Effects of structural properties of silicon carbide-derived carbons on their electrochemical double-layer capacitance in aqueous and organic electrolytes

High surface area silicon carbide-derived carbons (Si-CDCs) synthesized by chlorination of beta silicon carbide (βSiC) with two different particle sizes (6 μm and 50 nm) show different porosities with graphitic structure. Transmission electron microscopy, Raman spectroscopy and argon (Ar) and carbon dioxide (CO₂) sorption analyses are used to examine the textural properties of the Si-CDCs. The results show that the particle size of the precursor affects the surface area and porosity of carbons. Furthermore, an additional heat treatment of the Si-CDC with 50-nm particle size for 24 h at 1,000 °C results in a collapse of the pore structure and reduces the surface area. The capacitive behaviours are investigated in H₂SO₄ and in tetraethyl ammonium tetrafluoroborate (TEABF₄)/acetonitrile (AN). The electrochemical performance of the Si-CDCs is influenced by the particle size, surface area, pore volume and pore size distribution. The Si-CDCs exhibit capacitances in 1 M H₂SO₄ of up to 179 F g^?1 and very stable charge–discharge performance over 5,000 cycles. This study shows the crucial importance of ultramicropores less than 1 nm combined with nanosized particles for achieving high capacitance in aqueous electrolyte. Moreover, the graphitic degree at the surface of the Si-CDCs enhances considerably the rate capability and stability in both electrolytes.     

Investigation of the complexation of essential oil components with cyclodextrins

The formation of inclusion complexes of six essential oil (EO) components (β-caryophyllene, cis-ocimene, trans-ocimene, sabinene hydrate (thujanol), γ-terpinene and α-terpineol) with six cyclodextrins (CDs) (α-CD, β-CD, γ-CD, HP-β-CD, RAMEB and CRYSMEB) was investigated by using static headspace-gas chromatography and UV–visible spectroscopy. Retention studies showed that CDs could efficiently reduce the volatility of EO components except for β-caryophyllene with α-CD. In this case, no inclusion complex was detected while for other compounds the formation of 1:1 inclusion complexes was observed. Results revealed that the inclusion stability mainly depends on geometric complementarity between encapsulated molecule and CD's cavity. Molecular modelling was used to investigate the complementarities between host and guest. Thus, CDs could efficiently be regarded as promising encapsulants for EO components leading to improve their application in cosmetic, pharmaceutical and agriculture fields.     

Synthesis of 1-(2-Fluorophenyl)pyrazoles by 1,3-Dipolar Cycloaddition of the Corresponding Sydnones

3-Arylsydnones bearing fluorine and bromine atoms on the benzene ring were synthesized from N-nitroso-2-fluorophenylglycines and characterized by NMR spectroscopy. These were employed further in synthesis of the corresponding 1-(2-fluorophenyl)pyrazoles by 1,3-dipolar cycloaddition reaction with dimethyl acetylenedicarboxylate (DMAD) as activated dipolarophile. The sydnones as reaction intermediates were characterized by single crystal X-ray diffraction analysis showing interesting features such as halogen bonding as an important interaction in modeling the crystal structure.     

Encapsulation of Risperidone by Methylated β-Cyclodextrins: Physicochemical and Molecular Modeling Studies

Risperidone (RSP) is an atypical antipsychotic drug which acts as a potent antagonist of serotonin-2 (5TH2) and dopamine-2 (D2) receptors in the brain; it is used to treat schizophrenia, behavioral and psychological symptoms of dementia and irritability associated with autism. It is a poorly water soluble benzoxazole derivative with high lipophilicity. Supramolecular adducts between drug substance and two methylated β-cyclodextrins, namely heptakis(2,6-di-O-methyl)-β-cyclodextrin (DM-β-CD) and heptakis(2,3,6-tri-O-methyl)-β-cyclodextrin (TM-β-CD) were obtained in order to enhance RSP solubility and improve its biopharmaceutical profile. The inclusion complexes were evaluated by means of thermoanalytical methods (TG—thermogravimetry/DTG—derivative thermogravimetry/HF—heat flow), powder X-ray diffractometry (PXRD), universal-attenuated total reflectance Fourier transform infrared (UATR-FTIR), UV spectroscopy and saturation solubility studies. Job’s method was employed for the determination of the stoichiometry of the inclusion complexes, which was found to be 2:1 for both guest–host systems. Molecular modeling studies were carried out for an in-depth characterization of the interaction between drug substance and cyclodextrins (CDs). The physicochemical properties of the supramolecular systems differ from those of RSP, demonstrating the inclusion complex formation between drug and CDs. The RSP solubility was enhanced as a result of drug encapsulation in the CDs cavity, the higher increase being obtained with DM-β-CD as host; the guest–host system RSP/DM-β-CD can thus be a starting point for further research in developing new formulations containing RSP, with enhanced bioavailability.     

Thermogravimetric analysis of layered double hydroxides with chloramphenicol and salicylate in the interlayer space

The thermal behavior of the new inorganic-organic nanohybrid materials obtained by intercalation of chloramphenicol and salicylate into layered double hydroxides (LDHs) by direct synthesis method, anion exchange reaction and the reconstruction method was evaluated by dynamic thermogravimetric analysis in air, at heating rates of 5°C min⁻¹. The XRD patterns of the samples are characteristic for those of well crystallized solids with layered double hydroxide structures. The FTIR spectroscopy results show the presence of the organic compound within the network structure of the synthesized LDHs. The kinetic parameters (reaction order (n) apparent activation energy (E _a) and pre-exponential factor (lnA) were calculated by the Coats-Redfern method. The compensation effects were determined.     

Forcing operators on MTL‐algebras

We study the forcing operators on MTL‐algebras, an algebraic notion inspired by the Kripke semantics of the monoidal t ‐norm based logic (MTL). At logical level, they provide the notion of the forcing value of an MTL‐formula. We characterize the forcing operators in terms of some MTL‐algebras morphisms. From this result we derive the equality of the forcing value and the truth value of an MTL‐formula (© 2011 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Photodynamic therapy of nonmelanoma skin cancer with topical hypericum perforatum extract--a pilot study.

Hypericin, the photoactive compound of Hypericum perforatum, is probably the most powerful photosensitizer found in nature. This compound has shown high potency in the photodynamic treatment of tumor cells. However, there is only limited knowledge regarding the photodynamic effect of hypericin on nonmelanoma skin cancer cells. The aim of this prospective study was to investigate the efficacy of photodynamic therapy with topical application of an extract of H. perforatum in actinic keratosis, basal cell carcinoma (BCC) and morbus Bowen (carcinoma in situ). The study was carried out on 34 patients--eight with actinic keratoses (AKs), 21 with BCC and five with Bowen's disease. The extract of H. perforatum was applied on the skin lesions under occlusion and that was followed by irradiation with 75 J cm(-2) of red light 2 h later. The treatment was performed weekly for 6 weeks on average. The percentage of complete clinical response was 50% for AKs, 28% in patients with superficial BCC and 40% in patients with Bowen's disease. There was only a partial remission seen in patients with nodular BCCs. A complete disappearance of tumor cells was found in the histologic preparation of 11% of patients with superficial BCCs and 80% in the patients with Bowen's disease. All patients complained of burning and pain sensations during irradiation. Although the results of this first clinical trial could be regarded as disappointing, there are still possibilities for improvement. Better preparation of the lesions, enhancement of hypericin delivery and other types of light exposure procedures could significantly improve the clinical outcomes of this relatively inexpensive treatment modality.     

Impact of silica environment on hyperfine interactions in 𝜖-Fe2O3 nanoparticles

Magnetic nanoparticles have found broad applications in medicine, especially for cell targeting and transport, and as contrast agents in MRI. Our samples of ??-Fe₂O₃ nanoparticles were prepared by annealing in silica matrix, which was leached off and the bare particles were then coated with amorphous silica layers of various thicknesses. The distribution of particle sizes was determined from the TEM pictures giving the average size ～20 nm and the thickness of silica coating ～5; 8; 12; 19 nm. The particles were further characterized by the XRPD and DC magnetic measurements. The nanoparticles consisted mainly of ??-Fe₂O₃ with admixtures of ～1 % of the α phase and less than 1 % of the γ phase. The hysteresis loops displayed coercivities of ～2 T at room temperature. The parameters of hyperfine interactions were derived from transmission Mössbauer spectra. Observed differences of hyperfine fields for nanoparticles in the matrix and the bare ones are ascribed to strains produced during cooling of the composite. This interpretation is supported by slight changes of their lattice parameters and increase of the elementary cell volume deduced from XRD. The temperature dependence of the magnetization indicated a two-step magnetic transition of the ??-Fe₂O₃ nanoparticles spread between ～85 K and ～150 K, which is slightly modified by remanent tensile stresses in the case of nanoparticles in the matrix. The subsequent coating of the bare particles by silica produced no further change in hyperfine parameters, which indicates that this procedure does not modify magnetic properties of nanoparticles.     

Double-layer capacitance of waste coffee ground activated carbons in an organic electrolyte

Using ZnCl₂ activation we prepared a series of carbon electrodes from waste coffee grounds to study the effect of mesopores on double-layer capacitance in a tetraethyl ammonium tetrafluoroborate/acetonitrile electrolyte. The activated carbon with the largest mesopore volume achieved an energy density of 34 Wh kg^?1 at low current loads, and significantly retained an energy density of 16.5 Wh kg^?1 and specific capacitance of more than 100 F g^?1 at fast charge–discharge rates (20 A g^?1). The effect of mesopores on capacitance at fast charge–discharge rates is discussed.