Crystal and molecular structures of 1-[3-(3,4-dimethoxyphenyl)-2-propenoyl]pyrrolidine.

The crystal structure of 1-[3-(3,4-dimethoxyphenyl)-2-propenoyl]pyrrolidine (C15H19NO3) (I) has been determined by X-ray analysis. It crystallizes orthorhombic space group Pbca with a = 24.295(3), b = 15.086(3), c = 7.552(3)A, V = 2768(1)A3, Z = 8, Dcalc = 1.254 g/cm3, mu = (Mo K(alpha)) = 0.87 cm(-1). The title compound has analgesic activity of cycloaliphatic amine part. The molecule is deviated from planar configuration.     

Darstellung und Struktur von Pyrazolyl-Kationen mit Polymethin- und Methan-Gerüst

The 4-pyrazoline-3-one1 reacts with 4-dimethylaminobenzaldehyde to yield the stable asymmetric cyanine dye2b which reacts with1 to give the colorless (aryl) (dipyrazolyl) methane3b. Using aldehydes with less cationstabilizing groups the polymethines2 are not isolated but only the methanes3. The structures of2b and3 are discussed by¹ H,¹³C and Hetero NMR spectra.     

A novel biosensor for specific determination of hydrogen peroxide: catalase enzyme electrode based on dissolved oxygen probe

A biosensor for the specific determination of hydrogen peroxide was developed using catalase (EC 1.11.1.6) in combination with a dissolved oxygen probe. Catalase was immobilized with gelatin by means of glutaraldehyde and fixed on a pretreated teflon membrane served as enzyme electrode. The electrode response was maximum when 50 mM phosphate buffer was used at pH 7.0 and at 35 degrees C. The biosensor response depends linearly on hydrogen peroxide concentration between 1.0x10(-5) and 3.0x10(-3) M with a response time of 30 s. The sensor is stable for >3 months so in this period >400 assays can be performed.     

Concanavalin a immobilized affinity adsorbents for reversible use in yeast invertase adsorption

Concanavalin A (Con A) immobilized poly(2-hydroxyethyl methacrylate) (PHEMA) beads were investigated for specific adsorption of yeast invertase from aqueous solutions. PHEMA beads were prepared by a suspension polymerization technique with an average size of 150-200 microm, and activated by epichlorohydrin. Con A was then immobilized by covalent binding onto these beads. The maximum Con A immobilization was found to be 10 mg/g. The invertase-loading capability of the PHEMA/Con A beads was 107 mg/g. The maximum invertase adsorption capacity on the PHEMA/Con A adsorbents was observed at pH 5.0. The values of the Michaelis constant K(m) of invertase were significantly larger upon adsorption, indicating decreased affinity by the enzyme for its substrate, whereas V(max) was smaller for the adsorbed invertase. Adsorption improved the pH stability of the enzyme as well as its temperature stability. Thermal stability was found to increase with adsorption. The adsorbed enzyme activity was found to be quite stable in repeated experiments. Storage stability of adsorbed invertase.     

A proposal for a convertible stadium roof structure derived from Watt-I linkage

In this paper, a novel convertible stadium roof structure is introduced, which has been derived from a special geometric configuration of Watt-I linkage, a 1-DoF mechanism used in robot technologies as anthropomorphic fingers. The proposed structure can offer a wide range of different shape configurations according to the environmental conditions and spatial needs, thus offering several aesthetic and functional advantages over existing solutions. This paper serves as a feasibility investigation of this concept, mainly from geometric and structural point of view. To that affect, first kinematic analysis and geometric design of this linkage are introduced. Then, structural analyses of the proposed structure with realistic dimensions and loading conditions are performed in three different geometric configurations, in order to discuss strength and stiffness limitations. Finally, potential cover materials and actuators are briefly discussed.     

Comparative Study of Biosorption of Heavy Metals Using Living Green Algae Scenedesmus quadricauda and Neochloris pseudoalveolaris: Equilibrium and Kinetics

The biosorption of several heavy metals such as cobalt(II), chromium(III), lead(II), cadmium(II), nickel(II), and manganese(II) from aqueous systems on living microalgae cultures, Scenedesmus quadricauda and Neochloris pseudoalveolaris were studied under laboratories conditions. The kinetic and statistical parameters were calculated by using the data obtained from batch cultivation and well fitted a pseudo-first-order rate equation. The initial metal concentrations in solution were about 5–40 mg · L^?1. According to the pseudo-second-order model, the biosorption capacities of Scenedesmus quadricauda for Co(II), Cr(III), Pb(II), Cd(II), Ni(II), and Mn(II) ions were found in the ranges of 2.14–52.48, 1.98–81.98, 8.05–4.26, 7.81–24.96, 2.17–55.71, and 3.54–75.20 mg g^?1, respectively. Kinetic studies revealed that the metal uptake capacity of each living green algae was rather fast. It was also observed that the biosorption kinetic rate decreased with increasing concentration for both microalgae. The application of diffusion-controlled models to the experimental results indicated that the contribution of intraparticle diffusion to the overall sorption kinetics was not very important. Results showed that Co(II), Cr(III), Pb(II), Cd(II), Ni(II), and Mn(II) ions could effectively be absorbed by using living microalga cultures from aqueous solutions.     

Reversible Immobilization of Urease by Using Bacterial Cellulose Nanofibers

In this work, bacterial cellulose nanofibers were produced by using the Gluconacetobacter hansenii HE1 strain. These nanofibers were derivatized with dye affinity ligand Reactive Green 5, and these newly synthesized dye-attached nanofibers were used for affinity adsorption of urease. Reactive Green 5-attached nanofibers were characterized by Fourier transform infrared spectroscopy, SEM, and energy-dispersive x-ray spectroscopy analysis. Some adsorption conditions which significantly affect the adsorption efficiency were investigated. The maximum urease adsorption capacity was found to be 240 mg/g nanofiber in pH 6.0 and at room temperature. Dye-free plain nanofibers also used for studying nonspecific urease adsorption onto plain nanofibers and nonspecific adsorption were found to be negligible (3.5 mg/g nanofiber). Prepared dye-attached nanofibers can be used in five successive adsorption/desorption steps without any decrease in their urease adsorption capacity. The desorption rate of the adsorbed urease was found to be 98.9 %. The activity of the urease was also investigated, and it was found that free and desorbed urease from the dye-attached nanofibers showed similar specific activity.     

Preparation of a 99mTc-labeled graft polymer and its in vitro and in vivo evaluation

Journal of Radioanalytical and Nuclear Chemistry - The aim of this study is the synthesis of a novel 99mTc-labeld graft polymer and the biological evaluation of its in vitro and in vivo properties....     

Poly(HEMA-co-NBMI) Monolithic Cryogel Columns for IgG Adsorption

Supermacroporous poly(2-hydroxyethyl methacrylate-co-1,5-naphthalene bismaleimide) [poly(HEMA-co-NBMI)] monolithic cryogel column was prepared by free radical cryo-copolymerization of HEMA with NBMI as a hydrophobic functional comonomer and N,N′-methylene-bisacrylamide as cross-linker directly in a plastic syringe for adsorption of albumin. The monolithic cryogel contained a continuous polymeric matrix which has interconnected pores of 10–100 μm size. Poly(HEMA-co-NBMI) cryogel was characterized by swelling studies, FTIR and scanning electron microscopy. The equilibrium swelling degree of the poly(HEMA-co-NBMI) cryogel was 10.5 g of H₂O/g dry cryogel. Poly(HEMA-co-NBMI) cryogel was used in the adsorption/desorption of IgG from aqueous solutions. The maximum amount of IgG adsorption from aqueous solution in phosphate buffer was 98.20 mg/g polymer at pH 7.0. The nonspecific adsorption of IgG onto plain poly(HEMA) cryogel was very low (2.79 g/g polymer). It was observed that IgG could be repeatedly adsorbed and desorbed with the poly(HEMA-co-NBMI) cryogel without significant loss of adsorption capacity.     

Frequency response investigations of multi-input multi-output nonlinear systems using automated symbolic harmonic balance method

The frequency response characteristics of MIMO systems are investigated by using harmonic balance equations. For this purpose, the algorithm for the automatic generation of harmonic balance equations is extended to include MIMO systems. Then the method is applied to obtain the frequency response of an example model having two-input and two-output. Both the frequency response and its harmonics are validated by numerical solutions. The effect of input amplitude variations and phase differences of inputs on the frequency response are investigated. Direct computation of the resonance parameters depending on input amplitude and phase variations are also obtained for the example system.