Microbial products. II. Granaticinic acid,a new antibiotic from a thermophilic streptomycete

Streptomyces sp. XT-11989 produces a mixture of two antibiotics with litmus-like indicator properties. One of them was shown to be identical with granaticin, the other was identified as [1S,3S,4S,7R,9R,10S,13R]-4,7,9,10-tetrahydro-5,12-dioxo-4, 6,10,11,13-pentahydroxy-1,9-dimethyl-(1H,3H)-7,10-ethanonaphtho[2,3-c: 6,7-c]dipyran-3-acetic acid and termed granaticinic acid. Microbial production and nuclear magnetic resonance data of these antibiotics are discussed and the antibacterial properties of the antibiotics are compared.

---

Mikrobielle produkte. II. Granaticinsäure, ein neues Antibiotikum von einem thermophilen Streptomyceten

Zusammenfassung Der Streptomycetenstamm XT-11989 produziert eine Mischung von zwei Antibiotika mit Lakmus-ähnlichen Indikatoreigenschaften. Eines dieser Antibiotika erwies sich als Granaticin, das andere wurde als [1S,3S,4S,7R,9R,10S,13R]-4,7,9,10-tetrahydro-5,12-dioxo-4,6,10,11,13-pentahydroxy-1,9-dimethyl-(1H,3H)-7,10-ethanonaphto[2,3-c: 6,7-c]dipyran-3-essigsäure identifiziert und Granaticinsäure benannt. Mikrobiologische Produktion und Kernresonanzdaten dieser antibiotika werden besprochen und ihre antibakteriellen Eigenschaften verglichen.

     

Synthesis of New Brassinosteroid 24-Norcholane Type Analogs Conjugated in C-3 with Benzoate Groups

The metabolism of brassinosteroid leads to structural modifications in the ring skeleton or the side alkyl chain. The esterification and glycosylation at C-3 are the most common metabolic pathways, and it has been suggested that conjugate brassinosteroids are less active or inactive. In this way, plants regulate the content of active brassinosteroids. In this work, the synthesis of brassinosteroid 24-norcholane type analogs conjugated at C-3 with benzoate groups, carrying electron donor and electron attractant substituents on the aromatic ring, is described. Additionally, their growth-promoting activities were evaluated using the Rice Lamina Inclination Test (RLIT) and compared with that exhibited by brassinolide (used as positive control) and non-conjugated analogs. The results indicate that at the lowest tested concentrations (10⁻⁸–10⁻⁷ M), all analogs conjugated at C-3 exhibit similar or higher activities than brassinolide, and the diasteroisomers with S configuration at C-22 are the more active ones. Increasing concentration (10⁻⁶ M) reduces the biological activities of analogs as compared to brassinolide.     

EPR Studies of Tl0.5Pb0.5Sr1.6Ba0.4CaCu2?xRuxO7?δ Superconductor

Bulk superconducting samples of type Tl_0.5Pb_0.5Sr_1.6Ba_0.4CaCu_2−x Ru _x O_7−δ, (Tl, Pb)/Sr-1212, with 0.0 ≤ x ≤ 0.525 were prepared by the conventional one-step solid-state reaction technique. The prepared samples were investigated using X-ray powder diffraction, electrical resistivity and electron paramagnetic resonance (EPR) measurements. Enhancement of the phase formation, superconducting transition temperature T _c and hole carriers concentration P was observed up to x = 0.075. For x > 0.075, a reverse trend was observed. EPR spectra were measured at different temperatures (120–290 K) for all prepared samples. The number of spins N participating in the resonance and the paramagnetic susceptibility χ were calculated as a function of both Ru-content and temperature. N and χ increased as the Ru-content increased. A linear relationship between logN and 1/T was established, from which the activation energy E _a was calculated as a function of the Ru-content. The temperature dependence of χ was fitted according to Curie–Weiss type of magnetic behavior. Curie constant C, Curie temperature θ, the effective magnetic moment μ and the electronic specific heat γ were estimated as a function of the Ru-content.     

Irreducibility of Toeplitz C⋆-algebras

We probe the irreducibility of the Toeplitz C^*-algebras generated by Toeplitz operators on Bergman and Hardy spaces associated with generalized upper half-planes in several complex variables.     

Tangible convex bodies. Appendix to “Multivariable Wiener-Hopf Operators I”

Study in a local geometry of non-smooth convex bodies via their supporting cones. The supporting cones are differential objects if the convex bodies are tangible. Examples of completely tangible and non-tangible convex bodies are presented.     

A surface fit approach with a disposable optical tongue for alkaline ion analysis

A disposable optical tongue for the alkaline ions Na(I) and K(I) is described. The two-sensor layout prepared on a transparent support consists of non-specific polymeric membranes working by ionophore-chromoionophore chemistry. The non-specific behavior of the membranes was controlled by means of the crown ether-type ionophore present. The imaging of the tongue, after reaction for 3 min with the unknown solution, by means of a conventional flatbed scanner working by transmission mode, makes it possible to calculate the H (hue) value of the hue, saturation, value (HSV) color space used as a robust and precise analytical parameter. The modelling of the response of the two-sensor tongue as a sigmoidal surface is used to characterize the behavior of the tongue and as a basis to infer the concentration values. To compute the concentration of two analytes from the two hue values obtained using the optical tongue, a surface fit approach was used. The tongue works over a wide dynamic range (1.0×10(-4)-0.1 M both in Na(I) and K(I)). The sensing membranes show good intramembrane (1.4% RSD) and intermembrane precision (0.71% RSD) and lifetime (around 45 days in darkness). The procedure was used to analyze Na(I) and K(I) in different types of natural waters (tap and mineral), validating the results against a reference procedure.     

Effect of IR laser radiation on the structure and optical properties of PC-PBT/Pd polymer nanocomposite films

ABSTRACT

Bayfol (PC-PBT blend ?lm) is a class of polymeric solid-state nuclear track detector which has a lot of applications in several radiation detection ?elds. It is a bisphenol-A polycarbonate PC blended with polybutylene terephthalate PBT. Bayfol/Palladium (PC-PBT/Pd) nanocomposite films have been deposited using the molding technique. It is worth mentioning that this report is almost the first one dealing with the topic of the changes of physical properties of Bayfol/Pd nanocomposite due to laser exposure. Samples from PC-PBT/Pd (5?wt%) nanocomposite were exposed to IR-pulsed laser of 5-W power, capable of producing 2000 pulses per second with pulse duration of 200?ns at 904?nm. The laser fluences were in the range 2–25?J/cm². The resultant modi?cations in the exposed nanocomposite samples have been studied as a function of fluence using different characterization techniques such as X-ray diffraction (XRD), UV spectroscopy and color difference studies. The results indicate the proper dispersion of Pd nanoparticles in the PC-PBT matrix that causes a strong intermolecular interaction between Pd and PC-PBT, resulted in an increase in refractive index and the amorphous phase. Also, it is found that the laser exposure reduces the optical energy gap that could be attributed to the increase in structural disorder of the exposed PC-PBT/Pd nanocomposites due to crosslinking. Further, the color intensity ΔE, which is the color difference between the exposed samples and the non-exposed one, was increased with increasing the laser fluence, convoyed by a significant increase in the green and yellow color components.     

Static fatigue lifetime of optical fibers in bending

An experimental program aimed at defining the effects of applied stress, temperature, humidity, and buffer coating on the static fatigue behavior of optical fibers in bending configurations is in progress. Data are presented below which demonstrate that the static fatigue behavior of fiber is strongly dependent on the polymeric buffer coating. Furthermore, the effect of humidity is readily evident by the comparison of times to failure at 30% RH and in water immersion. The ultimate objective of this research is to determine an allowable bend radius for fiber optic cable which is based on measurements of both static fatigue and strength in bending and which will assure reliable performance of the fiber over the design lifetime.