Fabrication of a stable inorganic-organic hybrid multilayer film with uniform and dense inorganic nanoparticle deposition

A stable inorganic-organic hybrid multilayer film with homogeneous and dense inorganic nanoparticle deposition was constructed by coating ZrO2 nanoparticles with poly(4-sodium styrenesulfonate) (PSS) and irradiating multilayer film assembled from PSS-coated ZrO2 nanoparticles and a diazo-resin (DR).     

Prediction of African Swine Fever Virus Inhibitors by Molecular Docking-Driven Machine Learning Models

African swine fever virus (ASFV) causes a highly contagious and severe hemorrhagic viral disease with high mortality in domestic pigs of all ages. Although the virus is harmless to humans, the ongoing ASFV epidemic could have severe economic consequences for global food security. Recent studies have found a few antiviral agents that can inhibit ASFV infections. However, currently, there are no vaccines or antiviral drugs. Hence, there is an urgent need to identify new drugs to treat ASFV. Based on the structural information data on the targets of ASFV, we used molecular docking and machine learning models to identify novel antiviral agents. We confirmed that compounds with high affinity present in the region of interest belonged to subsets in the chemical space using principal component analysis and k-means clustering in molecular docking studies of FDA-approved drugs. These methods predicted pentagastrin as a potential antiviral drug against ASFVs. Finally, it was also observed that the compound had an inhibitory effect on AsfvPolX activity. Results from the present study suggest that molecular docking and machine learning models can play an important role in identifying potential antiviral drugs against ASFVs.     

Effects of controllable process factors on Al rear surface bumps in Si solar cells

High efficiency solar cells require good back surface field passivation and high back reflectance in the rear Al region. In module processes, wafer-based solar cell can break through stress during soldering uneven rear aluminum surfaces - a serious problem that affects throughput. This work examined rear surfaces with respect to controllable process factors such as ramping and cooling rates during rapid thermal processing, and the fineness of aluminum powder used in the screen-printed paste. A faster ramp up rate resulted in a uniform temperature gradient between the aluminum and silicon surfaces. As a results, the bumps on the aluminum surface were small and of high density. Fine aluminum metal powder in the paste for screen-printing contact points resulted in large distribution, high density bumps. Bumps formed during cooling in metallization, their sizes and densities were dependent the on uniformity of the aluminum and silicon liquid wetting of the silicon surface.     

Influence of SiNx:H film properties according to gas mixture ratios for crystalline silicon solar cells

The Hydrogenated silicon nitride (SiN_x:H) using plasma enhanced chemical vapor deposition is widely used in photovoltaic industry as an antireflection coating and passivation layer. In the high temperature firing process, the SiN_x:H film should not change the properties for its use as high quality surface layer in crystalline silicon solar cells. For optimizing surface layer in crystalline silicon solar cells, by varying gas mixture ratios (SiH₄ + NH₃ + N₂, SiH₄ + NH₃, SiH₄ + N₂), the hydrogenated silicon nitride films were analyzed for its antireflection and surface passivation (electrical and chemical) properties. The film deposited with the gas mixture of SiH₄ + NH₃ + N₂ showed the best properties in before and after firing process conditions.The single crystalline silicon solar cells fabricated according to optimized gas mixture condition (SiH₄ + NH₃ + N₂) on large area substrate of size 156 mm × 156 mm (Pseudo square) was found to have the conversion efficiency as high as 17.2%. The reason for the high efficiency using SiH₄ + NH₃ + N₂ is because of the good optical transmittance and passivation properties. Optimized hydrogenated silicon nitride surface layer and high efficiency crystalline silicon solar cells fabrication sequence has also been explained in this study.     

Fabrication of superhydrophobic surface from a supramolecular organosilane with quadruple hydrogen bonding

A supramolecular organosilane, 2-(3-(triethoxysilyl)propylaminocarbonylamino)-6-methyl-4[1H]pyrimidinone comprising quadruple hydrogen bonds has been synthesized in one step from commercially available starting materials. The synthesized supramolecular organosilane can be stabilized and phase-separated by dimerization via the linear array of quadruple hydrogen bonds in solution. This property of the supramolecular organosilane has been exploited to fabricate structuring materials having a superhydrophobic surface property. We have successfully generated the interconnected granular structure with adequate roughness for superhydrophobicity via sol-gel process.     

Point spectrum of elliptic operators in fibered half-cylinders and the related completeness problem

We consider an elliptic system in a half-cylinder ₊ × with coefficients constant in the direction of the axis and not necessarily smooth. We take different boundary conditions on {0} × and Dirichlet condition on {0}×. This defines a self-adjoint operatorA ^D. The main result in this paper is thatA ^D does not have eigenvalues. This answers conjecture 1.6 raised in [3]. When is bounded, we use this result to prove the completeness of a part of the family of eigenvectors, and associated vectors, of a corresponding operator pencils.This work was supported by INRIA, France, and partially by UCLA.     

Effect of sorbitol doping in PEDOT:PSS on the electrical performance of organic photovoltaic devices

Organic photovoltaic cells have important advantages, such as low cost and mechanical flexibility. The conducting polymer poly(3,4 ethylenedioxy-thiophene):poly(styrene sulfonate) (PEDOT:PSS) has been widely used as an interfacial layer or a polymer electrode in polymer electronic devices, such as photovoltaic devices and light-emitting diodes. In this report, we discuss the direct current (DC) conductivity of PEDOT:PSS films containing various weight ratios of sorbitol dopant. The work function is shown to steadily decrease with increasing dopant content. With different dopant contents, illuminated current–voltage photovoltaic characteristics were observed. Ultraviolet photoelectron spectroscopy (UPS) analysis revealed that the work function of the PEDOT:PSS was affected by its sorbitol content. The morphologies of the doped PEDOT:PSS films were characterized by atomic force microscopy (AFM). For the device fabrication, we made organic photovoltaic cells by a spin-coating process and Al deposition by thermal evaporation. The sorbitol dopant is able to improve the efficiency of the device.     

A simple fabrication method for mechanically robust superhydrophobic surface by hierarchical aluminum hydroxide structures

Superhydrophobic surfaces with uniformly superhydrophobic surface where nano-scale structures were fabricated by alkali surface modification method and self-assembled monolayer coating. To enhance mechanical durability of the superhydrophobicity, we propose the fabrication process for dual-scale hierarchical structures combining both microstructure via sandblasting techniques and the nanostructured aluminum hydroxide layer. The superhydrophobic surfaces fabricated by both methods exhibited a high water contact angle and very low contact angle hysteresis. By forming the hierarchical structure, the mechanical durability of superhydrophobic aluminum hydroxide surface was improved. The resulting hierarchical structures are suitable for diverse applications of aluminum in various industrial areas, including self-cleaning, anti-frosting, and microfluidic devices for rigorous environments.     

Influence of front contact work function on silicon heterojunction solar cell performance

In this study, we present numerical and experimental analyses of the effect of the work function of the transparent conducting oxide (TCO) on the performance of silicon heterojunction solar cells. The simulation results showed that the solar cell performance such as V_oc and FF were strongly affected by the work function of TCO films due to band bending. The experimental analysis was carried out by preparing Zn–In–Sn–O films with varying work function by varying the composition. The compositional dependence of the work function, optical and electronic properties of Zn–In–Sn–O films was examined, and the performance of the silicon heterojunction solar cells with corresponding TCO films was analyzed. The electrical properties and work function in Zn–In–Sn–O films were significantly influenced by Zn content, and Zn–In–Sn–O film with 12.7 at.% Zn content, which had the highest work function and lowest resistivity among the studied films, resulted in the highest conversion efficiency of solar cell due to increased V_oc and FF. It was shown that the behavior of performance parameters in silicone heterojunction solar cells closely correlated with the work function and electrical properties of TCO films.     

Development of surface-textured hydrogenated ZnO:Al thin-films for μc-Si solar cells

This study addresses the optimization of rf magnetron-sputtered hydrogenated ZnO:Al (HAZO) films as front contacts in microcrystalline silicon solar cells. The front contact of a solar cell has to be highly conductive and highly transparent to visible and infrared radiation. Furthermore, it has to scatter the incident light efficiently in order for the light to be effectively trapped in the underlying silicon layers. In this research, HAZO films were rf-magnetron-sputtered on glass substrates from a ceramic (98 wt% ZnO, 2 wt% Al₂O₃) target. Various compositions of AZO films on glass substrates were prepared by changing the H₂/(Ar + H₂) ratio of the sputtering gas. The resulting smooth films exhibited high transparencies (T  85% for visible light including all reflection losses) and excellent electrical properties (ρ = 2.7 × 10⁻⁴ Ω · cm). Depending on their structural properties, these films developed different surface textures upon post-deposition etching using diluted hydrochloric acid. The light-scattering properties of these films could be controlled simply by varying the etching time. Moreover, the electrical properties of the films were not affected by the etching process. Therefore, within certain limits, it is possible to optimize the electro-optical and light-scattering properties separately. The microcrystalline silicon (μc-Si:H)-based p–i–n solar cells prepared using these new texture-etched AZO:H substrates showed high quantum efficiencies in the long wavelength range, thereby demonstrating effective light trapping. Using the optimum AZO:H thin-film textured surface, we achieved a p–i–n μc-Si solar cell efficiency of 7.78%.