How to embed three-dimensional flexible electrodes in microfluidic devices for cell culture applications

This communication describes a simple, rapid and cost effective method of embedding a conductive and flexible material within microfluidic devices as a means to realize uniform electric fields within cellular microenvironments. Fluidic channels and electrodes are fabricated by traditional soft-lithography in conjunction with chemical etching of PDMS. Devices can be deformable (thus allowing for a combination of electro-mechanical stimulation), they are made from inexpensive materials and easily assembled by hand; this method is thus accessible to a wide range of laboratories and budgets.     

Transfer measurements for the Ti+Ni systems at near barrier energies

Large enhancements have been observed in the sub-barrier fusion cross sections for Ti+Ni systems in our previous studies. Coupled channel calculations incorporating couplings to 2⁺ and 3⁻ states failed to explain these enhancements completely. A possibilty of transfer channels contributing to the residual enhancements had been suggested. In order to investigate the role of relevant transfer channels, measurements of one- and two-nucleon transfer were carried out for ^46,48Ti+⁶¹Ni systems. The present paper gives the results of these studies.     

Effect of spatial heterogeneity on level of rejuvenation in Ni80P20 metallic glass

Understanding the relation between spatial heterogeneity and structural rejuvenation is one of the hottest topics in the field of metallic glasses (MGs). In this work, molecular dynamics (MD) simulation is implemented to discover the effects of initial spatial heterogeneity on the level of rejuvenation in the Ni$_{80}$P$_{20 }$MGs. For this purpose, the samples are prepared with cooling rates of $10^{10}$ K/s-$10^{12}$ K/s to make glassy alloys with different atomic configurations. Firstly, it is found that the increase in the cooling rate leads the Gaussian-type shear modulus distribution to widen, indicating the aggregations in both elastically soft and hard regions. After the primary evaluations, the elastostatic loading is also used to transform structural rejuvenation into the atomic configurations. The results indicate that the sample with intermediate structural heterogeneity prepared with 10$^{11}$ K/s exhibits the maximum structural rejuvenation which is due to the fact that the atomic configuration in an intermediate structure contains more potential sites for generating the maximum atomic rearrangement and loosely packed regions under an external excitation. The features of atomic rearrangement and structural changes under the rejuvenation process are discussed in detail.     

A host-guest optical sensor for aliphatic amines based on lipophilic cyclodextrin

A host-guest optical sensor for the determination of aliphatic amines as exemplified by octylamine is proposed. It is based on the reversible fluorescence enhancement of heptakis(2,6-di-O-isobutyl)-β-cyclodextrin(DOB-β-CD) hosting tetraphenylporphyrin (TPP) immobilized in poly(vinyl chloride) (PVC) membrane by aliphatic amine extracted from aqueous phase into membrane phase. The optimum membrane contained 1.15 wt % TPP, 6.15 wt % DOB-β-CD as sensing reagent and other membrane materials. The fluorescence enhancement of the membrane resulted from the formation of a stable three-component complex among DOB-β-CD, TPP, and aliphatic amines. With the optimum conditions described, the fluorescence response of the sensor to octylamine shows a good correlation with the theoretically derived equation in the range 1.0 × 10^–6 to 8.0 × 10^–4 mol/L. The response characteristics including reversibility, response time, reproducibility and lifetime and selectivity of this optical device are also discussed in detail. This sensor has also been applied for the determination of octylamine in water samples containing interferents with satisfactory recovery.     

Investigation of the quantitative properties of the quadrupole orthogonal acceleration time-of-flight mass spectrometer with electrospray ionisation using 3,4-methylenedioxymethamphetamine

This paper describes the investigation of the potential of a quadrupole orthogonal acceleration time-of-flight mass spectrometer (Q-TOF) equipped with an atmospheric pressure ionisation interface for quantitative measurements of small molecules separated by reversed phase liquid chromatography. To this end, the detection limits and linear dynamic range in particular were studied in an LC/MS/MS experiment using 3,4-methylenedioxymethamphetamine standards and 3,4-methylenedioxyethylamphetamine for internal standardisation. In a second phase, the experiment was repeated with real biological extracts (whole blood, serum, and vitreous humour). A calibration for 3,4-methylenedioxymethamphetamine and its metabolite 3,4-methylenedioxyamphetamine was prepared in each of these matrices again using 3,4-methylenedioxyethylamphetamine as internal standard. The resulting quantitative data were compared with those obtained by liquid chromatography with fluorescence detection for the same extracts. The Q-TOF results revealed excellent sensitivity and a linear dynamic range of nearly four decades (2-10 000 pg on-column, r(2) = 0.9998, 1/x weighting). Furthermore, all the calibration curves prepared in biological material were superimposable, LC/MS/MS and LC-fluorescence, and the quantitative results for actual samples compared very favourably. It was concluded that the Q-TOF achieves a linear dynamic range for quantitative LC/MS/MS work exceeding that of fluorescence detection and at much better absolute sensitivity. Copyright 1999 John Wiley & Sons, Ltd.     

A study of some parameters relevant to the response of harwell PMMA dosimeters to gamma and electron irradiation

The effects on the radiation response of Harwell polymethylmethacrylate (PMMA) dosimeters of dose-rate, radiation type, temperature during irradiation and post-irradiation storage, and post-irradiation stability, are of importance to the operators of commercial irradiation facilities.

This paper describes recent studies of the effects of some of these parameters on the radiation response of Harwell Red 4034, Amber 3042, and Gammachrome YR Perspex dosimeters, and provides data on batch to batch variation and shelf-life.     

Organic interferences and their elimination in the 2,4-xylenol spectrophotometric method for nitrate

The 2,4-xylenol spectrophotometric method for nitrate involves formation of 6-nitro-2,4-xylenol, which is steam-distilled into an ammonia—water—isopropanol mixture. The yellow color of the ammonium salt of 6-nitro-2,4-xylenol is measured at 455 nm. A detailed study of the possible interferences from 123 representative organic compounds is described; 61 compounds interfered (when present in amounts of 0.1 g in the original sample). The interfering compounds can be classified according to their mode of interference: (1) compounds that are readily nitrated or oxidized by nitrate in the sulfuric acid medium used cause low results; (2) compounds containing the ONO₂ group that hydrolyze to nitrate cause high results; (3) compounds that steam-distil to produce colored solutions; (4) compounds that steam-distil to produce turbid solutions; (5) compounds that hydrolyze, either in water or sulfuric acid solution, to produce inorganic ions or compounds (e.g. Cl^-, S^2-, and H₂O₂) that repress the color development. Three procedures are described for the elimination of the interferences: (1) oxidation of the organic compound with permanganate, reduction of the excess of permanganate with hydrogen peroxide, and destruction of the peroxide by boiling in the presence of Fe(III) catalyst (this is unsuitable for organic compounds containing nitrogen, as there is invariably some oxidation to nitrate); (2) extraction of interfering organic compounds with methyl isobutyl ketone; (3) precipitation—adsorption method involving treatment with zinc sulfate and sufficient sodium hydroxide to precipitate most of the zinc as zinc hydroxide, addition of 3 g of activated carbon, digestion at 55–65°C for 20 min. cooling, dilution, and filtration. Method (3) is applicable to all organic compounds tested except formaldehyde. The amount of organic compound used to test the methods was normally 0.25 g in the solution being treated.     

Preferred conformations of enol ethers in solution: Detection of an equilibrium by kinetic nuclear overhauser effects

n.O.e. difference spectra reveal that the preferred solution conformation of methyl enol ethers has the methyl group $\text{syn}$-periplanar to the double bond; n.O.e kinetics in a methoxy—heptatriene demonstrate the presence of both possible periplanar conformations, the energy difference being $\text{ca}$ 1 kcal/mole.     

Study of the behaviour of various phenolic compounds in the 4-aminoantipyrine and ultraviolet-ratio spectrophotometric methods without and with distillation

It is customary in industrial analysis in the determination of phenols by the 4-aminoantipyrine (4-AAP) and ultraviolet-ratio spectrophotometric methods to report the total of phenolic compounds as phenol. A study was therefore made of the behaviour of 36 representative phenolic compounds in the 4-AAP and UV-ratio methods, with and without distillation, to ascertain the apparent recoveries relative to that for phenol. The Fisher phenol analyser was used for the UV-ratio method, which depends upon the bathochromic shift (from about 270 to about 290 nm) usually obtained when the solution of the phenol is made alkaline. The apparent recoveries by the 4-AAP method both with and without distillation varied from 0 to 100%. The apparent recoveries by the UV-ratio method without distillation varied from 0 to 148%, and those with distillation varied from 0 to 110%. Sixteen of the compounds tested without distillation gave less than 10% recovery by the 4-AAP method and eleven gave less than 10% recovery by the UV-ratio method. The results after distillation indicated that several of the compounds did not distil completely.