Dielectrophoretic force on a sphere near a planar boundary

The small gap distance separating a spherical colloidal particle in electrophoretic motion from a planar nonconducting surface is a required parameter for calculating its electrophoretic mobility. In the presence of an externally applied electric field, this gap distance is determined by balancing the van der Waals, electrical double layer interaction, and gravitational forces with a dielectrophoretic (DEP) force. Here, the DEP force was determined analytically by integration of the Maxwell stress over the surface of the particle. The account of this force showed that its previous omission from the analysis always resulted in underpredicted gap distances. Furthermore, the DEP force dominated under conditions of low particle density or high electric field strength and led to much higher gap distances on the order of a few microns. In one particular case, a combination of low particle density and small particle size produced two possible equilibrium gap distances for the particle. However, the particle was unstable in the second equilibrium position when subjected to small perturbations. In general, larger particles had smaller gap sizes. The effects of four other parameters on gap distance were studied, and gap distances were found to increase with lower particle density, higher electric field strength, higher particle and wall zeta potentials, and lower Hamaker constants. Retardation effects on van der Waals attraction were considered.     

Excited-state electron-transfer quenching by a series of water photoreduction mediators

Rate constants k_q for the quenching of the excited state of Ru(bipy)₃²⁺ by a series of viologen salts having different redox potential E_{$\text{1}\text{2}$} have been determined in deaerated aqueous solutions at pH = 5 by laser flash photolysis. The k_q values are found to decrease with increasing —E_{$\text{1}\text{2}$} and to correlate with the reaction free-energy change ΔG. Such a correlation is shown to be consistent with the Rehm—Weller model for electron-transfer reactions.     

Hydrogen activation on Mo-based sulfide catalysts,a periodic DFT study

Hydrogen adsorption on Mo[bond]S, Co[bond]Mo[bond]S, and Ni[bond]Mo[bond]S (10 1 macro 0) surfaces has been modeled by means of periodic DFT calculations taking into account the gaseous surrounding of these catalysts in working conditions. On the stable Mo[bond]S surface, only six-fold coordinated Mo cations are present, whereas substitution by Co or Ni leads to the creation of stable coordinatively unsaturated sites. On the stable MoS(2) surface, hydrogen dissociation is always endothermic and presents a high activation barrier. On Co[bond]Mo[bond]S surfaces, the ability to dissociate H(2) depends on the nature of the metal atom and the sulfur coordination environment. As an adsorption center, Co strongly favors molecular hydrogen activation as compared to the Mo atoms. Co also increases the ability of its sulfur atom ligands to bind hydrogen. Investigation of surface acidity using ammonia as a probe molecule confirms the crucial role of sulfur basicity on hydrogen activation on these surfaces. As a result, Co[bond]Mo[bond]S surfaces present Co[bond]S sites for which the dissociation of hydrogen is exothermic and weakly activated. On Ni[bond]Mo[bond]S surfaces, Ni[bond]S pairs are not stable and do not provide for an efficient way for hydrogen activation. These theoretical results are in good agreement with recent experimental studies of H(2)[bond]D(2) exchange reactions.     

Convexity preserving interpolation by algebraic curves and surfaces

The problem of interpolation by a convex curve to the vertices of a convex polygon is considered. A natural 1-parameter family ofC algebraic curves solving this problem is presented. This is extended to a solution, of a general Hermite-type problem, in, which the curve also interpolates to one or two prescribedtangents at any desired vertices of the polygon. The construction of these curves is a generalization of well known methods for generatingconic sections. Several properties of this family of algebraic curves are discussed. In addition, the method is generalized to convexC interpolation of strictly convex data sets inR ³ by algebraicsurfaces.     

FDA Quality assurance for radioactivity in foods and radiopharmaceuticals

Summary The Food and Drug Administration (FDA) has regulatory responsibility for radionuclides in foods and radiopharmaceuticals and must maintain an ongoing Quality Assurance Program. These Quality Control Programs involve the U.S. Environmental Protection Agency (EPA) [1, 2] and the National Institute of Standards and Technology (NIST) [3], who supply the necessary reference materials and standards to ensure that the measurements are accurate and reproduceable. Data from EPA (1987 to 1991) and from a NIST Blind Source study (1985 to 1991) show the results are accurate with an average variation from NIST values of 1.8% [4–10]. The use of standard materials with the same matrices as the samples being analyzed provides credibility to the measurements.     

Detailed analysis of α,ω-bis(4-hydroxybutyl) poly(dimethylsiloxane) using GPC-MALDI TOF mass spectrometry

In this study the prepolymer alpha,omega-bis(4-hydroxybutyl) poly(dimethylsiloxane), used in the formulation of oxygen permeable films, is evaluated by gel permeation chromatography (GPC) combined with matrix assisted laser desorption ionization (MALDI) time of flight (TOF) mass spectrometry (MS). Two unexpected mass distributions are observed in the mass spectra. Reaction schemes for the formation of these distributions are proposed. A solution phase trimethylsilane end group modification was performed on the prepolymer to determine whether the unexpected mass distributions occur as impurities from synthesis or as artifacts from the MS process. Evaluation of the TMS modified prepolymer indicates the unexpected mass distributions indeed occur as impurities from the synthetic procedure. Average molecular weight values are determined by traditional GPC, direct MALDI-TOF MS, and GPC-MALDI-TOF MS methods and the results are compared.     

Heavier alkali-metal monosulfides (KS, RbS, CsS, and FrS) and their cations

The heavier alkali-metal monosulfides (KS, RbS, CsS, and FrS) have been studied by high-level ab initio calculations. The RCCSD(T) method has been employed, combined with large flexible valence basis sets. All-electron basis sets are used for potassium and sulfur, with effective core potentials being used for the other metals, describing the core electrons. Potential-energy curves are calculated for the lowest two neutral and cationic states: all neutral monosulfide species have a (2)Pi ground state, in contrast with the alkali-metal monoxide species, which undergo a change in the electronic ground state from (2)Pi to (2)Sigma(+) as the group is descended. In the cases of KS, RbS, and CsS, spin-orbit curves are also calculated. We also calculate potential-energy curves for the lowest (3)Sigma(-) and (3)Pi states of the cations. From the potential-energy curves, spectroscopic constants are derived, and for KS the spectroscopic results are compared to experimental spectroscopic values. Ionization energies, dissociation energies, and heats of formation are also calculated; for KS, we explore the effects of relativity and basis set extrapolation on these values.     

Photoinduced processes within compact dyads based on triphenylpyridinium-functionalized bipyridyl complexes of ruthenium(II)

As an alternative to conventional charge-separation functional molecular models based on long-range ET within redox cascades, a "compact approach" has been examined. To this end, spacer elements usually inserted between main redox-active units within polyad systems have been removed, allowing extended rigidity but at the expense of enhanced intercomponent electronic communication. The molecular assemblies investigated here are of the P-(theta (1))-A type, where the theta (1) twist angle is related to the degree of conjugation between the photosensitizer (P, of {Ru(bpy)(3)}(2+) type) and the electron-acceptor (A). 4-N- and 4-N-,4'-N-(2,4,6-triphenylpyridinio)-2,2'-bipyridine ligands (A(1)-bpy and A(2)-bpy, respectively) have been synthesized to give complexes with Ru(II), 1-bpy and 2-bpy, respectively. Combined solid-state analysis (X-ray crystallography), solution studies ((1)H NMR, cyclic voltammetry) and computational structural optimization allowed verifying that theta (1) angle approaches 90 degrees within 1-bpy and 2-bpy in solution. Also, anticipated existence of strong intercomponent electronic coupling has been confirmed by investigating electronic absorption properties and electrochemical behavior of the compounds. The capability of 1-bpy and 2-bpy to undergo PET process was evaluated by carrying out their photophysical study (steady state emission and time-resolved spectroscopy at both 293 and 77 K). The conformational dependence of photoinduced processes within P-(theta (1))-A systems has been established by comparing the photophysical properties of 1-bpy (and 2-bpy) with those of an affiliated species reported in the literature, 1-phen. A complementary theoretical analysis (DFT) of the change of spin density distribution within model [1-bpy(theta (1))](-) mono-reduced species as a function of theta (1) has been undertaken and the possibility of conformationally switching emission properties of P was derived.     

Topography of Nucleic Acid Helices in Solutions

A number of reporter molecules of the structure R-(CH₂)_n-N⁺(CH₃)₂(CH₂)_mN⁺(CH₃)₃·2Br^?, where R is a chromophore absorbing in the 300–500 mp region, have been synthesized. The effect of DNA and RNA on the absorption, induced circular dichroism, and proton magnetic resonance spectra is reported. A red shift and a hypochromic effect on the absorption spectra of the bound chromophore is observed. In all cases where R is an “unsymmetrical” 4-nitroaniline chromophore, it is found that DNA and RNA induce an opposite CD in the absorption band of the bound reporter molecules. These results together with PMR studies are interpreted in terms of the structure of the nucleic acid systems in solutions.     

Cooperative Dehydrogenation of N‐Heterocycles Using a Carbon Nanotube–Rhodium Nanohybrid

Rhodium nanoparticles were anchored on carbon nanotubes and the resulting nanohybrid was studied as co‐catalyst, along with tert‐butylcatechol, for the dehydrogenation of various N‐heterocycles. The co‐catalytic system operates in high yields, under the mildest conditions reported so far, and can be applied to a wide variety of secondary amine‐containing scaffolds.