Fluorescein Based Three-channel Probe for the Selective and Sensitive Detection of CO32− Ions in an Aqueous Environment and Real Water Samples

Journal of Fluorescence - We have constructed a novel fluorescein-based fluorescent chemosensor, FL-In, functionalised with an indole moiety and capable of sensing by both the optical...     

A facile gamma-ray method for radiodegradation of bilirubin in chloroform

Kinetics and concentration profile associated with the regulated radiodegradation of bilirubin in an organic solvent were assessed. The pure unconjugated specimen was prepared in chloroform (40.0 μM). The depletion of bilirubin was almost linear with dose, and complete degradation was accomplished with doses in excess of 100 Gy. The method was also evaluated for the explicit production of the long-wavelength isomer of biliverdin, which was characterized spectrometrically by an absorbance band in the region 600–650 nm. Results including differences in air, N₂ and O₂ purged samples are presented to identify the atmospheric medium for optimum production of biliverdin. The process was regulated by controlling the dose. The general rate constant of the depletion process was estimated at a dose rate of 5.67·10⁻²Gy·s⁻¹. The method is a convenient substitute for light illumination studies of bilirubin. This revised version was published online in July 2006 with corrections to the Cover Date.     

Novel dye-attached macroporous films for cadmium, zinc and lead sorption: Alkali Blue 6B-attached macroporous poly(2-hydroxyethyl methacrylate)

Alkali Blue 6B-attached poly(2-hydroxyethyl methacrylate) (poly(HEMA)) microporous films were investigated as chelate forming sorbents for heavy metal removal. Poly(HEMA) microporous films were prepared by UV-initiated photo-polymerization of HEMA in the presence of an initiator (azobisisobutyronitrile (AIBN)). Alkali Blue 6B was attached covalently. These films with a swelling ratio of 58%, and carrying 14.8 mmol Alkali Blue 6B m(-2) which were then used in the removal of Cd(II), Zn(II) and Pb(II) from aqueous media. Adsorption rates were very high, equilibrium was achieved in about 30 min. The maximum adsorption of heavy metal ions onto the Alkali Blue 6B-attached films were 41.4 mmol m(-2) for Cd(II), 52.4 mmol m(-2) for Zn(II), and 64.5 mmol m(-2) for Pb(II). When the heavy metal ions competed during the adsorption from a mixture the adsorption values for Cd(II), Zn(II) and Pb(II) were quite close. Heavy metal ions were desorbed by using 0.1 M HNO(3). A significant amount of the adsorbed heavy metal ions (up to 95%) could be desorbed in 30 min. Repeated adsorption/desorption cycles showed the feasibility of these novel dye-attached microporous films for heavy metal removal.     

Selective adsorption, pre-concentration and matrix elimination for the determination of Pb(II), Cd(II), Hg(II) and Cr(III) using 1,5,9,13-tetrathiacyclohexadecane-3,11-diol anchored poly (p-chloromethylstyrene-ethyleneglycoldimethacrylate) microbeads

Poly(p-chloromethylstyrene-ethyleneglycoldimethacrylate) polymeric microbeads, poly(p-CMS-EGDMA), were synthesized and 1,5,9,13-tetrathiacyclohexadecane-3,11-diol (S4HD) was attached chemically onto the polymeric microbeads. Characterization of all microbeads was done by Fourier transform-infrared spectrometry (FT-IR) and elemental analyzer. The amount of attached 1,5,9,13-tetrathiacyclohexadecane-3,11-diol to the polymer was found to be 2.23 mmol g⁻¹ polymers. The ligand attached microbeads, poly(p-CMS-EGDMA-S4HD), were used to examine the adsorption capacity of Pb(II), Cd(II), Hg(II) and Cr(II) ions for recovery, pre-concentration and the matrix elimination by changing the pH and the initial metal ion concentrations and also adsorption kinetics of the studied metal ions was determined. Pre-concentration factors for the studied toxic metal ions were found to be more than 500-fold and recovery was between 92 and 106%. In the drinking, lake, tap and sea-water samples from water lands, ultra-trace toxic metal ion concentrations were determined easily by using ligand modified microbeads after pre-concentration because of the high pre-concentration factor and easily matrix elimination using ligand modified microbeads. Reference sea-water material was used for the validation of the method and it was found that recovery, pre-concentration and the matrix elimination were performed perfectly. For the desorption of the toxic metal ions, 3 M HCl containing 0.8 M thiourea was used and desorption ratio was obtained more than 96%.     

Pyrimidines,Part XXXI . Synthesis,reactions and properties of 6-acyl-1,3-dimethylpyrrolo[2,3-d]pyrimidine-2,4-diones

Acylations of 1,3-dimethyl- ( 1 ) and 1,3,7-trimethylpyrrolo[2,3-d]pyrimidine-2,4-dione ( 2 ) with anhydrides in the presence of trifluoroacetic acid proceed well to give in good yields the corresponding 7-acyl derivatives 3–11 . The 6-trichloroacetyl derivatives 5 and 6 are sensitive towards nucleophiles, which displace the trichloromethyl group easily by formation of the corresponding 6-carboxylic acid derivatives 12–23. The newly synthesized compounds have been characterized by elemental analysis, uv and ¹H nmr spectra and pK_a, determinations.     

Wafer and epilayer improvement for integrated optics devices on InP: the ESPRIT project 2518

Ga _x In_1–x As _y P_1–y alloys lattice matched to InP substrates are currently used to fabricate optoelectronic and integrated optics devices. To achieve devices with high performances and high fabrication yield, the uniformity and reproducibility of the Ga _x In_1–x As _y P_1–y epitaxial layers (composition, thickness, doping, etc.) have become key parameters. These problems have been addressed in the frame of ESPRIT project 2518 and are presented in this paper. Several aspects have been considered starting from the optimization of InP substrates, the MOVPE growth of uniform GalnAsP layers, the material characterization to the validation of material uniformity on passive optical waveguides. Both scanning photoluminescence analysis and waveguide losses measurements performed on 2 inch wafers with a high lateral resolution have shown that high quality uniform GalnAsP layers can be obtained reproducibly on 2 InP substrates using a commercially available LP-MOCVD growth process. In particular, more than 60% of 36 mm long, 3m wide and 100m spaced rib waveguides exhibit losses below 0.8dBcm^–1.     

Synthesis, structural characterization and electrochemical studies of new macrocyclic Schiff base containing pyridine head and its metal complexes

A new macrocyclic ligand, 1,3,5-triaza-2,4:7,8:13,14-tribenzo-9,12-dioksa-cyclopentadeca-1,5-diene was synthesized by reaction of 2,6-diaminopyridine and 1,2-bis(2-carboxyaldehyde phenoxy)ethane. Then, its Cu(II), Ni(II), Pb(II), Co(III) and La(III) complexes were synthesized by the template effect by the reaction of 2,6-diaminopyridine and 1,2-bis(2-carboxyaldehyde phenoxy)ethane and Cu(NO₃)₂ · 3H₂O, Ni(NO₃)₂ · 6H₂O, Pb(NO₃)₂, Co(NO₃)₂ · 6H₂O, La(NO₃)₃ · 6H₂O, respectively. The ligand and its metal complexes have been characterized by elemental analysis, IR, ¹H and ¹³C NMR, UV-Vis spectra, magnetic susceptibility, thermal gravimetric analysis, conductivity measurements, mass spectra, and cyclic voltammetry. All complexes are diamagnetic and Cu(II) complex is binuclear. The Co(II) was oxidized to Co(III). The comparative electrochemical studies show that the nickel complex exhibited a quasi-reversible one-electron reduction process, while copper and cobalt complexes gave irreversible reduction processes in DMSO solution.     

Thermal computations of temperature distribution and bulb heat transfer in an automobile headlamp

In this study, experimental and numerical analysis was performed to define thermal deformation inside the head lamp because of usage plastic materials and thermal loads. Buoyancy, radiation and conjugate effects were considered. Velocity and temperature distributions were obtained and possible hot points and condense regions can be determined. Nusselt number distribution on cylindrical bulb were computed and compared with literature. Relatively important heat transfer increase in natural convection was found.     

Synthesis, thermal stability, electronic features, and antimicrobial activity of phenolic azo dyes and their Ni(II) and Cu(II) complexes

Four water soluble azo dyes, 4-(isopropyl)-2-[(E)-(4-chlorophenyl)diazenyl]phenol (L ¹), 4-(isopropyl)-2-[(E)-(2,4-dichlorophenyl)diazenyl]phenol (L²), 4-(sec-butyl)-2-[(E)-(4-chlorophenyl) diazenyl]phenol (L ³), 4-(sec-butyl)-2-[(E)-(2,4-dichlorophenyl)diazenyl]phenol (L ⁴), and their Cu(II) and Ni(II) complexes were synthesized and characterized using spectroscopic methods. Examination of their thermal stability revealed similar decomposition temperature of approximately 260–300°C and that they were more thermally stable than their metal complexes. Ni(II) complexes of ligands L² and L⁴ were more stable than the other coordination compounds. Among the synthesized ligands, L² and the complexes Cu(L³)₂ and Ni(L⁴)₂ showed both antimicrobial and antifungal activity. However, the other ligands and the complexes were poorly active against selected microorganisms.     

Defect Chemistry of Singly and Doubly Doped Ceria: Correlation between Ion Transport and Energetics

Earlier studies have shown a strong correlation between the enthalpy of formation, ΔH_f,ox, and the ionic conductivity, σ_i, near room temperature in doped ceria systems, which are promising solid electrolytes for intermediate‐temperature solid oxide fuel cells (IT‐SOFCs). The present work demonstrates that this correlation holds at the operating temperature of IT‐SOFCs, 600–700 °C. Solid solutions of Ce_1?xNd_xO_2?0.5x, Ce_1?xSm_xO_2?0.5x, and Ce_1?xSm_0.5xNd_0.5xO_2?0.5x are studied. The ΔH_f,ox at 702 °C is determined by considering the excess heat content between 25 and 702 °C combined with the value of ΔH_f,ox at 25 °C. Both σ_i and ΔH_f,ox show maxima at x=0.15 and 0.20 for the singly and doubly doped ceria, respectively, suggesting that the number of mobile oxygen vacancies in these solid solutions reaches a maximum near those compositions. An increase in temperature results in a shift of the maximum in both ΔH_f,ox and σ_i towards higher concentrations. This shift results from a gradual increase in dissociation of the defect associates.