Design and development of a two‐dimensional system based on hydrophilic and reversed‐phase liquid chromatography with on‐line sample treatment for the simultaneous separation of excreted xenobiotics and endogenous metabolites in urine

In the present work we describe a two‐dimensional liquid chromatographic system (2D‐LC) with detection by mass spectrometry (MS) for the simultaneous separation of endogenous metabolites of clinical interest and excreted xenobiotics deriving from exposure to toxic compounds. The 2D‐LC system involves two orthogonal chromatographic modes, hydrophilic interaction liquid chromatography (HILIC) to separate polar endogenous metabolites and reversed‐phase (RP) chromatography to separate excreted xenobiotics of low and intermediate polarity. Additionally, the present proposal has the novelty of incorporating an on‐line sample treatment based on the use of restricted access materials (RAMs), which permits the direct injection of urine samples into the system. The work is focused on the instrumental coupling, studying all possible options and attempting to circumvent the problems of solvent incompatibility between the RAM device and the two chromatographic columns, HILIC and RP. The instrumental configuration developed, RAM‐HILIC‐RPLC‐MS/MS, allows the simultaneous assessment of urinary metabolites of clinical interest and excreted compounds derived from exposure to toxic agents with minimal sample manipulation. Thus, it may be of interest in areas such as occupational and environmental toxicology in order to explore the possible relationship between the two types of compounds. Copyright © 2015 John Wiley & Sons, Ltd.     

Synthesis,Electronic Properties and WOLED Devices of Planar Phosphorus‐Containing Polycyclic Aromatic Hydrocarbons

We describe the synthesis and the physical properties of polyaromatic hydrocarbons (PAHs) containing a phosphorus atom at the edge. In particular, the impact of the successive addition of aromatic rings on the electronic properties was investigated by experimental (UV/Vis absorption, fluorescence, cyclic voltammetry) and theoretical studies (DFT). The physical properties recorded in solution and in the solid state showed that the P‐containing PAHs exhibit properties expected for an emitter in white organic light‐emitting diodes (WOLEDs).     

Non-Trivial t-Intersection in the Function Lattice

The function lattice, or generalized Boolean algebra, is the set of ℓ-tuples with the ith coordinate an integer between 0 and a bound n_i. Two ℓ-tuples t-intersect if they have at least t common nonzero coordinates. We prove a Hilton–Milner type theorem for systems of t-intersecting ℓ-tuples.Received September 29, 2004     

Optical Spectroscopy and Theoretical Studies in Calixarene Chemistry

This review summarizes different applications of optical spectroscopic methods in calixarene chemistry including UV/Vis spectrometry, vibrational spectroscopic techniques (FTIR and Raman spectroscopy), luminescence spectroscopy (including fluorescence and phosphorescence), ellipsometry and various optical microscopic methods. Moreover, the results of theoretical studies (AM1, PM3, DFT, ab initio, etc.) are summarized based on selected papers in the field of conformational studies, thermodynamics and complexation features. About 300 references are processed systematically from the results reported mainly in the recent years with emphasis on the potential of practical application of these molecules.     

Sample preparation procedure for the determination of sulphur and trace metals in oil products by the ICP with a minitorch using emulsions

A quick sample preparation method was used for the determination of sulphur and trace metals in oil and oily products by the ICP with a minitorch. Stable aqueous emulsions of oils and oil products were made by using two kinds of emulsifiers (one with low sulphur content, the other sulfonated). Aqueous standard solutions can be used for the preparation of calibration solutions. The contents of S, Al, Cr, Cu, Fe, Mg, Ni and Pb in aqueous emulsions were determined and the results were in good agreement with the composition of oil standard solutions used for control analysis procedure.     

On well-ordered mono-unary algebras

Given a linearly ordered set (A, _R ) and an R-monotone function f: AA, we give a necessary and sufficient condition on A, f, _R , involving generating sets and forbidden subalgebras, for _R to be a well-ordering.Partially supported by Hungarian National Foundation for Scientific Research Grant nr. 1813.     

19F NMR study of the equilibria and dynamics of the Al3+/F- system

A careful reinvestigation by high-field 19F NMR (470 MHz) spectroscopy has been made of the Al3+/F- system in aqueous solution under carefully controlled conditions of pH, concentration, ionic strength (I), and temperature. The 19F NMR spectra show five distinct signals at 278 K and I = 0.6 M (TMACl) which have been attributed to the complexes AlFi(3-i)+(aq) with i < or = 5. There was no need to invoke AlFi(OH)j(3-i-j)+ mixed complexes in the model under our experimental conditions (pH < or = 6.5), nor was any evidence obtained for the formation of AlF6(3-)(aq) at very high ratios of F-/Al3+. The stepwise equilibrium constants obtained for the complexes by integration of the 19F signals are in good agreement with literature data given the differences in medium and temperature. In I = 0.6 M TMACl at 278 K and in I = 3 M KCl at 298 K the log Ki values are 6.42, 5.41, 3.99, 2.50, and 0.84 (for species i = 1-5) and 6.35, 5.25, and 4.11 (for species i = 1-3), respectively. Disappearance of the 19F NMR signals under certain conditions was shown to be due to precipitation. Certain 19F NMR signals exhibit temperature- and concentration-dependent exchange broadening. Detailed line shape analysis of the spectra and magnetization transfer measurements indicate that the kinetics are dominated by F- exchange rather than complex formation. The detected reactions and their rate constants are AlF2(2+) + *F- reversible AlF*F2+ + F- (k02 = (1.8 +/- 0.3) x 10(6) M-1 s-1), AlF3(0) + *F- reversible AlF2*F0 + F- (k03 = (3.9 +/- 0.9) x 10(6) M-1 s-1), and AlF3(0) + H*F reversible AlF2*F0 + HF (kH03 = (6.6 +/- 0.5) x 10(4) M-1 s-1). The rates of these exchange reactions increase markedly with increasing F- substitution. Thus, the reactions of AlF2+(aq) were too inert to be detected even on the T1 NMR time scale, while some of the reactions of AlF3(0)(aq) were fast, causing large line broadening. The ligand exchange appears to follow an associative interchange mechanism. The cis-trans isomerization of AlF2+(aq), consistent with octahedral geometry for that complex, is slowed sufficiently to be observed at temperatures around 270 K. Difference between the Al3+/F- system and the much studied Al3+/OH- system are briefly commented on.     

Chemical thermodynamics

The curing of composition containing epoxy bond is complicated chemical and technological process where under temperature and pressure conditions a change of its structure occurs. The structure changes are possible to know by thermal methods as DSC, DTA, etc. and also by measurement of dielectrical response under the low frequency electrical field.