Phase diagrams of nonionic foam films: new interpretation of disjoining pressure vs thickness curves

Recently we constructed phase diagrams for thin foam films stabilized by a nonionic surfactant. The idea was born by synopsis of various disjoining pressure (pi) versus thickness (h) curves of foam films resembling p-Vm isotherms of real gases. The new concept of interpreting the pi-h curves of foam films in terms of phase diagrams allows us to describe experimental observations much more precisely. Three logical consequences will be discussed here to illustrate the strength of this approach. First, the observation is explained that common black films (CBF) rupture or form a Newton black film (NBF) within a certain pressure range rather than at a defined pressure. Both observations can be rationalized by invoking a nucleation process of holes or of the thinner NBF, respectively, in close analogy to the vapor to liquid condensation. Second, the question whether the CBF to NBF transition is discrete or continuous is answered by analyzing under which conditions the supercritical state of a foam film can be reached. Third, the evidence of corresponding states is discussed.     

Mixtures of branched non-ionic oligo-oxyethylene surfactants in aqueous solutions — the effect of molecular geometry on LC phase behaviour 4

The LC phase behavior of ternary mixtures of the two corresponding branched non-ionic surfactants 1,3-bis-(methoxy-tetraoxyethylene)-2-propoxy-tetradecane (Y-surfactant) and 1,3-bis-(heptyloxy)-2-propoxyoctaoxyethylene mono-methyl ether (V-surfactant) and water were studied by polarizing microscopy. The two branched surfactants, which have different molecular geometries but nearly the same hydrophilic-lipophilic volume ratio, exhibit extremely different phase behavior in binary surfactant/water systems. For the ternary mixtures of Y- and V-surfactant and water we found-according to established packing models-a continuous stabilization of the cubic and hexagonal phases and a destabilization of the lamellar phase with increasing amount of Y-surfactant. On the other hand, we observed a thermal stabilization of the lamellar phase. The maximal transition temperatures of the lamellar phase pass a maximum with increasing amount of Y-surfactant.     

Alkylsulfamoyl Chlorides as Key Units in the Synthesis of Novel Biologically Active Compounds for Crop Protection

Due to their bifunctional character, alkylsulfamoyl chlorides are versatile units for the synthesis of heterocycles, polar sulfamates, and sulfonamides. In the last decade, synthetic methods of general preparative use have been developed, by means of which amine hydrochlorides, isocyanates, aziridines or tertiary alcohols can be reacted with suitable sulfuric acid derivatives to give novel, variously substituted alkylsulfamoyl chlorides. These compounds can subsequently be converted either to previously unobtainable N-alkoxyalkyl-N-alkylsulfamoyl chlorides or to novel heterocycles of the type 1H-2,1,3-benzothiadiazin-4-one-2,2-dioxide, 2H-1,2,6-thiadia-zin-3-one-1,1-dioxide and 2H-1,2,4,6-thiatriazin-5-one-1,1-dioxide; these compounds are examples of interesting models which illustrate the relation between the structure and the action of the compound, and in some cases lead to highly selective, ecologically unobjectionable herbicides. On the other hand, the alkylsulfamoyl chlorides themselves can be N-acylated to give further 3- to 5-atom bifunctional synthesis units, with which novel heterocyclic syntheses can be carried out. Further uses of the alkylsulfamoyl chlorides include the preparation of biologically active sulfamates, and cycloaddition reactions of N-sulfonylamines prepared in situ.     

Influence of amphiphilic block copolymers on lyotropic liquid crystals in water-oil-surfactant systems

In ternary water-oil-nonionic alkyl polyglycol ether (C(i)E(j)) microemulsions, an increase in efficiency is always accompanied by the formation of a lamellar (L(alpha)) phase. The addition of an amphiphilic block copolymer to the ternary base system increases the efficiency of the microemulsion drastically while suppressing--at least partly--the formation of the L(alpha) phase. However, amphiphilic block copolymers can be used not only to suppress the formation of lyotropic liquid crystals but also for the opposite effect, namely, to induce their formation. To understand to what extent the increase in efficiency is accompanied by the formation of lyotropic liquid crystals, we studied phase diagrams of water-n-alkane-n-alkyl polyglycol ethers (C(i)E(j))-PEPX-PEOY at a constant volume fraction of oil in the water/oil mixture. Using polymers of the poly(ethylene propylene)-copoly(ethylene oxide) type, with M(PEP) = X kg mol(-1) and M(PEO) = Y kg mol(-1), we determined phase diagrams as a function of the polymer concentration, size, and symmetry. Moreover, the influence of a particular polymer mixture was studied, which turned out to be the best system if both a high efficiency and a low tendency to form an L(alpha) phase are needed.     

Identification of lipophilic bioproduct portfolio from bioreactor samples of extreme halophilic archaea with HPLC-MS/MS

Extreme halophilic archaea are a yet unexploited source of natural carotenoids. At elevated salinities, however, material corrosivity issues occur and the performance of analytical methods is strongly affected. The goal of this study was to develop a method for identification and downstream processing of potentially valuable bioproducts produced by archaea. To circumvent extreme salinities during analysis, a direct sample preparation method was established to selectively extract both the polar and the nonpolar lipid contents of extreme halophiles with hexane, acetone and the mixture of MeOH/MTBE/water, respectively. Halogenated solvents, as used in conventional extraction methods, were omitted because of environmental considerations and potential process scale-up. The HPLC-MS/MS method using atmospheric pressure chemical ionization was developed and tuned with three commercially available C₄₀ carotenoid standards, covering the wide polarity range of natural carotenoids, containing different number of OH-groups. The chromatographic separation was achieved on a C₃₀ RP-HPLC column with a MeOH/MTBE/water gradient. Polar lipids, the geometric isomers of the C₅₀ carotenoid bacterioruberin, and vitamin MK-8 were the most valuable products found in bioreactor samples. In contrast to literature on shake flask cultivations, no anhydrous analogues of bacterioruberin, as by-products of the carotenoid biosynthesis, were detected in bioreactor samples. This study demonstrates the importance of sample preparation and the applicability of HPLC-MS/MS methods on real samples from extreme halophilic strains. Furthermore, from a biotechnological point-of-view, this study would like to reveal the relevance of using controlled and defined bioreactor cultivations instead of shake flask cultures in the early stage of potential bioproduct profiling.     

Growth of silicon nanowires on UV-structurable glass using self-organized nucleation centres

We report on the growth of silicon nanowires on photostructurable glass by low-pressure chemical vapour deposition. Thereby, no additional catalyst was needed to stimulate the growth process. Instead, a self-organized crystallization process leads to the formation of metallic clusters and seed crystals within the glass, which are supposed to initialize the nanowire growth. The nanowires were contacted by direct deposition of Pt using a focussed ion beam system and characterized electrically.