Synthesis of Benzazepine Analogues of Noscapine

The synthesis of benzazepine analogues of the opium alkaloid noscapine ( 1 ) is described. The benzazepines 2 and 3 were prepared starting from nornarceine ethyl ester ( 4 ; readily available from 1 ) in several steps. X-Ray analysis of compound 2 revealed that it is not a diastereosisomer mixture but a racemate of the threo-form and thus has the same configuration as 1 .     

Benzotriazole is thermally more stable than 1,2,3-triazole

TGA, DTA and DSC analyses indicate that benzotriazole is significantly more stable thermally than 1,2,3-triazole.     

Electroactive conducting polymers for corrosion control

There is an intensive effort underway to develop new corrosion control coatings for structural metals. In part, this effort has been motivated by the desire to replace chromium(VI)-containing coatings currently used for corrosion control of iron and aluminum alloys. Cr(VI) has been shown to be hazardous to the environmental and to human health, and its use in many countries will be sharply curtailed in the coming years. Electroactive conducting polymers (ECPs) represent a class of interesting materials currently being explored for use in corrosion control coating systems, possibly as a replacement for Cr(VI)-based coatings. The electroactivity and the electronic conductivity (or semiconductivity) of ECPs set them apart from traditional organic coatings. As with chromate, interesting and potentially beneficial interactions of ECPs with active metal alloys such as steel and aluminum are anticipated, with concomitant alteration of their corrosion behavior. A review of this active research area will be presented in two parts. Here in Part 1, a general introduction to the topic of corrosion control by ECPs will be presented, including an overview of corrosion and its control by traditional methods, an introduction to ECPs and their properties, and a discussion of the processing issues surrounding the use of ECPs as coatings. Part 1 also includes a review of the literature on the use of ECPs as coatings (or components of coatings) on non-ferrous active metals, principally aluminum and aluminum alloys, although some work on zinc, copper, silver, titanium and silicon will also be described. In Part 2 of this review (to be published in the next issue of this journal), the rather extensive literature on the use of ECPs for the corrosion control of ferrous alloys (steels) will be reviewed. Electronic Publication     

Products of mixed covering arrays of strength two

A covering array CA(N;t,k, v is an N × k array such that every N × t subarray contains all t‐tuples from v symbols at least once, where t is the strength of the array. Covering arrays are used to generate software test suites to cover all t‐sets of component interactions. The particular case when t = 2 (pairwise coverage) has been extensively studied, both to develop combinatorial constructions and to provide effective algorithmic search techniques. In this paper, a simple “cut‐and‐paste” construction is extended to covering arrays in which different columns (factors) admit different numbers of symbols (values); in the process an improved recursive construction for covering arrays with t = 2 is derived. © 2005 Wiley Periodicals, Inc. J Combin Designs 14: 124–138, 2006     

Activity of microemulsion-based nanoparticles at the human bio-nano interface: concentration-dependent effects on thrombosis and hemolysis in whole blood

Background: Although microemulsion-based nanoparticles (MEs) may be useful for drug delivery or scavenging, these benefits must be balanced against potential nanotoxicological effects in biological tissue (bio-nano interface). We investigated the actions of assembled MEs and their individual components at the bio-nano interface of thrombosis and hemolysis in human blood. Methods: Oil-in-water MEs were synthesized using ethylbutyrate, sodium caprylate, and pluronic F-68 (ME4) or F-127 (ME6) in 0.9% NaCl_w/v. The effects of MEs or components on thrombosis were determined using thrombo-elastography, platelet contractile force, clot elastic modulus, and platelet counting. For hemolysis, ME or components were incubated with erythrocytes, centrifuged, and washed for measurement of free hemoglobin by spectroscopy. Results and conclusions: The mean particle diameters (polydispersity index) for ME6 and ME4 were 23.6 ± 2.5 nm (0.362) and 14.0 ± 1.0 nm (0.008), respectively. MEs (0, 0.03, 0.3, 3 mM) markedly reduced the thromboelastograph maximal amplitude in a concentration-dependent manner (49.0 ± 4.2, 39.0 ± 5.6, 15.0 ± 8.7, 3.8 ± 1.3 mm, respectively), an effect highly correlated (r2 = 0.94) with similar changes caused by pluronic surfactants (48.7 ± 10.9, 30.7 ± 15.8, 20.0 ± 11.3, 2.0 ± 0.5) alone. Neither oil nor sodium caprylate alone affected the thromboelastograph. The clot contractile force was reduced by ME (27.3 ± 11.1–6.7 ± 3.4 kdynes/cm², P = 0.02, n = 5) whereas the platelet population not affected (175 ± 28–182 ± 23 10⁶/ml, P = 0.12, n = 6). This data suggests that MEs reduced platelet activity due to associated pluronic surfactants, but caused minimal changes in protein function necessary for coagulation. Although pharmacological concentrations of sodium caprylate caused hemolysis (EC₅₀ = 213 mM), MEs and pluronic surfactants did not disrupt erythrocytes. Knowledge of nanoparticle activity and potential associated nanotoxicity at this bio-nano interface enables rational ME design for in vivo applications.     

Rank estimation in reduced-rank regression

Reduced rank regression assumes that the coefficient matrix in a multivariate regression model is not of full rank. The unknown rank is traditionally estimated under the assumption of normal responses. We derive an asymptotic test for the rank that only requires the response vector have finite second moments. The test is extended to the nonconstant covariance case. Linear combinations of the components of the predictor vector that are estimated to be significant for modelling the responses are obtained.     

Metallo‐supramolecular block copolymer micelles: Improved preparation and characterization

Micelles prepared from amphiphilic block copolymers in which a poly(styrene) segment is connected to a poly(ethylene oxide) block via a bis‐(2,2′:6′,2″‐terpyridine‐ruthenium) complex have been intensely studied. In most cases, the micelle populations were found to be strongly heterogeneous in size because of massive micelle/micelle aggregation. In the study reported in this article we tried to improve the homogeneity of the micelle population. The variant preparation procedure developed, which is described here, was used to prepare two “protomer”‐type micelles: PS₂₀‐[Ru]‐PEO₇₀ and PS₂₀‐[Ru]‐PEO₃₇₅. The dropwise addition of water to a solution of the compounds in dimethylformamide was replaced by the controlled addition of water by a syringe pump. The resulting micelles were characterized by sedimentation velocity and sedimentation equilibrium analyses in an analytical ultracentrifuge and by transmission electron microscopy of negatively stained samples. Sedimentation analysis showed virtually unimodal size distributions, in contrast to the findings on micelles prepared previously. PS₂₀‐[Ru]‐PEO₇₀ micelles were found to have an average molar mass of 318,000 g/mol (corresponding to 53 protomers per micelle, which is distinctly less than after micelle preparation by the standard method) and an average hydrodynamic diameter (d_h) of 18 nm. For PS₂₀‐[Ru]‐PEO₃₇₅ micelles, the corresponding values were M = 603,000 g/mol (31 protomers per micelle) and d_h = 34 nm. The latter particles were found to be identical to the “equilibrium” micelles prepared in pure water. Both micelle types had a very narrow molar mass distribution but a much broader distribution of s values and thus of hydrodynamic diameters. This indicates a conformational heterogeneity that is stable on the time scale of sedimentation velocity analysis. The findings from electron microscopy were in disagreement with those from the sedimentation analysis both in average micelle diameter and in the width of the distributions, apparently because of imperfections in the staining procedure. The preparation procedure described also may be useful in micelle formation from other types of protomers. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 4458–4465, 2004     

New strong interactions: From QCD to LHC

The concept of strong interactions need not be limited to the sector of physics taken by QCD. While this domain is investigated by RHIC, LHC will be able to probe potential new strong interactions simultaneously: Finding the precise mechanism for electroweak symmetry breaking is one of the prime problems of physics. Intricately linked to this point is the question after the true nature or even the existence of the Higgs boson. Here, we present stronly interacting theories providing an explanation for the hierarchy problem and leading to a light composite Higgs boson, favoured by experimental data. Our variation of the standard model is consistent with precision data. We achieve this accordance by using technifermions in a higher representation of their gauge group. Anomaly conditions require at least one extra lepton family for some of the theories whereby they contain a natural dark matter candidate. We can accurately determine the masses of said leptons from experimental data.     

Teaching proof in the context of physics

This paper describes an application of statics to geometrical proofs in the classroom. The aim of the study was to find out whether the use of concepts and arguments from statics can help students understand and produce proofs of geometrical theorems. The two theorems studied were (1) that the medians in a triangle meet at a single point which is the centre of gravity of the triangle, and (2) the Varignon theorem, that the lines joining the midpoints of successive sides of a quadrilateral form a parallelogram. The classroom experiment showed that most students were successful in using arguments from statics in their proofs, and that they gained a better understanding of the theorems. These findings lend support to the claim that the introduction of statics helps students produce proofs and grasp their meaning.