodic current for HER was observed at modified electrode. Also, the antibacterial activity of silver nanoparticle was performed using Escherichia coli and Salmonellae. The approach of plant-mediated synthesis appears to be cost efficient, eco-friendly and easy methods.     

Study on the Interaction of the CpG Alternating DNA with CdTe Quantum Dots

A novel sensitive method for detection of DNA methylation was developed with thioglycollic acid (TGA)-capped CdTe quantum dots (QDs) as fluorescence probes. Recognition of methylated DNA sites would be useful strategy due to the important roles of methylation in disease occurrence and developmental processes. DNA methylation occurs most often at cytosine-guanine sites (CpG dinucleotides) of gene promoters. The QDs significantly interacted with hybridized unmethylated and methylated DNA. The interaction of CpG rich methylated and unmethylated DNA hybrid with quantum dots as an optical probe has been investigated by fluorescence spectroscopy and electrophoresis assay. The fluorescence intensity of QDs was highly dependent to unmethylated and methylated DNA. Specific site of CpG islands of Adenomatous polyposis coli (APC), a well-studied tumor suppressor gene, was used as the detection target. Under optimum conditions, upon the addition of unmethylated dsDNA, the fluorescence intensity increased in linear range from 1.0?×?10^??10 to 1.0?×?10^??6M with detection limit of 6.2?×?10^??11 M and on the other hand, the intensity of QDs showed no changes with addition of methylated dsDNA. We also demonstrated that the unmethylated and methylated DNA and QDs complexes showed different mobility in electrophoresis assay. This easy and reliable method could distinguish between methylated and unmethylated DNA sequences.