Long-Term Changes in a Heat Exchanger Steel

The steel ASTM A213 P22 is used for superheater outlet header in power plants. During duty cycles lasting over tens of years the temperature is of the order of 545°C and the pressure 125 atm. The microscopic changes in these steels are hard to analyze under working conditions, but they are believed to be responsible for the appearance of creeps in such devices. Investigation of the microscopic modifications will help to predict future failures due to creeps, increasing the reliability and saving a lot of money.We report the investigation of such changes in ASTM A213 P22 steel in use for 30 years as a Superheater header at Haifa power station. The analysis has been carried out using Mössbauer Spectroscopy, X-ray diffraction and optical microscopy. As a result it seems that the morphology and phase change of the carbide phases M₃C/M₇C₃ and M₂₃C₆ are the most prominent changes leading to the material failures.     

Ketene dithioacetal derivatives of 1-phenyl-3,5-dioxopyrazolidine. Synthesis and NMR characterization

1-Phenyl-3,5-dioxopyrazolidine 1 reacts with carbon disufide and alkyl halides in presence of excess of sodium acetate in dimethylformamide to afford the ketene dithioacetals 3a-h . The ¹³C chemical shift assignments of these compounds were made on the basis of two-dimensional nmr studies performed on the N-methylketene dithioacetal derivative 4.     

The stereocontrolled synthesis of orthogonally protected (R)-α-methyltryptophan

An expedient and highly stereocontrolled route to (R)-α-methyltryptophan and its orthogonally protected analogs has been developed via a four-step conversion from L-alanine in good overall yields. The stereochemistry of the products is confirmed by X-ray diffraction analysis, NMR spectroscopy and optical rotations.     

New aspects of the electroadsorption of ethyl xanthate on copper electrodes

The interaction of the ethyl xanthate (EX) anion with a copper electrode in a borate buffer solution, pH 9.2, has been investigated by cyclic voltammetry (CV), electrochemical quartz crystal microbalance (EQCM), electrochemical impedance spectroscopy (EIS), and measurements of contact angle (CA) under controlled potential. The results obtained allow establishing that, in the potential range from -0.80 and -0.60 V, two parallel reactions were characterized. These reactions were the ethyl xanthate electroadsorption and the hydrogen evolution reaction (HER). This last reaction has not been described by previous authors. Besides, the EIS measurements show that the mechanism of the HER on copper electrodes is not affected by the presence of a ethyl xanthate species. The EQCM study shows that in the electrodesorption process the departure of each ethyl xanthate species from the copper electrode is accompanied with the simultaneous entry of four to five water molecules. This fact is in accordance with the number of copper atoms involved in the adsorption of one ethyl xanthate species.     

Rapid determination of tannins in tanning baths by adaptation of BSA method

A rapid and reproducible method for the determination of tannins in vegetable tanning baths is proposed as a modification of the BSA method for grain tannins existing in literature. The protein BSA was used instead of leather powder employed in the Filter Method, which is adopted in Italy and various others countries of Central Europe. In this rapid method the tannin contents is determined by means a spectrophotometric reading and not by means a gravimetric analysis of the Filter Method. The BSA method, which belongs to mixed methods (which use both precipitation and complexation of tannins), consists of selective precipitation of tannin from a solution containing also non tannins by BSA, the dissolution of precipitate and the quantification of free tannin amount by its complexation with Fe(III) in hydrochloric solutions. The absorbance values, read at 522 nm, have been expressed in terms of tannic acid concentration by using a calibration curve made with standard solutions of tannic acid; these have been correlated with the results obtained by using the Filter Method.     

Oxidation of Cyclohexane by Molecular Oxygen Photoassisted by meso-Tetraarylporphyrin Iron(III)-Hydroxo Complexes

The photochemical and photocatalytic properties of iron meso-tetraarylporphyrins bearing an OH(-) axial ligand and different substituents in the beta-positions of the porphyrin ring are reported. Irradiation (lambda = 365 nm) in the absence of dioxygen leads to the reduction of Fe(III) to Fe(II) with the formation of OH(*) radicals. Substituents at the pyrrole beta-positions are found to markedly affect the photoreduction quantum yields. Under aerobic conditions, this photoreaction can induce the subsequent oxidation of cyclohexane to cyclohexanone and cyclohexanol by O(2) itself. The process occurs under mild conditions (22 degrees C; 760 Torr of O(2)) and without the consumption of a reducing agent. The polarity of the solvent and the nature of the porphyrin ring have a remarkable effect on the selectivity of the photooxidation process, likely controlling the cleavage of O-O bonds of possible iron peroxoalkyl intermediates. In particular, in pure cyclohexane, oxidation occurs with the selective formation of cyclohexanone; in contrast, in dichloromethane/cyclohexane mixed solvent, the main oxidation product is cyclohexanol. Phenyl-tert-butylnitrone (pbn) has been found to quench the radical chain autooxidation of the substrate thus increasing the yield of cyclohexanol. This becomes the only oxidation product when iron 5,10,15,20-tetrakis(2,6-dichlorophenyl)porphyrin hydroxide (Fe(III)(TDCPP)(OH)) is used as photocatalyst.     

Molecular mechanics and dynamics of biomolecules using a solvent continuum model

An easy implementation of molecular mechanics and molecular dynamics simulation using a continuum solvent model is presented that is particularly suitable for biomolecular simulations. The computation of solvation forces is made using the linear Poisson-Boltzmann equation (polar contribution) and the solvent-accessible surface area approach (nonpolar contribution). The feasibility of the methodology is demonstrated on a small protein and a small DNA hairpin. Although the parameters employed in this model must be refined to gain reliability, the performance of the method, with a standard choice of parameters, is comparable with results obtained by explicit water simulations. Copyright 2001 John Wiley & Sons, Inc. J Comput Chem 22: 1830-1842, 2001