Reactions of lignin in chlorine dioxide bleaching of kraft pulps

The reactions between chlorine dioxide and the residual lignin in oxygen-bleached softwood kraft pulps have been studied. In a first series, isolated lignin samples have been subjected to chlorine dioxide oxidation at different pH values and subsequently analysed by oxidative degradation and elemental analysis. Different analytical techniques have also been employed to follow the gradual chemical changes in lignins isolated from kraft pulps after each of the bleaching stages in the OD(EOP)DD sequence. The results demonstrate that, in order to minimize chlorination of the lignin, the first chlorine dioxide stage should be carried out at a pH around or above three. At this pH level, a high degree of lignin oxidation is also achieved. A certain (mono)-chlorination of the lignin in the first D stage cannot be avoided, but this chlorine is to a large extent removed in the later bleaching stages. The efficient and non-selective oxidation of the various phenolic lignin end groups by chlorine dioxide is clearly illustrated by the analytical data. Moreover,¹³C NMR reveals that reduced lignin structures formed during the kraft cook survive the oxidative bleaching stages to a large extent.     

Reconfigurable atom chip on a transparent ferrite-garnet film

We introduce a new choice of material for the creation of microscopic magnetic potentials for the trapping and guiding of ultracold neutral atoms. The potentials are created above a ferrimagnetic, transparent (BiYTmGd)₃(FeGa)₅O₁₂ film by patterning the magnetic-domain structure in the film with a magneto-optical recording method. Patterns with linewidth down to 2 μm have been achieved, enabling trap frequencies of the order of 100 kHz for ⁸⁷Rb atoms in the state |F=1, m_F=-1〉. The main advantages of the material are: 1) magnetic-field noise is suppressed due to the dielectricity of the material and the absence of electric currents, 2) trapped atoms can be addressed optically through the transparent film, and 3) the film can be repatterned, which enables different experiments with the same component.     

A microbiological six-plate method for the identification of certain antibiotic groups in incurred kidney and muscle samples

A microbiological method was developed for group level identification of antibiotics in incurred kidney and muscle samples from cattle and pigs. The method was composed of six test bacterium-plate growth medium combinations and the result was recorded as a profile of growth inhibition zones. The sample profiles were compared to two sets of references: one constructed with standard antibiotic solution profiles, and the other with these combined with profiles of microbiologically and chemically identified residues from incurred samples. The algorithm employed in profile comparison located the minimal sum of absolute pairwise differences over the tests, with the addition of a number of experimentally observed intra-test criteria. Chemical identification and quantitation of incurred residues was based on liquid chromatography. The method identified penicillin G as a penicillinase sensitive penicillin, enrofloxacin and ciprofloxacin belonging to fluoroquinolone group, and oxytetracycline belonging to tetracycline group. Each of these residues was microbiologically identified below the Maximum Residue Limit (MRL) for kidney tissue. Combining sample profiles with the standard reference data set did not enhance the resolution. Microbiological and chemical identification test results were in good agreement. The results of this study show that a microbiological identification method is a useful tool in preliminary characterisation of antibiotic residues in animal tissues.     

Rescattering production of dileptons in nucleus-nucleus collisions

We present a space-time formulation for the rescattering of hard partons produced in primary QCD subcollisions within a nucleus-nucleus collision. As an application we calculate the rescattering rate for dilepton production in 100 GeV/A+100 GeV/A uranium-uranium collisions.     

Raman and FTIR spectroscopic characterization of electrochemically synthesized poly(triphenylamine), PTPA

Triphenylamine was electrochemically polymerized in a mixture of toluene and acetonitrile with different electrolyte salts. The poly(triphenylamine) (PTPA) films are insoluble in polar solvents and show high stability and no degradation or loss in electrochemical properties when stored in a laboratory atmosphere. The PTPA films were characterized in situ by FTIR external reflection spectroscopy and by Raman spectroscopy. Electronic Publication     

Polarization effects for W± and Z0 production in pp collisions

Polarization effects for the leptonic decays of W^± and Z⁰ are calculated and discussed in $\text{p}\text{p}$ collisions with longitudinally polarized proton beams. Numerical examples are given for the CERN $\text{p}\text{p}$ collider and Fermilab Tevatron.     

Comparative yields of alkali elements and thallium from uranium irradiated with GeV protons,3He and12C

Mass-separated ion beams of the alkali elements Na, K, and Fr, and of the element Tl, were produced by bombarding a uranium target with 600 MeV protons, 890 MeV³He^{2 +}, and 936 MeV¹²C^{4 +}. Isotopic production yields are reported. In the case of the¹²C beam, these are thick target yields. Absolute cross-sections for the proton beam data were deduced by normalizing the delay-time corrected yield curves to measured cross-sections. For products farthest away from stability, the³He^{2 +} beam generally gives the highest yields.     

In silico prediction of drug solubility: 2. Free energy of solvation in pure melts

The solubility of drugs in water is investigated in a series of papers and in the current work. The free energy of solvation, DeltaG*(vl), of a drug molecule in its pure drug melt at 673.15 K (400 degrees C) has been obtained for 46 drug molecules using the free energy perturbation method. The simulations were performed in two steps where first the Coulomb and then the Lennard-Jones interactions were scaled down from full to no interaction. The results have been interpreted using a theory assuming that DeltaG*(vl) = DeltaG(cav) + E(LJ) + E(C)/2 where the free energy of cavity formation, DeltaG(cav), in these pure drug systems was obtained using hard body theories, and E(LJ) and E(C) are the Lennard-Jones and Coulomb interaction energies, respectively, of one molecule with the other ones. Since the main parameter in hard body theories is the volume fraction, an equation of state approach was used to estimate the molecular volume. Promising results were obtained using a theory for hard oblates, in which the oblate axial ratio was calculated from the molecular surface area and volume obtained from simulations. The Coulomb term, E(C)/2, is half of the Coulomb energy in accord with linear response, which showed good agreement with our simulation results. In comparison with our previous results on free energy of hydration, the Coulomb interactions in pure drug systems are weaker, and the van der Waals interactions play a more important role.     

In silico prediction of drug solubility. 3. Free energy of solvation in pure amorphous matter

The solubility of drugs in water is investigated in a series of papers. In this work, we address the process of bringing a drug molecule from the vapor into a pure drug amorphous phase. This step enables us to actually calculate the solubility of amorphous drugs in water. In our general approach, we, on one hand, perform rigorous free energy simulations using a combination of the free energy perturbation and thermodynamic integration methods. On the other hand, we develop an approximate theory containing parameters that are easily accessible from conventional Monte Carlo simulations, thereby reducing the computation time significantly. In the theory for solvation, we assume that DeltaG* = DeltaGcav + ELJ + EC/2, where the free energy of cavity formation, DeltaGcav, in pure drug systems is obtained using a theory for hard-oblate spheroids, and ELJ and EC are the Lennard-Jones and Coulomb interaction energies between the chosen molecule and the others in the fluid. The theoretical predictions for the free energy of solvation in pure amorphous matter are in good agreement with free energy simulation data for 46 different drug molecules. These results together with our previous studies support our theoretical approach. By using our previous data for the free energy of hydration, we compute the total free energy change of bringing a molecule from the amorphous phase into water. We obtain good agreement between the theory and simulations. It should be noted that to obtain accurate results for the total process, high precision data are needed for the individual subprocesses. Finally, for eight different substances, we compare the experimental amorphous and crystalline solubility in water with the results obtained by the proposed theory with reasonable success.     

Reconstruction of Solar Spectral Surface UV Irradiances Using Radiative Transfer Simulations

UV radiation exerts several effects concerning life on Earth, and spectral information on the prevailing UV radiation conditions is needed in order to study each of these effects. In this paper, we present a method for reconstruction of solar spectral UV irradiances at the Earth's surface. The method, which is a further development of an earlier published method for reconstruction of erythemally weighted UV, relies on radiative transfer simulations, and takes as input (1) the effective cloud optical depth as inferred from pyranometer measurements of global radiation (300–3000 nm); (2) the total ozone column; (3) the surface albedo as estimated from measurements of snow depth; (4) the total water vapor column; and (5) the altitude of the location. Reconstructed daily cumulative spectral irradiances at Jokioinen and Sodankylä in Finland are, in general, in good agreement with measurements. The mean percentage difference, for instance, is mostly within ±8%, and the root mean square of the percentage difference is around 10% or below for wavelengths over 310 nm and daily minimum solar zenith angles (SZA) less than 70°. In this study, we used pseudospherical radiative transfer simulations, which were shown to improve the performance of our method under large SZA (low Sun).