On‐line 2D‐LC‐ESI/MS/MS determination of rifaximin in rat serum

A highly sensitive and selective on‐line two‐dimensional reversed‐phase liquid chromatography/electrospray ionization–tandem mass spectrometry (2D‐LC‐ESI/MS/MS) method was developed and validated to determine rifaximin in rat serum by direct injection. The 2D‐LC‐ESI/MS/MS system consisted of a restricted access media column for trapping proteins as the first dimension and a Waters C₁₈ column as second dimension using 0.1% aqueous acetic acid:acetonitrile as mobile phase in a gradient elution mode. Rifampacin was used as an internal standard. The linear dynamic range was 0.5–10 ng/mL (r² > 0.998). Acceptable precision and accuracy were obtained over the calibration range. The assay was successfully used in analysis of rat serum to support pharmacokinetic studies. Copyright © 2009 John Wiley & Sons, Ltd.     

Evaluation of Genetic Homogeneity in Tissue Culture Regenerates of Jatropha curcas L. using Flow Cytometer and DNA-based Molecular Markers

The present investigation aimed to evaluate the reliability of in vitro propagation methods for elite genotypes of Jatropha curcas L., that maintain genetic integrity of tissue culture (TC) regenerates among two regeneration systems developed through direct shoot bud regeneration using nodal/apical shoot segments (protocol-A) and in vitro-derived leaves (protocol-B) as explants. Random amplified polymorphic DNA (RAPD), intersimple sequence repeat (ISSR), simple sequence repeat (SSR) molecular markers, and flow cytometery (FCM) were employed to evaluate genetic homogeneity in TC-regenerates at different passages of subcultures. RAPD markers showed genetic homogeneity in fifth-generation TC-regenerates of both protocols. ISSR markers showed genetic stability of leaf regenerates (protocol-B) at 10th generation. FCM analysis of TC-regenerates at 10th generation in protocol-B and at 20th generation in both protocols, showed stability of ploidy level. SSR assessment of TC-regenerates at 20th generation in both protocols confirmed genetic homogeneity. The results confirmed the genetic stability of the TC-regenerates and demonstrated the reliability of the regeneration systems developed so far using explants of two different origins, for large-scale multiplication of elite genotypes of Jatropha.     

Rapid determination of rifaximin on dried blood spots by LC‐ESI‐MS

The use of blood spot collection cards is a simple way to obtain specimens for therapeutic drug monitoring, assessing adherence to medications and preventing toxicity in a clinical setting. A high‐throughput liquid chromatography–electrospray ionization mass spectrometric (LC‐ESI‐MS) method for determination of rifaximin on dried blood spots (DBS) was developed and validated. It involves solvent extraction of a punch of DBS followed by reversed‐phase LC on a monolithic column consisting of a silica rod with bimodal pore structure and detection by ESI‐MS. Rifampicin was used as an internal standard (IS). The run time was within 5.0 min with a very low back‐pressure at a flow rate of 0.5 mL/min. The assay was linear from 0.1 to 10 ng/mL. The mean recovery was 98.42%. The developed method is very simple, rapid and useful for clinical applications. Copyright © 2011 John Wiley & Sons, Ltd.     

Assessment of Genetic Stability and Instability of Tissue Culture-Propagated Plantlets of Aloe vera L. by RAPD and ISSR Markers

Efficient plantlet regeneration with and without intermediate callus phase was achieved for a selected genotype of Aloe vera L. which is sweet in test and used as a vegetable and source of food. Random amplified polymorphic DNA (RAPD) and inter simple sequence repeats (ISSR) marker assays were employed to evaluate genetic stability of plantlets and validate the most reliable method for true-to-type propagation of sweet aloe, among two regeneration systems developed so far. Despite phenotypic similarities in plantlets produced through both regeneration systems, the differences in genomic constituents of plantlets produced through intermediate callus phase using soft base of inflorescence have been effectively distinguished by RAPD and ISSR markers. No polymorphism was observed in regenerants produced following direct regeneration of axillary buds, whereas 80% and 73.3% of polymorphism were observed in RAPD and ISSR, respectively, in the regenerants produced indirectly from base of the inflorescence axis via an intermediate callus phase. Overall, 86.6% of variations were observed in the plantlets produced via an intermediate callus phase. The occurrence of genetic polymorphism is associated with choice of explants and method used for plantlet regeneration. This confirms that clonal propagation of sweet aloe using axillary shoot buds can be used for commercial exploitation of the selected genotype where a high degree of fidelity is an essential prerequisite. On the other hand, a high degree of variations were observed in plantlets obtained through indirect regeneration and thus cannot be used for the mass multiplication of the genotype; however, it can be used for crop improvement through induction of somaclonal variations and genetic manipulations.     

Termination of Surface Radicals and Kinetic Analysis of Surface‐Initiated RAFT Polymerization on Flat Surfaces

si‐RAFT polymerization is widely used for surface modification. However, how the surface radicals terminate requires further elucidation. A kinetic model is developed for si‐RAFT via the R group approach. The model describes the molecular weight of grafted polymers as well as polymer layer thickness and various chain concentrations. It is shown that surface/surface radical termination plays an important role. The termination is facilitated by the migration of surface radicals through “hopping” and “rolling” mechanisms. “Hopping” occurs through activation/deactivation cycles between surface and solution chains, dependent on the RAFT concentration in solution. “Rolling” occurs through transfers between surface/surface chains, dependent on the grafting density at surface.

     

Determination of rifaximin in rat serum by ionic liquid based dispersive liquid-liquid microextraction combined with RP-HPLC

An efficient and environmental friendly ionic liquid based dispersive liquid-liquid microextraction procedure was optimized for determination of rifaximin in rat serum by reverse phase high-performance liquid chromatography. The effect of ionic liquids, dispersive solvents, extractant/disperser ratio, and salt concentrations on sample recovery and enrichment factors were studied. Among the five ionic liquids studied in the present investigation, 1-butyl-3-methylimidazolium hexafluorophosphate was found to be most effective for extraction of rifaximin. The recovery was found to be more than 98% using 1-butyl-3-methylimidazolium hexafluorophosphate and methanol as extraction and dispersive solvents, at an extractant/disperser ratio of 0.43. The recovery was further enhanced to 99.5% by the addition of 5.0% NaCl solution. A threefold enhancement in detection limit was achieved when compared to protein precipitation. The ionic liquid containing the extracted rifaximin was directly injected into HPLC system. The linear relationship was observed in the range of 0.03-10.0 μg/mL with the correlation coefficient (r(2) ) 0.9998. Limits of detection and quantification were found to be 0.01 and 0.03 μg/mL, respectively. The relative standard deviation was 2.5%. The method was validated and applied to study pharmacokinetics of rifaxmin in rat serum.     

Factors Affecting Grafting Density in Surface‐Initiated ATRP: A Simulation Study

In surface‐initiated atom transfer radical polymerization, knowledge of grafting density is of significant interest because it is one of the determining properties of grafted polymer. It is well known that not all of the immobilized initiators can grow into polymer chains. However, little is known about why this happens and what affects the grafting efficiency. The lack of information is partly due to the difficulty in experimental determination of grafting density on flat substrates. To circumvent the problem, Monte Carlo simulation with bond fluctuation model is used in this study to investigate the effects of various reaction conditions on the grafting density. The simulation results show lower grafting density when less deactivator is present. In systems with lower deactivator concentration, the number of monomer added per activation cycle is higher. Coupling this with close proximity of immobilized initiators results in chains initiated at earlier time to shield their neighboring initiator moieties from adding mono­mers, thus lowering the grafting density in such a system. These simulation results also provide an explanation to the seemingly conflicting trend reported in the literatures.

     

LC-ESI-MS/MS determination of paclitaxel on dried blood spots

A simple and rapid high‐performance liquid chromatography–tandem mass spectrometric assay for determination of paclitaxel on rat dried blood spots was developed and validated. The extracted sample was chromatographed without further treatment using a reverse‐phase Oyster ODS3, 4.6 × 50 mm, 3 µm column with mass spectrometry detection. The mobile phase comprised of acetonitrile–water, 60:40 v/v, with a flow rate of 0.4 mL/min was used. The calibration was linear over the range 0.2–20 ng/mL. The limits of detection and quantification were 0.08 and 0.2 ng/mL, respectively. The intra‐ and inter‐day precision (CV%) and accuracy (relative error %) were less than 10 and 12%, respectively. Copyright © 2011 John Wiley & Sons, Ltd.     

Reversed-phase liquid chromatographic separation of antiretroviral drugs on a monolithic column using ionic liquids as mobile phase additives

The use of 3-methylimidazolium cation-based ionic liquids (ILs) was evaluated as mobile phase additives for separation of antiretroviral drugs on a monolithic column by RP-HPLC. Separation of eight commonly used antiretroviral drugs was achieved on a Chromolith Flash, RP-18e column (25 × 4.6 mm, porous material) using water (pH 4.0 adjusted with acetic acid)/methanol v/v as a mobile phase containing ILs in a gradient elution mode. The effects of concentrations of ILs on retention, resolution and peak shape were studied and a regression equation correlating the interactions between stationary phase and the ILs was established. The retention of all the drugs was decreased notably by using 1-butyl-3-methylimidazolium tetrafluoroborate, while 1-ethyl-3-methylimidazolium methylsulfate reduced gradient drift drastically when compared to triethylamine.     

Modeling molecular weight distribution and effect of termination in controlled radical polymerization: A novel and transformative approach

A theory for polymer molecular weight distribution (MWD) in atom transfer radical polymerization (ATRP) has been derived by using analogy to a series of continuous stirred tank reactors (CSTRs). This approach relates one activation cycle in ATRP to one reactor in CSTRs. The derived MWD expression includes effect of radical termination and allows detailed investigation on the factors that determine the polymer distribution, namely the level of “control” and “livingness.” The level of control means the average number of activation cycles experienced by individual chains. The degree of livingness is quantified by the fraction of terminated chains. It was found that the effect of livingness and control on MWD is complex. Large number of activation cycles does not guarantee a narrow distribution. There exists an optimum value of activation cycles to achieve the lowest polydispersity by balancing the control (achieved by increasing activation cycles) with the loss of livingness (also caused by increasing activation cycles). The distribution for ATRP is in‐between Poisson and Flory distributions, determined by the level of control and livingness. In general, having high degree of livingness and maintaining control are both necessary conditions to obtain narrow MWD. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 639–651