Activated carbon derived from tree bark biomass with promising material properties for supercapacitors

Journal of Solid State Electrochemistry - Activated carbon from tree bark (ACB) has been synthesized by a facile and environmentally friendly activation and carbonization process at different...     

Functionalized graphene foam as electrode for improved electrochemical storage

We report on a non-covalent functionalization of graphene foam (GF) synthesized via chemical vapour deposition (CVD). The GF was treated with pyrene carboxylic acid (PCA) which acted as a source of oxygen and/or hydroxyl groups attached to the surface of the graphene foam for its electrochemical performance improvement. The modified graphene surface enabled a high pseudocapacitive effect on the GF. A specific capacitance of 133.3 F g^?1, power density ～ 145.3 kW kg^?1 and energy density ～ 4.7 W h kg^?1 were achieved based on the functionalized foam in 6 M KOH aqueous electrolyte. The results suggest that non-covalent functionalization might be an effective approach to overcome the restacking problem associated with graphene electrodes and also signify the importance of surface functionalities in graphene-based electrode materials.     

Raman analysis of bilayer graphene film prepared on commercial Cu(0.5 at% Ni) foil

This study reports the Raman analysis of bilayer graphene films prepared on commercial dilute Cu(0.5 at% Ni) foils using atmospheric pressure chemical vapor deposition. A bilayer graphene film obtained on Cu foil is known to have small areas of bilayer (islands) with a significant fraction of non‐Bernal stacking, while that obtained on Cu/Ni is known to grow over a large area with Bernal stacking. In the Raman optical microscope images, a wafer‐scale monolayer and large‐area bilayer graphene films were distinguished and confirmed with Raman spectra intensities ratios of 2D to G peaks. The large‐area part of bilayer graphene film obtained was assisted by Ni surface segregation because Ni has higher methane decomposition rate and carbon solubility compared with Cu. The Raman data suggest a Bernal stacking order in the prepared bilayer graphene film. A four‐point probe sheet resistance of graphene films confirmed a bilayer graphene film sheet resistance distinguished from that of monolayer graphene. A relatively higher Ni surface concentration in Cu(0.5 at% Ni) foil was confirmed with time‐of‐flight secondary ion mass spectrometry. The inhomogeneous distribution of Ni in a foil and the diverse crystallographic surface of a foil (confirmed with proton‐induced X‐ray emission and electron backscatter diffraction, respectively) could be a reason for incomplete wafer‐scale bilayer graphene film. The Ni surface segregation in dilute Cu(0.5 at% Ni) foil has a potential to impact on atmospheric pressure chemical vapor deposition growth of large‐area bilayer graphene film. Copyright © 2015 John Wiley & Sons, Ltd.     

Synthesis and electrochemical investigation of spinel cobalt ferrite magnetic nanoparticles for supercapacitor application

Cobalt ferrite magnetic nanoparticles (CoFe₂O₄-MNPs) were synthesized by hydrothermal and co-precipitation methods using different precursors such as nitrates, chlorides, and acetates, at different concentrations with/without surfactant under different growth conditions. The structural and morphological analyses reveal the formation of a single-phase CoFe₂O₄ in nanoplatelet-shaped NPs with average particle size between 11 and 26 nm depending on synthesis condition. The specific surface area of these NPs obtained by hydrothermal method was ~ 34 m² g^?1. Electrochemical performances of the obtained nanoparticles in a three-electrode configuration with a 6 M KOH electrolyte revealed a specific capacitance (C _s) of 429 F/g at 0.5 A/g, with excellent capacitance retention of 98.8% after 6000 cycles at 10 A/g for the electro-active NPs synthesized by hydrothermal method at 200 °C for 18 h.     

Photoluminescence study of aligned ZnO nanorods grown using chemical bath deposition

The photoluminescence study of self-assembled ZnO nanorods grown on a pre-treated Si substrate by a simple chemical bath deposition method at a temperature of 80 °C is hereby reported. By annealing in O₂ environment the UV emission is enhanced with diminishing deep level emission suggesting that most of the deep level emission is due to oxygen vacancies. The photoluminescence was investigated from 10 K to room temperature. The low temperature photoluminescence spectrum is dominated by donor-bound exciton. The activation energy and binding energy of shallow donors giving rise to bound exciton emission were calculated to be around 13.2 meV, 46 meV, respectively. Depending on these energy values and nature of growth environment, hydrogen is suggested to be the possible contaminating element acting as a donor.