Response of portable gamma monitors for dose rate measurements under various radiation conditions

Journal of Radioanalytical and Nuclear Chemistry - Responses of the hand-held gamma monitors available for the ambient dose equivalent rate measurements in the Federation of Bosnia and Herzegovina...     

Highly efficient redox isomerization of allylic alcohols at ambient temperature catalyzed by novel ruthenium-cyclopentadienyl complexes--new insight into the mechanism

A range of ruthenium cyclopentadienyl (Cp) complexes have been prepared and used for isomerization of allylic alcohols to the corresponding saturated carbonyl compounds. Complexes bearing CO ligands show higher activity than those with PPh3 ligands. The isomerization rate is highly affected by the substituents on the Cp ring. Tetra(phenyl)methyl-substituted catalysts rapidly isomerize allylic alcohols under very mild reaction conditions (ambient temperature) with short reaction times. Substituted allylic alcohols have been isomerized by employing Ru-Cp complexes. A study of the isomerization catalyzed by [Ru(Ph5Cp)(CO)2H] (14) indicates that the isomerization catalyzed by ruthenium hydrides partly follows a different mechanism than that of ruthenium halides activated by KOtBu. Furthermore, the lack of ketone exchange when the isomerization was performed in the presence of an unsaturated ketone (1 equiv), different from that obtained by dehydrogenation of the starting allylic alcohol, supports a mechanism in which the isomerization takes place within the coordination sphere of the ruthenium catalyst.     

On the enthalpy of melting of poly(l-lactide)

Poly(l-lactide) (PLLA) is an extensively employed biodegradable semicrystalline polymer with usage from implantable medical devices and drug release matrices to environmentally friendly packaging materials. Since the morphology and crystallinity considerably determine the application field, PLLA samples with a large variation in crystallinity (going from below 20% to over 70%) were prepared by different procedures. Subsequent differences in morphology, crystallinity and thermal properties were followed by scanning electron microscopy (SEM), wide angle X-ray diffraction (WAXD) measurements and differential scanning calorimetry (DSC). The value of the enthalpy of melting of a perfectly (100%) crystalline PLLA was determined (ΔH_f = 115.7?J/g).     

Smart poly(2-hydroxyethyl methacrylate/itaconic acid) hydrogels for biomedical application

pH- and temperature-sensitive hydrogels, based on 2-hydroxyethyl methacrylate (HEMA) and itaconic acid (IA) copolymers, were prepared by γ-irradiation and characterized in order to examine their potential use in biomedical applications. The influence of comonomer ratio in these smart copolymers on their morphology, mechanical and thermal properties, biocompatibility and microbe penetration capability was investigated. The mechanical properties of copolymers were investigated using the dynamic mechanical analysis (DMA), while their thermal properties and morphology were examined by thermogravimetric analysis (TGA) and scanning electron microscopy (SEM). The morphology, mechanical and thermal properties of these hydrogels were found to be suitable for most requirements of biomedical applications. The in vitro study of P(HEMA/IA) biocompatibility showed no evidence of cell toxicity nor any considerable hemolytic activity. Furthermore, the microbe penetration test showed that neither Staphylococcus aureus nor Escherichia coli passed through the hydogel dressing; thus the P(HEMA/IA) dressing could be considered a good barrier against microbes. All results indicate that stimuli-responsive P(HEMA/IA) hydrogels have great potential for biomedical applications, especially for skin treatment and wound dressings.     

Racemization of secondary alcohols catalyzed by cyclopentadienylruthenium complexes: evidence for an alkoxide pathway by fast beta-hydride elimination-readdition

The racemization of sec-alcohols catalyzed by pentaphenylcyclopentadienyl-ruthenium complex 3a has been investigated. The mechanism involves ruthenium-alkoxide intermediates: reaction of tert-butoxide ruthenium complex 4 with a series of sec-alcohols with different electronic properties gave ruthenium complexes bearing a secondary alkoxide as a ligand. The characterization of these alkoxide complexes by NMR spectroscopy together with a study of the reaction using in situ IR spectroscopy is consistent with a mechanism in which the alkoxide substitution step and the beta-hydride elimination step occur without CO dissociation. The alkoxide substitution reaction is proposed to begin with hydrogen bonding of the incoming alcohol to the active ruthenium-alkoxide intermediate. Subsequent alkoxide exchange can occur via two pathways: i) an associative pathway involving a eta3-CpRu intermediate; or ii) a dissociative pathway within the solvent cage. Racemization at room temperature of a 1:1 mixture of (S)-1-phenylethanol and (S)-1-phenyl-[D4]-ethanol gave only rac-1-phenylethanol, and rac-1-phenyl-[D4]-ethanol, providing strong support for a mechanism in which the substrate stays coordinated to the metal center throughout the racemization, and does not leave the coordination sphere. Furthermore, racemization of a sec-alcohol bearing a ketone moiety within the same molecule does not result in any reduction of the original ketone, which rules out a mechanism where the intermediate ketone is trapped within the solvent cage. These results are consistent with a mechanism where eta3-Ph(5)C(5)-ruthenium intermediates are involved. Competitive racemization on nondeuterated and alpha-deuterated alpha-phenylethanols was used to determine the kinetic isotope effect kH/kD for the ruthenium-catalyzed racemization. The kinetic isotope effect kH/kD for p- X-C(6)H(4)CH(OH)CH(3) was 1.08, 1.27 and 1.45 for X=OMe, H, and CF3, respectively.     

On the mechanism of the unexpected facile formation of meso-diacetate products in enzymatic acetylation of alkanediols

The mechanism of the unexpected facile formation of meso-diacetate previously observed in the enzymatic resolution of dl/meso mixtures of 2,4-pentanediol and 2,5-hexanediol with Candida antarctica lipase B has been elucidated. It was found that the formation of meso-diacetate proceeds via different mechanisms for the two diols. Enzyme-catalyzed acylation of AcO-d(3) labeled (R)-monoacetates of meso-2,4-pentanediol and meso-2,5-hexanediol and analysis of the meso-diacetates obtained show that the former reaction proceeds via intramolecular acyl migration while the latter occurs via direct S-acylation of the alcohol. For the (R)-monoacetate of (R,S)-2,4-pentanediol the intramolecular acyl migration was fast and therefore direct S-acylation by the external acyl donor is suppressed. For the hexanediol monoacetate the rate ratio (pseudo E value) between (5R,2R)- and (5R,2S)-5-acetoxy-2-hexanol was experimentally determined to be k(R,R)/k(R,S) = 25, which is about 10-20 times lower than the E value for 2-pentanol and 2-octanol. In a preliminary experiment it was demonstrated that facile acyl migration in the 1,3-diol derivative can be utilized to prepare syn-1,3-diacetoxynonane (>90% syn) in high enantioselectivity (>99% ee) via a chemoenzymatic dynamic kinetic asymmetric transformation of a meso/dl mixture of 1,3-nonanediol.     

Radiation hardness of COTS EPROMs and E2PROMs

This paper examines and compares the effects of exposing commercial, off the shelf erasable programmable read-only memory (EPROM) and electrically erasable programmable read-only memory (E²PROM) components to gamma rays. Results obtained for CMOS-based EPROM (NM27C010) and E²PROM (NM93CS46) components provide evidence that EPROMs have a greater radiation hardness than E²PROMs. Moreover, the changes in EPROMs are reversible, and after erasure and reprogramming all EPROM components restore their functionality. On the other hand, changes in E²PROMs are irreversible. The obtained results are analyzed and interpreted on the basis of gamma ray interaction with the CMOS structure.     

Ammonothermal Synthesis,Crystal Structure,and Vibrational Properties of the Doubly Deprotonated Calcium Guanidinate,CaC(NH)3

We report the synthesis of the doubly deprotonated calcium guanidinate, CaC(NH)₃, from liquid ammonia and its crystal structure as determined from powder X-ray and neutron diffraction, and confirmed using CNH elemental analysis and infrared (IR) spectroscopy data. CaC(NH)₃ crystallizes in the hexagonal system with space group P6₃/m (no. 176) with Z = 2 and a = 5.2666(13) Å, c = 6.5881(6) Å and V = 158.25(4) ų. We also compare the structural similarities and differences of this phase with the isotypical strontium and ytterbium compounds.     

Combined ruthenium(II) and lipase catalysis for efficient dynamic kinetic resolution of secondary alcohols. Insight into the racemization mechanism

Pentaphenylcyclopentadienyl ruthenium complexes (3) are excellent catalysts for the racemization of secondary alcohols at ambient temperature. The combination of this process with enzymatic resolution of the alcohols results in a highly efficient synthesis of enantiomerically pure acetates at room temperature with short reaction times for most substrates. This new reaction was applied to a wide range of functionalized alcohols including heteroaromatic alcohols, and for many of the latter, enantiopure acetates were efficiently prepared for the first time via dynamic kinetic resolution (DKR). Different substituted cyclopentadienyl ruthenium complexes were prepared and studied as catalysts for racemization of alcohols. Pentaaryl-substituted cyclopentadienyl complexes were found to be highly efficient catalysts for the racemization. Substitution of one of the aryl groups by an alkyl group considerably slows down the racemization process. A study of the racemization of (S)-1-phenylethanol catalyzed by ruthenium hydride eta(5)-Ph(5)CpRu(CO)(2)H (8) indicates that the racemization takes place within the coordination sphere of the ruthenium catalyst. This conclusion was supported by the lack of ketone exchange in the racemization of (S)-1-phenylethanol performed in the presence of p-tolyl methyl ketone (1 equiv), which gave <1% of 1-(p-tolyl)ethanol. The structures of ruthenium chloride and iodide complexes 3a and 3c and of ruthenium hydride complex 8 were confirmed by X-ray analysis.