Fast Multi‐residue Screening for 84 Pesticides in Tea by Gas Chromatography with Dual‐tower Auto‐sampler,Dual‐column and Dual Detectors

A fast multi‐residue screening method for determining pesticides in tea is described. Pesticides are extracted from tea with acetone and methylene chloride, then enriched and cleaned up with solid phase extraction (SPE) prior to gas chromatographic determination. The fast screening is achieved by a gas chromatograph system equipped with dual‐column, dual‐tower auto‐sampler and both electron capture detector (ECD) and flame photometric detector (FPD). Optimal conditions are investigated for the prospective pesticides including column selection, detection mode, the retention behaviors, quantitative calibration, as well as the recoveries and repeatability of pesticides from tea samples. Under the optimal conditions, with the FPD‐P detector accompanied CP‐SIL 13CB column, 48 pesticides can be separated well and detected within 38 min; and with a DB‐5 column, 35 ECD‐detectable pesticides can be separated and detected within 46 min. The recoveries of 84 pesticides in tea samples are 65–120% with 0.34–16% RSD for spiking 0.02–3.0 mg/kg standard species. Because of the thermal instability of most pesticides, direct cold extraction of pesticides from a tea sample is recommended. The proposed method provided a very fast and efficient procedure to screen 84 pesticides from a complicated tea sample matrix.     

Beilschmiedic Acids F and G,Further Endiandric Acid Derivatives from Beilschmiedia anacardioides

Two new endiandric acid derivatives, beilschmiedic acid F ( 1 ) and beilschmiedic acid G ( 2 ), together with three known constituents, beilschmiedic acid A, beilschmiedic acid C, and sitosterol 3‐β‐D ‐glucopyranoside, were isolated from the stem bark of Beilschmiedia anacardioides. Their structures were elucidated mainly by using a combination of 1D‐ and 2D‐NMR techniques. The structure and relative configuration of beilschmiedic acid G ( 2 ) was also confirmed by X‐ray crystallographic analysis.     

Carapolide A,A novel hexanortriterpenoid and carapolides b and c,novel tetranortriterpenoids from the seeds of carapaprocera (meliaceae)

Carapolide A, a novel hexanortriterpenoid, and carapolides B and C, novel tetranortriterpenoids have been isolated from the seeds of $\text{Carapa}$$\text{procera}$ and have been assigned structures (2), (10) and (11) respectively on the basis of chemical and spectroscopic evidence.     

The Mesomeric Effect of Thiazolium on non‐Kekulé Diradicals in Pichia stipitis Transketolase

It is theoretically plausible that thiazolium mesomerizes to congeners other than carbene in a low effective dielectric binding site; especially given the energetics and uneven electronegativity of carbene groups. However, such a phenomenon has never been reported. Nine crystal structures of transketolase obtained from Pichia stipitis (TKps) are reported with subatomic resolution, where thiazolium displays an extraordinary ring‐bending effect. The bent thiazolium congeners correlate with non‐Kekulé diradicals because there is no gain or loss of electrons. In conjunction with biophysical and biochemical analyses, it is concluded that ring bending is a result of tautomerization of thiazolium with its non‐ Kekulé diradicals, exclusively in the binding site of TKps. The chemophysical properties of these thiazolium mesomers may account for the great variety of reactivities carried out by thiamine–diphosphate‐containing (ThDP) enzymes. The stability of ThDP in living systems can be regulated by the levels of substrates, and hydration and dehydration, as well as diradical‐mediated oxidative degradation.     

Biosurface engineering through ink jet printing

The feasibility of thermal ink jet printing as a robust process for biosurface engineering was demonstrated. The strategy investigated was to reconstruct a commercial printer and take advantage of its colour management interface. High printing resolution was achieved by formulating bio-inks of viscosity and surface tension similar to those of commercial inks. Protein and enzyme denaturation during thermal ink jet printing was shown to be insignificant. This is because the time spent by the biomolecules in the heating zone of the printer is negligible; in addition, the air and substrate of high heat capacity absorb any residual heat from the droplet.Gradients of trophic/tropic factors can serve as driving force for cell growth or migration for tissue regeneration. Concentration gradients of proteins were printed on scaffolds to show the capability of ink jet printing. The printed proteins did not desorb upon prolonged immersion in aqueous solutions, thus allowing printed scaffold to be used under in vitro and in vivo conditions. Our group portrait was ink jet printed with a protein on paper, illustrating that complex biopatterns can be printed on large area. Finally, patterns of enzymes were ink jet printed within the detection and reaction zones of a paper diagnostic.     

Carapolides d,e and f,novel tetranortriterpenoids from the seeds of carapagrandiflora (meliaceae)

Carapolides d and e, two new ring b cleaved tetranortriterpenoids, and carapolide f, a novel tetranortriterpenoid spirolactone, have been isolated from the seeds of $\text{carapa grandiflora}$ and have been assigned structures (1), (3) and (6) on the basis of their ¹H and ¹³C spectroscopic properties.     

On‐line microdialysis coupled solid‐phase extraction to decrease matrix interference in the HPLC analysis of urinary ketamine and its metabolites

A microdialysis sampling (MDS) on‐line SPE (MDS/SPE) has been applied to redeem the detection after dilution to decrease matrix interference in the analysis of ketamine (K) and its two main metabolites, norketamine (NK) and dehydronorketamine (DHNK) in urine by HPLC. After being filtrated, diluted and adjusting the pH, K and its metabolites in the diluted sample solution were collected through MDS and then trapped on an on‐line SPE for HPLC analysis. The optimal conditions for MDS/SPE were investigated and then applied to real sample analysis. Experimental results indicated that the MDS/SPE by using regenerated cellulose hollow fiber (8‐cm length) and 1 mM sulfuric acid as the perfusate at 20 μL/min flow‐rate to collect analytes from 100‐fold diluted urine sample (20 mL at pH 6.0), and then having been trapped in octadecyl‐modified silica phase SPE for 30 min, offered the optimum efficiency. The concentration levels of 41, 42 and 28% (m/m) for K, NK and DHNK, respectively, in urine were redeemed for determination. The detection limits were 0.38, 0.33 and 0.34 ng/mL (in 100‐fold diluted sample) for K, NK and DHNK, respectively. The method provides a very simple, inexpensive and eco‐friendly procedure to determine K, NK and DHNK in urine.     

Molecular Structure of Amyloid Fibrils Formed by Residues 127 to 147 of the Human Prion Protein

Amyloid fibrils are filamentous and insoluble forms of peptides or proteins. Proline has long been considered to be incompatible with the cross‐β structural motif of amyloid fibrils. On the basis of solid‐state NMR spectroscopy data, we present a structural model of an in‐register parallel β sheet for the amyloid fibrils formed from a human prion protein fragment, huPrP_127–47. We have developed a simple solid‐state NMR spectroscopy technique to identify solvent‐protected backbone amide protons in a H/D exchange experiment without disaggregating the amyloid fibrils, from which we find that proline residue P₁₃₇ does not disrupt the β‐sheet structure from G₁₂₇ to G₁₄₂. We suggest that the resultant kink at P₁₃₇ generates a twist between adjacent peptide strands to maintain hydrogen bonding in the β‐sheet regions flanking the P₁₃₇ residue. Although proline can be well integrated into the cross‐β structure of amyloid fibrils, the kink formed at the position of the proline residue will considerably weaken the hydrogen bonding between the neighboring strands, especially when the mutation site is near the central region of a β sheet.     

Determination of lead in preserved egg by flame atomic absorption spectrometry after chemically modified preconcentration

A sensitive method for the determination of lead in preserved egg by flame absorption spectrometry using ammonium pyrrolidine dithiocarbamate-polystyrene chemically modified platinum wire matrix is presented. The modified platinum wire matrix, after preconcentrating the lead, is placed in a flame burner for direct atomization and measurement. The concentration range is linear between 5 and 500 ng/ml lead in solution and the detection limit is 0.65 ng/ml. This new technique is sensitive and convenient.