Infrared microspectroscopic study of the thermo-oxidative degradation of hydroxy-terminated polybutadiene/isophorone diisocyanate polyurethane rubber

Hydroxy-terminated polybutadiene/isophorone diisocyanate (HTPB/IPDI) polyurethane rubber which was aged in air at elevated temperatures has been studied by infrared microspectroscopy. Spectra were collected in transmission mode on microtomed samples. Analysis of sets of spectra taken across the sectioned material showed that most of the degradation occurred in the polybutadiene part of the polymer and that the urethane linkage was essentially unchanged. The trans isomer of the polybutadiene appears to be preferentially degraded compared with the vinyl isomer. The IR technique does not provide significant information about the cis isomer. The IR spectra indicated that likely degradation products included acids, esters, alcohols, and small amounts of other products containing a carbonyl functional group. Band area ratios, supported by a principal components analysis, were used to derive degradation profiles for the material. These profiles were steep-sided indicating an oxygen diffusion limited process.     

Wave functions derived from experiment. V. Investigation of electron densities,electrostatic potentials,and electron localization functions for noncentrosymmetric crystals

The constrained Hartree-Fock method using experimental X-ray diffraction data is extended and applied to the case of noncentrosymmetric molecular crystals. A new way to estimate the errors in derived properties as a derivative with respect to added Gaussian noise is also described. Three molecular crystals are examined: ammonia [NH(3)], urea [CO(NH(2))(2)], and alloxan [(CO)(4)(NH)(2)]. The energetic and electrical properties of these molecules in the crystalline state are presented. In all cases, an enhancement of the dipole moment is observed upon application of the experimental constraint. It is found that the phases of the structure factors are robustly determined by the constrained Hartree-Fock model, even in the presence of simulated noise. Plots of the electron density, electrostatic potential, and the electron localization function for the molecules in the crystal are displayed. In general, relative to the Hartree-Fock model, there is a depletion of charge around hydrogen atoms and lone pair regions, and a build-up of charge within the molecular framework near nuclei, directed along the bonds. The electron localization function plots reveal an increase in the pair density between vicinal hydrogen atoms.     

Synthesis and cross-coupling reactions of substituted 5-triflyloxyindoles

N-arylsulfonyl quinone monoimines undergo smooth cycloadditions in a [4+2] sense to yield the expected cycloadducts. The crude cycloadducts, when subjected to a short series of simple transformations, produce synthetically useful quantities of 5-triflyloxyindoles in excellent overall yields. Such compounds are excellent participants in cross-coupling chemistry.     

Contributions of the electronic spin and orbital current to the CoCl(4) (2-) magnetic field probed in polarised neutron diffraction experiments

Polarised neutron diffraction experiments conducted at 4.2 K on Cs(3)CoCl(5) crystals have been analysed by using a four-dimensional model Hilbert space made of ab initio n-electron wave functions of the CoCl(4) (2-) molecular ion. Two spin-orbit mixing coefficients and several configuration interaction coefficients have been optimized by fitting calculated magnetic structure factors to experimental ones, to obtain the best ensemble density operator that is representable in the model space. A goodness of fit, χ(2), less then 1 has been obtained for the first time for the two experimental data sets available. In the present article, the optimized density operators are used to calculate the magnetic field densities that are the genuine observables probed in neutron diffraction experiments. Density maps of such observables are presented for the first time and numerical details are provided. The respective contributions of spin density and orbital current to the magnetic field density are analyzed.     

Biological applications of amide and amino acid containing synthetic macrocycles

ABSTRACT

Amino acid derived macrocycles with elaborate well-defined stereochemistry are a unique class of compounds that have been isolated from natural sources. Macrocycles like cyclosporine, octreotide, and valinomycin have been used in multiple applications, like drugs or ion sensors. Chemists have long been fascinated by the unique molecular recognition capabilities of these macrocycles and tried to design synthetic analogs with similar functions. This article is focused on reviewing current research on amide and amino acid containing macrocycles that have been developed in research laboratories for biological recognition, specifically for anion sensing, ion transport, carbohydrate sensing, and peptide sensing.     

Novel Copolymers of Styrene and Halogen Ring‐Disubstituted 2‐Cyano‐N,N‐Dimethyl‐3‐Phenyl‐2‐Propenamides

Electrophilic trisubstituted ethylene monomers, halogen ring‐disubstituted 2‐cyano‐N,N‐dimethyl‐3‐phenyl‐2‐propenamides, RC₆H₃CH?C(CN)CON(CH₃)₂ (where R is 2,3‐dichloro, 2,4‐dichloro, 2,6‐dichloro, 3,4‐dichloro, 3,5‐dichloro, 2,3‐difluoro, 2,4‐difluoro, 2,6‐difluoro, 3,4‐difluoro, 3,5‐difluoro), were synthesized by potassium hydroxide catalyzed Knoevenagel condensation of ring‐substituted benzaldehydes and N,N‐dimethyl cyanoacetamide, and characterized by CHN elemental analysis, IR, ¹H‐ and ¹³C‐NMR. Novel copolymers of the ethylenes and styrene were prepared at equimolar monomer feed composition by solution copolymerization in the presence of a radical initiator, ABCN at 70°C. The composition of the copolymers was calculated from nitrogen analysis, and the structures were analyzed by IR, ¹H and ¹³C NMR, GPC, DSC, and TGA. High T_g of the copolymers in comparison with that of polystyrene indicates a substantial decrease in chain mobility of the copolymer due to the high dipolar character of the trisubstituted ethylene monomer unit. The gravimetric analysis indicated that the copolymers decompose in the 300–450°C range.     

Hydrogen bonding in 4‐nitrobenzene‐1,2‐diamine and two hydrohalide salts

The structures of 4‐nitrobenzene‐1,2‐diamine [C₆H₇N₃O₂, (I)], 2‐amino‐5‐nitroanilinium chloride [C₆H₈N₃O₂⁺·Cl⁻, (II)] and 2‐amino‐5‐nitroanilinium bromide monohydrate [C₆H₈N₃O₂⁺·Br⁻·H₂O, (III)] are reported and their hydrogen‐bonded structures described. The amine group para to the nitro group in (I) adopts an approximately planar geometry, whereas the meta amine group is decidedly pyramidal. In the hydrogen halide salts (II) and (III), the amine group meta to the nitro group is protonated. Compound (I) displays a pleated‐sheet hydrogen‐bonded two‐dimensional structure with R₂²(14) and R₄⁴(20) rings. The sheets are joined by additional hydrogen bonds, resulting in a three‐dimensional extended structure. Hydrohalide salt (II) has two formula units in the asymmetric unit that are related by a pseudo‐inversion center. The dominant hydrogen‐bonding interactions involve the chloride ion and result in R₄²(8) rings linked to form a ladder‐chain structure. The chains are joined by N—H...Cl and N—H...O hydrogen bonds to form sheets parallel to (010). In hydrated hydrohalide salt (III), bromide ions are hydrogen bonded to amine and ammonium groups to form R₄²(8) rings. The water behaves as a double donor/single acceptor and, along with the bromide anions, forms hydrogen bonds involving the nitro, amine, and ammonium groups. The result is sheets parallel to (001) composed of alternating R₅⁵(15) and R₆⁴(24) rings. Ammonium N—H...Br interactions join the sheets to form a three‐dimensional extended structure. Energy‐minimized structures obtained using DFT and MP2 calculations are consistent with the solid‐state structures. Consistent with (II) and (III), calculations show that protonation of the amine group meta to the nitro group results in a structure that is about 1.5 kJ mol⁻¹ more stable than that obtained by protonation of the para‐amine group. DFT calculations on single molecules and hydrogen‐bonded pairs of molecules based on structural results obtained for (I) and for 3‐nitrobenzene‐1,2‐diamine, (IV) [Betz & Gerber (2011). Acta Cryst. E 67 , o1359] were used to estimate the strength of the N—H...O(nitro) interactions for three observed motifs. The hydrogen‐bonding interaction between the pairs of molecules examined was found to correspond to 20–30 kJ mol⁻¹.     

纳米晶枝CuAu 合金催化剂对二氧化碳电催化还原性能的研究

利用可再生清洁能源将CO₂转化为CO和其他小分子是合成含碳燃料的可观方法之一。间歇性可再生能源存储的重要策略之一是将二氧化碳进行电化学还原。选择具有高活性和稳定性的电催化剂对于电化学还原CO₂至关重要。在这项研究中,我们使用简单的电沉积方法合成了具有纳米晶枝状结构的CuAu合金电极。各项表征显示原子比约为1:1的CuAu纳米枝晶对CO₂的电化学还原具有出色的催化活性。合成的主要产物是H₂和CO,这是合成气体是合成天然气,氨和甲醇合成的中间体。电化学阻抗谱（EIS）测量表明,相对于Cu和Au电沉积催化剂,CuAu纳米晶枝状催化剂具有相对低的电荷转移阻力。CuAu纳米枝晶催化剂是一种具有潜在的转化CO₂为合成气体的高活性电催化剂。