Study on the immobilization of anti-IgG on Au-colloid modified gold electrode via potentiometric immunosensor, cyclic voltammetry, and electrochemical impedance techniques

The immobilization of anti-IgG on Au-colloid modified gold electrodes has been investigated. A cleaned gold electrode was first immersed in a mercaptoethylamine (AET) solution, and then gold nanoparticles were chemisorbed onto the thiol groups of the mercaptoethylamine. Finally, anti-IgG was adsorbed onto the surface of the gold nanoparticles. Potentiometric immunosensor, cyclic voltammetry, and electrochemical impedance techniques were used to investigate the immobilization of anti-IgG on Au colloids. In the impedance spectroscopic study, an obvious difference of the electron transfer resistance between the Au-colloid modified electrode and the bare gold electrode was observed. The cyclic voltammogram tends to be more irreversible with increased anti-IgG concentration. Using the potentiometric immunosensor, the proposed technique is based on that the specific agglutination of antibody-coated gold nanoparticles, averaging 16 nm in diameter, in the presence of the corresponding antigen causes a potential change that is monitored by a potentiometry. It is found that the developed immunoagglutination assay system is sensitive to the concentration of IgG antigen as low as 12 ng mL(-1). Experimental results showed that the developed technique is in satisfactory agreement with the ELISA method, and that gold nanoparticles can be used as a biocompatible matrix for antibody or antigen immobilization.     

Dual‐Amplification of Antigen–Antibody Interactions via Backfilling Gold Nanoparticles on (3‐Mercaptopropyl) Trimethoxysilane Sol‐Gel Functionalized Interface

A new dual‐amplification strategy of electrochemical signaling from antigen–antibody interactions was proposed via backfilling gold nanoparticles on (3‐mercaptopropyl) trimethoxysilane sol‐gel (MPTS) functionalized interface. The MPTS was employed not only as a building block for the electrode surface modification but also as a matrix for ligand functionalization with first amplification. The second signal amplification strategy introduced in this study was based on the backfilling immobilization of nanogold particles to the immunosensor surface. Several coupling techniques, such as with nanogold but not MPTS or with MPTS but not nanogold, were investigated for the determination of carcinoembryonic antigen (CEA) as a model, and a very good result was obtained with nanogold and MPTS coupling immunosensor. With the noncompetitive format, the formation of the antigen–antibody complex by a simple one‐step immunoreaction between the immobilized anti‐CEA and CEA in sample solution introduced membrane potential change before and after the antigen–antibody interaction. Under optimal conditions, the proposed immunosensor exhibited a good electrochemical behavior to CEA in a dynamic concentration range of 4.4 to 85.7 ng/mL with a detection limit of 1.2 ng/mL (at 3 δ). Moreover, the precision, reproducibility and stability of the as‐prepared immunosensor were acceptable. Importantly, the proposed methodology would be valuable for diagnosis and monitoring of carcinoma and its metastasis.     

New Insights on Potentiometric Immunosensor at Carbon Fiber Microelectrode for Alpha-Fetoprotein in Hepatocellular Carcinoma

Herein, we investigated the analytical features of potentiometric immunosensors for detection of alpha-fetoprotein (AFP) in hepatocellular carcinoma at different electrodes, such as carbon fiber microelectrode (CFME) and carbon-disk electrode (CDE), respectively. To construct such an immunosensor, anti-AFP capture antibodies were first conjugated covalently onto the activated electrodes through typical carbodiimide coupling. Thereafter, one-step immunoreaction protocol was successfully introduced to develop a new potentiometric immunoassay upon addition of AFP. Accompanying the antigen-antibody reaction, the surface charges of the modified electrodes were changed for the readout of electric potential. Results indicated that the linear range of CDE-based immunosensor was 0.1–100 ng mL⁻¹ AFP, whereas the assay sensitivity by using CFME could be further increased to 3.2 pg mL⁻¹ with the linear range from 0.01 to 500 ng mL⁻¹ AFP. Meanwhile, CFME-based immunosensor showed high sensitivity, good reproducibility and specificity, and could be utilized for the analysis of human serum specimens with consistent results relative to commercialized ELISA kit.     

国际市场营销管理与决策信息系统(IMMADIS)原型研究

分析归纳了国际市场营销管理与信息的特征，把系统目标分解为三级，依此提出的国际市场营销管理与决策信息系统结构模式，充分考虑了计算机在企业管理中应用的优势与特点，同时又考虑到国情，便于企业开发实施。     

Non-enzymatic electrochemical immunoassay using noble metal nanoparticles: a review

Electrochemical immunodetection has attracted considerable attention due to its high sensitivity, low cost and simplicity. Large efforts have recently made in order to design ultrasensitive assays. Noble metal nanoparticles (NM-NPs) offer advantages such as high conductivity and large surface-to-volume ratio. NM-NPs therefore are excellent candidates for developing electrochemical platforms for immunodetection and as signal tags. The use of biofunctionalized NM-NPs often results in amplified recognition via stronger loading of signal tags, and also in enhanced signal. This review (with 87 references) gives an overview on the current state in the use of NM-NPs in Non-enzymatic electrochemical immunosensing. We discuss the application of NM-NPs as electrode matrices and as electroactive labels (either as a carrier or as electrocatalytic labels), and compare the materials (mainly nanoparticles of gold, platinum, or of bimetallic materials) in terms of performance (for example by increasing sensitivity via label amplification or via high densities of capture molecules). A conclusion covers current challenges and gives an outlook. Rather than being exhaustive, the review focuses on representative examples that illustrate novel concepts and promising applications. NM-NPs based immunosensing opens a series of concepts for basic research and offers new tools for determination of trace amounts of protein-related analytes in environment and clinical applications.

ᅟ

     

Sensitive detection of hydrogen peroxide in foodstuff using an organic�Cinorganic hybrid multilayer-functionalized graphene biosensing platform

We report on a new electrochemical biosensing strategy for the sensitive detection of hydrogen peroxide (H₂O₂) in foodstuff samples. It is based on a gold electrode modified with layer of graphene patterned with a multilayer made from an organic?Cinorganic hybrid nanomaterial. Initially, a layer of thionine (Th) was assembled on the surface of the graphene nanosheets, and these were then cast on the surface of the electrode for the alternate assembly of gold nanoparticles and horseradish peroxidase. The large surface-to-volume ratio and high conductivity of the nanosheets provides a benign microenvironment for the construction of the biosensor. The use of such a multilayer not only shortens the electron transfer pathway of the active center of the enzyme due to the presence of gold nanoparticles, but also enhances the electrocatalytic efficiency of the biosensor toward the reduction of H₂O₂. The electrochemical characteristics of the biosensor were studied by cyclic voltammetry and chronoamperometry. The number of layers, the operating potential, and the pH of the supporting electrolyte were optimized. Linear response is obtained for the range from 0.5???M to 1.8?mM of H₂O₂, the detection limit is 10 nM (at S/N?=?3), and 95% of the steady-state current is reached within 2?s. The method was applied to sense H₂O₂ in spiked sterilized milk and correlated excellently with the permanganate titration method.

A graphene-based Au(111) platform for electrochemical biosensing based catalytic recycling of products on gold nanoflowers

A novel, enzyme-free amperometric immunoassay of biomarkers with sensitive enhancement was designed by using gold nanoflower-labeled detection antibodies toward the catalytic reduction of p-nitrophenol and redox cycling of p-aminophenol on a graphene-based Au(111) platform.     

Specific immunoreaction-induced controlled release strategy for sensitive impedance immunoassay of a cancer marker

A simple and facile impedance immunoassay strategy for sensitive detection of alpha-fetoprotein (AFP), as a model cancer marker, was developed by using target-induced release of nanogold particle-labelled anti-AFP antibodies from polyvinylpyrrolidone-coated magnetic carbon nanotubes.     

An enzyme-free quartz crystal microbalance biosensor for sensitive glucose detection in biological fluids based on glucose/dextran displacement approach

A sensitive and facile quartz crystal microbalance (QCM) biosensor for glucose detection in biological fluids was developed by means of a displacement-type assay mode between glucose and its analogy dextran for concanavalin A (ConA) binding sites on a graphene-based sensing platform. To construct such a displacement-based sensor, phenoxy-derived dextran (DexP) molecules were initially assembled onto the surface of graphene-coated QCM probe via π-π stacking interaction, and ConA molecules were then immobilized on the dextran through the dextran-ConA interaction. Upon addition of glucose, the analyte competed with the dextran for the ConA, and displaced it from the QCM probe, leading to a change in the frequency. Under optimal conditions, the frequency change relative to the basic resonant frequency was proportional to glucose concentration, and exhibited a dynamic range from 0.01 to 7.5 mM with a low detection limit (LOD) of 5.0 μM glucose (at 3σ). The relative standard deviations (RSDs) were below 6.2% and 9.0% for the reproducibility and selectivity of the QCM glucose sensors, respectively. In addition, the assay system was evaluated with glucose spiking samples into the distilled water and blank cattle serum, receiving in excellent correlation with the referenced values.