Desorption of chloroorganic compounds from a bed of activated carbon

The desorption of 1,2-dichloroethane from a bed of DTO activated carbon after adsorption from aqueous solution has been investigated. The desorption process was carried out using steam. The basic characteristics of the process were determined. The studies were performed in the temperature range 100-160 degrees C. A steam consumption indicator reduces with an increase of temperature from 100 to 140 degrees C. An elevation of temperature above 140 degrees C does not cause an improvement in the desorption efficiency. The number of performed cycles does not reduce the adsorption capacity of used activated carbon. Studies on the regeneration of the bed saturated with a seven-component mixture of chloroorganic compounds at temperature of 140 degrees C were carried out. The degree of removal of the sum of chloro-derivatives exceeded 0.96 at a volume ratio of steam (recalculated on the condensate) to bed of about 10. It was found that the dechlorination proceeds during desorption at elevated temperature. The quantitative ratio of chloro-derivatives in the desorbate was changed in comparison to the composition of wastewater directed to the adsorption.     

Synthesis,crystal structure,magnetism, and absorption spectra of A2UX5 Type Halides (A = K,Rb; X = Cl,Br, I)

The ternary uranium(III) halides A₂UX₅ (A = K, Rb; X = Cl, Br, I) have been prepared from the binary components AX and UX₃ in sealed tantalum containers. According to their Guinier X-ray powder patterns, they all crystallize with the K₂PrCl₅/Y₂HfS₅ type of structure. Lattice constants for ambient temperature are reported. Single-crystal structure refinemens were undertaken for K₂UI₅ and Rb₂UCl₅. Magnetic susceptibility data were recorded with a SQUID magnetometer from liquid helium to room temperature. One-dimensional (intrachain) and three-dimensional antiferromagnetic ordering occur at low temperatures dependent upon the U³⁺? U³⁺ distance. Absorption spectra were recorded between 4 000 and 28 000 cm^?1. They show f—f transitions typical for U³⁺ and, depending on the halide, very strong f—d transitions above 14 000 to 15 000 cm^?1, respectively.     

Crystal chemistry of protonated 1,2-bis(di-R-aminomethyl)benzenes. Part V. [1,2-bis(diethylaminomethyl)-3,6-dichlorobenzene:1,2-bis(diethylaminomethyl)-3,4,6-trichlorobenzene]perchlorate mixed crystals

The mixed crystals of 1,2-bis(diethylaminomethyl)-3,6-di- and 3,4,6-trichloro-benzene perchlorate at 0.5:0.5 ratio have been studied using X-ray diffraction and FT-IR spectroscopy. The molecules of di- and tri-chloro derivatives are distributed randomly in the crystal lattice; however, this disorder manifested mainly by a partial occupation of the chlorine atom at C(4) and by relatively big atomic temperature parameters even at 99 K, particularly for the oxygens of the perchlorate anion. The proton in the [NHN]⁺ bond refined close to the equidistant position between the nitrogens. The conformations of the diethylaminomethyl substituents are pseudo-symmetrical relative to the plane and twofold axis passing through the midpoint of the hydrogen bond. The IR spectrum of the crystals shows a broad intense band and an intense continuous absorption indicating relatively high proton polarizability in the intramolecular hydrogen bond. In acetonitrile and in chloroform, the proton in the intramolecular hydrogen bond also shows a very high proton polarizability demonstrated by the continuous absorption in the IR spectrum.     

Proton transfer reactions from N-H acid [5,10,15,20-tetrakis(pentafluorophenyl)-21-H, 23-H-porphyrin] to strong bases in acetonitrile

Deprotonation of 5,10,15,20-tetrakis(pentafluorophenyl)-21-H, 23-H-porphyrin (PhF₅PorH₂) by various bases has been studied by ¹H NMR and kinetic methods. The kinetic parameters in acetonitrile were defined for proton transfer reactions yielding [NH]⁺ protonated bases and [NHN]⁻ anions with intramolecular hydrogen-bonded chains.     

The application of redox and induced reactions to the determination of thallium(III) in the presence of thallium(I)

Summary A new method of the determination of thallic ions [Tl(III)] in the presence of thallous [Tl(I)] ones, based on the oxidizing properties of Tl(III) towards cysteine was proposed. Cysteine was employed as an initiator in the iodineazide reaction and the oxidized part of the initiator was eliminated from the induced reaction medium by the respective redox reaction; the reaction products do not affect the above reaction. The contents of thallic ions (50–500 ng) in the sample can be determined from the progress in the induced reaction by measuring the unreacted iodine. The relative experimental error of the determination does not exceed 6%.     

Continuous dehydrochlorination of 1,3-dichloropropan-2-ol to epichlorohydrin: process parameters and by-products formation

The influence of pre-reactor and reactor temperatures on the conversion of 1,3-dichloropropan-2-ol and the selectivity of its transformation to epichlorohydrin in continuous dehydrochlorination for two modes of the reaction product collection was studied. The dehydrochlorination process and mechanism of diglycidyl ether formation are described.     

A separation between the boundary shape and the boundary functions in the parametric integral equation system for the 3D Stokes equation

Numerical Algorithms - The paper introduces the analytical modification of the classic boundary integral equation (BIE) for Stokes equation in 3D. The performed modification allows us to obtain...     

Thermographic imaging as alternative method in allergy diagnosis

Allergen sensitization is being diagnosed by commonly available methods in clinical practice—skin prick tests (SPTs) and specific immunoglobulin E test (sIgE). Recently, a new thermographic (TH) method for the assessment of SPT was developed, and it was demonstrated that the TH measurements of forearm temperature distribution during SPT, supported by a mathematical model, offer a new quantification method of allergen-induced skin reactions. The aim of this study is a comprehensive comparison of the TH method with SPT and sIgE techniques. The studies were performed for a group of 51 patients. The SPT and sIgE examinations were done in a routine way. For TH analyses, set of thermograms of both forearms were acquired after prick and analyzed with the use of developed software. All results were converted into categorized scale for comparison. The collected results indicate high correlation coefficients between methods equal to 0.76–0.99. Sensitivity and accuracy of TH assessment in respect of both SPT and sIgE methods is at good level (0.72–0.93). Acceptable level of specificity 0.60–0.88 was also achieved for most allergic responses. Excellent agreement between SPT and sIgE methods was observed which makes the TH assessment competitive. Due to higher precision and sensitivity of digital infrared technology, possibility of making error in diagnosis is significantly reduced. Additional advantage of the TH method relies on an estimation of the skin reactivity which allows highlighting the hypersensitivity patients and automatic correction of the diagnosis.     

Determination of microgram amounts of azide by gas chromatography

Azide ions (5–120 μg) are oxidized by cerium(IV) in an acidic medium. The nitrogen evolved is displaced by helium carrier and quantified by gas chromatography with a thermal conductivity detector. The relative standard deviation is <5%. Many sulphur anions, cyanide and some metal ions which form azide complexes do not interfere.     

Non-element method of solving 2D boundary problems defined on polygonal domains modeled by Navier equation

The paper presents a non-element method of solving boundary problems defined on polygonal domains modeled by corner points. To solve these problems a parametric integral equation system (PIES) is used. The system is characterized by a separation of the approximation of boundary geometry from the approximation of boundary functions. This feature makes it possible to effectively investigate the convergence of the obtained solutions with no need of performing the approximation of boundary geometry. The testing examples included confirm high accuracy of the solutions.