Normal human dermal fibroblasts: proteomic analysis of cell layer and culture medium.

Proteins present within the cell layer and those released in the cell medium from in vitro cultured normal human dermal fibroblasts were separated and characterized in terms of their isoelectric point and molecular weight, by two-dimensional (2-D) gel electrophoresis. All spots in the synthetic gel were firstly analyzed by the Melanie 3 software and compared with those of breast cancer cells, colorectal epithelial cells, HL60, lymphoma cells, and platelets, already available on-line. From the identification of 144 spots from both the cell layer and the medium, we were able to recognize 89 different proteins, since a certain number of spots represented different isoforms of the same molecule. Identifications were performed by matching with on-line 2-D databases, and by matrix assisted laser-desorption/ionization-time of flight-mass spectrometry (MALDI-TOF-MS), in order to confirm the identification by matching, or to identify new proteins. The procedure we used allows (i) to design a highly reproducible reference map of the proteome of adult human normal fibroblasts in culture, (ii) to evaluate protein species produced in the cell layer as well as those released in the culture medium, and (iii) to compare data from gel matching with those obtained by MS. This work represents an essential step for a better knowledge of mesenchymal cells, given the widespread use of this cell type in both clinical and experimental investigations.     

Statistical Analysis of the Effect of Mineral Admixtures on the Strength of the Interfacial Transition Zone

Microscopic evidence indicates that the thickness of the interfacial transition zone (ITZ) between the aggregate and the cement paste is modified when mineral admixtures partially replace portland cement. Unfortunately, there is limited information on the significance of these microscopic modifications to the mechanical properties of the ITZ. This research reports experimental results on the shear and tensile strength of the ITZ as affected by the addition of the following mineral admixtures: silica fume, fly ash, and natural pozzolan. Statistical analysis was used to identify the significant parameters affecting the tensile and shear strength of the ITZ. Experimental results indicate that not only does the incorporation of silica fume and fly ash increase the strength of the ITZ, these mineral admixtures have a greater influence on the strength increase of the ITZ than in the strength increase of the cement paste.     

Cems characterization of SnO2 films obtained by sputtering and sol-gel route

Conversion electron Mössbauer spectroscopy (CEMS) has been used to study tin oxide films prepared by sol-gel dipping and sputtering. The spectra of films prepared by sol-gel route result close to that of crystalline SnO₂ after heat treatment at a temperature as low as 150°C. The Mössbauer parameters of as sputter deposited films indicate that the structure of the deposited stannic oxide has an amorphous character more pronounced for thinner samples. The structure becomes predominantly that of crystalline SnO₂ by heating at 550°C for 30 min provided the film thickness is higher than 10 nm.     

Non-local approximation of the Mumford-Shah functional

The Mumford-Shah functional, introduced to study image segmentation problems, is approximated in the sense of -convergence by a sequence of non-local integral functionals. Received June 6, 1996 / Accepted July 11, 1996     

DRIFTS study of surface reactivity to NO2 by zinc nanoparticle aggregates and zinc hollow nanofibers

Zinc nanostructures synthesized with different morphologies from the same evaporation/condensation technique are studied with concern to surface reactivity to NO₂ by Diffuse Reflectance Infrared Fourier Transformed Spectroscopy (DRIFTS). Synthesis of nanopowders is obtained, according to previous work, by gas flow thermal evaporation at 540 °C of bulk Zn grains. Two types of Zn powders are obtained and studied in experiments. The first one is collected on the cold walls of the reactor as a deposit produced by thermophoretic effect. It is constituted by grains (∼10 μm) originated by the stratification of smaller aggregates (∼200 nm) and isolated primary particles (∼50 nm) born in the gas flow. The second type of powder is grown from the condensation of Zn chemical vapors within the expansion orifice of the quartz reactor after relatively long time (∼1 h) deposition process. It is constituted mainly by hollow Zn nanofibers with external and internal diameter about 100 and 60 nm. Preliminary characterization of the two types of powders is made by SEM, TEM, XRD. Thereafter, the two types of samples are studied by DRIFTS at variable temperature (VT). Comparison is made between the home-synthesized nanopowders with respect to commercial Zn standard dust. The Zn hollow nanofibers when exposed to NO₂ are found to exhibit dramatic reactivity, which is not observed at all either in the case of clustered aggregate zinc or of commercial Zn dust powders. Results indicate that, at increasing temperature from RT to 300 °C, the hollow nanofibers surface reacts distinctively with adsorbant gas NO₂, with contemporary formation of a progressively growing narrow absorption band at 2500 cm⁻¹ and contemporary depression of a doublet (∼1600-1628 cm⁻¹) band. In order to justify this striking spectral feature, we propose the occurring of a possible polymerization process at nanofibers surface where most probably as a consequence of pre-treatment and exposure to gas NO₂ a very thin film of ZnO is formed. The possible role of huge specific surface of hollow nanofibers as inferred by preliminary SEM, TEM, XRD studies is discussed.     

r,r′-联吡啶桥联Cu,Rh配合物的合成、晶体结构和ESR谱

合成了r,r’-联吡啶为桥的异双核配合物[(H_2O)Cu(dien)(μ-r,r’-bpy)Rh(NH_3)_5](ClO_4)_5·H_2O.研究了单晶结构和ESR谱.晶体属正交晶系,空间群Pbca,晶胞参数:a=14.425(1),b=29.589(2),c=16.893(6)A,Z=8.偏离因子R=0.065.分子中Cu~(2+)和Rh~(3+)分别取五配位的四方锥和六配位的八面体构型,联吡啶桥的2个吡啶面夹角为51°.依据ESR谱计算了3配合物中Cu~(2+)的键参数并讨论了Cu~(2+)的成键性质.     

Ab initio and variational transition state approach to beta-C3N4 formation: kinetics for the reaction of CH3NH2 with H

The CH3NH2 molecule has been considered as either an important intermediate in methane and ammonia mixtures or a precursor in methylamine and hydrogen mixtures in the synthesis of carbon nitride thin films. The fast Hydrogen (H) abstraction from CH3NH2 is an important process involved in the formation of HCN or CNH in the chemical vapor deposition (CVD) of carbon nitride thin films. The energetic and kinetic characteristics of the H abstraction reaction from CH3NH2 by atomic H used in CVD of beta-C3N4 were studied using ab initio direct dynamics methods for the first time. Two primary processes were identified for this reaction: H abstraction from the CH3 group and H abstraction from the NH2 group. On the basis of ab initio data, the rate constants of each channel have been deduced by canonical variational transition state theory with small-curvature tunneling correction over a wide temperature range of 200 to approximately 3000 K. The theoretical results were compared with available experimental data.     

热致型液晶聚合物的等温和非等温晶化动力学

利用等温和非等温方法详细研究了芳香族聚酯──热致型聚合物对，对’－联苯二甲酸二辛酯的结晶相和液晶相形成机理，并计算了相变过程中的表面自由能与温度系数，研究结果表明：从介晶相开始的结晶过程是二维异相成核、三维线性增长的，而从各向同性液相开始的液晶相形成过程则是二维异相成核二维线性增长的．对两个晶化过程的表面自由能的研究表明，该聚合物液晶相形成过程的相转变表面自由能比结晶过程小得多，预示了它将具有更大的晶化速率．研究还发现，该聚合物的液晶相形成过程具有比结晶过程大得多的温度敏感性．     

Cohesive energy densities of polyethers: Poly(hexamethylene oxide)

The solubility parameter of poly(hexamethylene oxide) has been estimated by measuring solution viscosities and by turbidimetric titrations in a series of solvents. From both experimental methods, a value of $\text{δ}{}_{\mathrm{<mtext>p</mtext>}}\text{= 33.9}\text{J}{}^{\mathrm{<mtext>1</mtext><mtext>2</mtext>}}\text{cm}{}^{\mathrm{<mtext>?3</mtext><mtext>2</mtext>}}$ ($\text{8.1}\text{cal}{}^{\mathrm{<mtext>1</mtext><mtext>2</mtext>}}\text{cm}{}^{\mathrm{<mtext>?3</mtext><mtext>2</mtext>}}$) was obtained, whence the cohesive energy density is 274.5 J cm^?3 (65.6 cal cm^?3). These experimental values are compared with those calculated by empirical methods.