Evaluation of the performance of a soft X-ray charger for the bipolar charging of nanoparticles

The use of soft X-rays in a neutrahzer represents an alternative technique that could replace conventional radioactive sources.In this study,we evaluated the charging characteristics of a soft X-ray aerosol neutralize!".In addition,the results from the evaluation of the soft X-ray charger were compared with results obtained using a neutralizer incorporating an ²⁴¹Am radioactive source.The tandem differential mobility analyzer technique was used previously to determine the size-dependent positive,negative,and neutral charge fractions of a soft X-ray neutralizer.This technique was used to show that the neutral fractions obtained using the soft X-ray charger agreed well with the predictions of bipolar diffusion charging theory,and that the soft X-ray charger could be used as a neutralizer for a scanning mobility particle sizer system.     

Higher Fock Sectors in the Wick-Cutkosky Model

In the Wick-Cutkosky model we analyze nonperturbatively, in light-front dynamics, the contributions of two-body and higher Fock sectors to the total norm and electromagnetic form factor. It turns out that two- and three-body sectors always dominate. For a maximal value of the coupling constant α = 2π, corresponding to the zero bound-state mass M = 0, they contribute 90% to the norm. With decrease of α the two-body contribution increases up to 100%. The form factor asymptotic is always determined by a two-body sector.     

Proof of semialgebraic covering mapping cylinder conjecture with semialgebraic covering homotopy theorem

In this paper we prove the semialgebraic version of Palais' covering homotopy theorem, and use this to prove Bredon's covering mapping cylinder conjecture positively in the semialgebraic category. Bredon's conjecture was originally stated in the topological category, and a topological version of our semialgebraic proof of the conjecture answers the original topological conjecture for topological G-spaces over “simplicial” mapping cylinders.     

Role of copper chloride on the surface of activated carbon in adsorption of methyl mercaptan

In this paper, adsorption characteristics of methyl mercaptan on virgin activated carbon and copper chloride impregnated activated carbons were studied by using a dynamic adsorption method in a fixed bed. The activated carbons were characterized by nitrogen adsorption, XRD, TGA and solubility tests. The impregnation of copper chloride on the activated carbon significantly enhanced the adsorption capacity of methyl mercaptan, despite a notable decrease in microporosity. It is likely that copper chloride may act as adsorption site for methyl mercaptan. Copper chloride on the activated carbon in a range of 3-20 wt% Cu content was present mostly in the amorphous form of CuCl(2), according to the results of the solubility, XRD and TGA tests. Starting at 10 wt% in Cu loading, the adsorption capacity for methyl mercaptan decreases gradually. It is likely that a decrease in the degree of copper chloride dispersion and an accessibility of small pores may lead to the decrease in the adsorption capacity of the activated carbon for methyl mercaptan.     

Phase separation behavior of epoxy resin modified with crosslinked rubber

Low molecular weight liquid rubber (ATBN = amine terminated butadiene acrylonitrile copolymer or CTBN = carboxyl terminated butadiene acrylonitrile copolymer)–DGEBA (diglycidyl ether of bisphenol A) blends indicated upper critical solution temperature (UCST) behavior. The phase separation behavior of the neat and crosslinked rubber (ATBN, CTBN)–epoxy blends was analyzed by a laser light scattering experiment. Lauryl peroxide (LPO) was employed to crosslink the rubber during the initial annealing stage. The onset point of the phase separation in the crosslinked ATBN–epoxy system occurred later than in the case of the neat ATBN–epoxy system. However, the onset point of the phase separation process started earlier in the case of the crosslinked CTBN–epoxy system. The domain correlation length of the crosslinked rubber-added system was smaller than that of the neat rubber-added system.     

Design of molecular two-photon probes for in vivo imaging. 2H-Benzo[h]chromene-2-one derivatives

2H-Benzo[h]chromene-2-one derivatives showing appreciable water solubility, significant two-photon cross sections, high photostability, cell permeability, low toxicity, and ability to be converted to a protein TP probe have been developed by incorporating all of the needed functions within a small molecule.     

Modulation of the electronic structure of semiconducting nanotubes resulting from different metal contacts

Examined in this paper is the role of the metal electrode influencing the structure and electronic properties of semiconducting carbon nanotubes near the interface at low bias. Specifically, we present quantum-chemical calculations of finite sections of a (8,0) semiconducting single wall nanotube contacted with gold and palladium clusters. The calculations at the density functional level of theory, which included full geometry optimizations, indicate the formation of bonds between the metal atoms of the electrode and the carbon atoms of the nanotube. The local work function of the metal electrode can be expected to exhibit significant variations as a result of this bond formation. Compared to the gold-contacted nanotubes, the palladium-contacted nanotubes have a small but interesting increase in both length and diameter. The highest occupied molecular orbital (HOMO) and lowest unoccupied molecular orbital (LUMO) of the gold-contacted nanotube are shown localized at the edges. In contrast, the HOMO and LUMO of the palladium-contacted nanotube are extended over the entire nanotube and the metal cluster contacted to it, providing thereby a better conduction path in the contact region of the electrode and the nanotube. The involvement of the highly directional d orbitals in the interactions involving the palladium cluster leads to an enhanced pi electron density in the nanotube. This enhanced pi electron density is synonymous with an improved electron transmission.     

A Surfactant Bridge Model for the Nonlinear Electrorheological Effects of Surfactant-Activated ER Suspensions

In surfactant-activated electrorheological (ER) suspensions it is observed that the ER response shows linear ER behavior (F~E(2)) at small surfactant concentrations and nonlinear ER behavior (F~E(n), n approximately 1) at large surfactant concentrations. Here, a surfactant bridge model is developed to explain the nonlinear ER behavior of surfactant-activated ER suspensions. The model shows that the formation and size of a surfactant bridge depend on various variables, especially the electric field strength, the surfactant surface tension, and the initially adsorbed amount of surfactants on particles. The predicted dependence of the formation and size of a surfactant bridge on the electric field strength and the initially adsorbed amount of surfactants is consistent with the observations. Also, the model indicates that there is a critical minimum electric field E(crit) for the formation of a surfactant bridge, and the estimated E(crit) shows good agreement with the observations. The force acting between particles is composed of the electrostatic force and force associated with surface tension. However, it is found that the contribution of the force associated with surface tension can be ignored and the electrostatic force is dominant regardless of the formation of surfactant bridges between particles. When surfactant bridges are formed between particles, the predicted force shows nonlinear ER behavior (F~E(n), n approximately 1), consistent with the observed nonlinear ER behavior at large surfactant concentrations. When no surfactant bridge is formed, the predicted force is proportional to the electric field squared (F~E(2)), consistent with the interfacial polarization. The model can successfully predict the nonlinear ER behavior at large surfactant concentrations, confirming that the nonlinear ER behavior of surfactant-activated ER suspensions arises from the observed formation of surfactant bridges between particles. Copyright 2001 Academic Press.     

Action on flag varieties: 2-Dimensional case

LetA be a finite dimensional commutative semisimple algebra over a fieldk and letV be a finitely generatedA-module. We examine the action of the general linear group GL _A (V) on the set of flags ofk-subspaces ofV. Also, let (V, B) be a finitely generated symplectic module overA. We also investigate the action of the symplectic group Sp _A (V, B) on the set of flags ofB-isotropick-subspaces ofV, whereB=°B is thek-symplectic form induced by a nonzerok-linear map :A k. In both cases, the orbits are completely classified in terms of certain integer invariants provided that dim _{k A}=2.This work is partially supported by a KOSEF research grant.     

Application of ionic liquid halide nucleophilicity for the cleavage of ethers: a green protocol for the regeneration of phenols from ethers

We have used the high nucleophilicity of bromide ion in the form of the ionic liquid, 1-n-butyl-3-methylimidazolium bromide ([bmim][Br]), for the nucleophilic displacement of an alkyl group to regenerate a phenol from the corresponding aryl alkyl ether. Using 2-methoxynaphthalene (1) as a model compound, we found that the combination of ionic liquid [bmim][Br] and p-toluenesulfonic acid with warming effected demethylation in 14 h, affording the desired product 2-naphthol (2) in good yield (97%). Various other protic acids (MsOH, hydrochloric acid (35%), dilute sulfuric acid (50%)) could be used as a proton source in this demethylation reaction. Under the same conditions, cleavage of alkyl alkyl ether 2-(3-methoxypropyl)naphthalene yielded mixture of corresponding 2-(3-bromopropyl)naphthalene and 2-(3-hydroxypropyl)naphthalene. Dealkylation of various aryl alkyl ethers could also be achieved using significantly reduced (i.e., stoichiometric) amounts of concentrated hydrobromic acid (47%) in the ionic liquid. Both procedures afforded the desired products in moderate to good yield; however, cleavage of aryl alkyl cyclic ether, 2,3-dihydrobenzofuran, resulted in low yield of the desired product o-2-bromoethylphenol. The convenience of this method for ether cleavage and its effectiveness using only a moderate excess of hydrobromic acid make it attractive as a green chemical method.