Thiol–norbornene materials: Approaches to develop high Tg thiol–ene polymers

The ability to prepare high T_g low shrinkage thiol–ene materials is attractive for applications such as coatings and dental restoratives. However, thiol and nonacrylated vinyl materials typically consist of a flexible backbone, limiting the utility of these polymers. Hence, it is of importance to synthesize and investigate thiol and vinyl materials of varying backbone chemistry and stiffness. Here, we investigate the effect of backbone chemistry and functionality of norbornene resins on polymerization kinetics and glass transition temperature (T_g) for several thiol–norbornene materials. Results indicate that T_gs as high as 94 °C are achievable in thiol–norbornene resins of appropriately controlled chemistry. Furthermore, both the backbone chemistry and the norbornene moiety are important factors in the development of high T_g materials. In particular, as much as a 70 °C increase in T_g was observed in a norbornene–thiol specimen when compared with a sample prepared using allyl ether monomer of analogous backbone chemistry. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 5686–5696, 2007     

Oxygen inhibition in thiol–acrylate photopolymerizations

The overall effects of oxygen on thiol–acrylate photopolymerizations were characterized. Specially, the choice of thiol monomer chemistry, functionality, and concentration on the extent of oxygen inhibition were considered. As thiol concentration was increased, the degree of oxygen inhibition was greatly reduced because of chain transfer from the peroxy radical to the thiol. When comparing the copolymerization of 1,6‐hexanediol diacrylate with the alkane‐based thiol (1,6‐hexane dithiol) to the copolymerization with the propionate thiol (glycol dimercaptopropionate), it was found that the propionate system was much more reactive and polymerized to a greater extent in the presence of oxygen. In addition, the functionality was considered where the glycol dimercaptopropionate was compared to a tetrafunctional propionate of similar chemistry (pentaerythritol tetrakis(mercaptopropionate)). Given the same thiol concentration, the higher functionality thiol imparted a faster polymerization rate, due to the increased polymer system viscosity, which limited oxygen diffusion and decreased the extent of overall oxygen inhibition. Thus, preliminary insight is provided into how thiol monomer choice affects the extent of oxygen inhibition in thiol–acrylate photopolymerization. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 2007–2014, 2006     

INTERACTION OF ENZYME-GENERATED SPECIES WITH CHLOROPHYLL-a AND PROBES BOUND TO SERUM ALBUMINS

Abstract— The interaction of serum albumin-bound acceptors with enzyme-generated and protected triplet species was studied in two types of systems. Chlorophyll-a bound to bovine and human serum albumins is efficiently excited by enzymatically generated triplet acetone and acetaldehyde. When the Chl-a concentration is much lower than that of the albumin the interaction occurs with chlorophyll in an aggregate in which one Chl-a is surrounded by several protein molecules. When the Chl-a concentration is higher than that of the protein, the aggregate contains the proteins and fluorescent chlorophylls in a 1:1 ratio. The excess chlorophylls, although able to interact with the donors, are not fluorescent.
In another study, probes bound to various specific sites of serum albumins were used as quenchers of the enzymatically generated triplet acetone. The efficiency of quenching by all the bound probes is equal and in one case even stronger than for the free probes.
A model for the interaction of the excited species contained in the enzyme with the acceptor(s) located in the protein is proposed.
The present results provide further evidence that enzyme-generated and protected triplet carbonyl species can interact through a collisional process with acceptors bound to or constituents of macromolecules.     

Uranium-sulfilimine chemistry. The preparation of Cp2*UCl2(HNSPh2) and its hydrolysis with HNSPh2 · H2O

The reaction of Cp₂*UCl₂ with HNSPh₂ produces Cp₂*UCl₂(HNSPh₂), which is the first structurally characterized complex of a sulfilimine. The hydrolysis of Cp₂*UCl₂(HNSPh₂) with HNSPh₂ · H₂O yields a tetrauranium cluster whose heavy atom structure has been determined by x-ray diffraction and which is formulated as a U^IV/U^V complex: [Cp*(Cl)(HNSPh₂)U(μ₃-O)(μ₂-O)₂U(Cl)(HNSPh₂)₂]₂.     

Structural and dynamic variations in DNA hexamers containing T-T and F-F single and tandem internal mispairs

Molecular dynamics simulations of double-helical DNA oligomers have been performed to investigate differences in the structure, dynamics, and hydration of F-F and T-T mispairs. Hexamers containing F-F pairs were found to be more dynamic, especially in the region of the mispair itself. This dynamic variability derives from greater flexibility of F-F pairs. The T-T mispairs, on the other hand, were found to be comparatively tightly bound as wobble pairs. The major and minor groove edges of the T-T pairs were observed to be solvated at exposed carbonyl positions by at least one water molecule, while F-F pairs lacked solvating waters. Stacking interactions were nearly identical for T-T and F-F pairs, leading to similar average structures, even though F stacking was more dynamically variable. Solvation differences between F-F and T-T therefore support the steric exclusion model for nucleotide incorporation in DNA replication. Large differences in the orientation of minor groove functional groups, in addition to differences in solvation, further rationalize why F bases present during DNA extension events induce stalls. Two novel nucleotides are proposed to further elucidate minor groove interactions of DNA with polymerase molecules.Electronic Supplementary Material This Material consists of equilibration protocol, plots of center-of-mass stacking, water radial distribution functions, helical parameter dynamics, and dynamics data for a control AT sequence. Supplementary material is available in the online version of this article at Contribution to the Jacopo Tomasi Honorary Issue     

Implications of active site constraints on varied DNA polymerase selectivity

DNA polymerase selectivity often varies significantly depending on the DNA polymerase. The origin of this varying error propensity is elusive. It is assumed that DNA polymerases form nucleotide binding pockets that differ in properties such as shape and tightness. We tested this prediction and studied HIV-1 RT by employment of size-augmented nucleotides and site-directed mutagenesis of the enzyme. New valuable insights into the mechanism of DNA polymerase fidelity were obtained. The presented study provides experimental evidence that variations of steric constraints within the nucleotide binding pocket of at least two DNA polymerases cause variations in nucleotide incorporation selectivity. Thus, our results support the concept of active site tightness as a causative in differential fidelity among DNA polymerases.     

Übergangsmetall—methylen-komplexe: LXI. Übergangsmetall—vinyliden-komplexe: Neuartige synthese aus diazoalken-vorstufen

The diazoolefines of composition N₂CCR₂ (R/R = CH₃/CH₃ and(-CH₂-)₅) are suitable precursors of the corresponding vinylidene ligands CCR₂. Thus, treatment of the RhRh complex [(η⁵-C₅Me₅)Rh(μ-CO)]₂ (1) with the N-nitrosourethanes 2a and 2b, resp., in the presence of lithium t-butoxide yields the otherwise inaccessible μ-vinylidene complexes (μ-CCR₂)[(η⁵-C₅Me₅)Rh(CO)]₂ (R = CH₃ (3a), R,R = (-CH₂-)₅ (3b)). The analogous cobalt compound (μ-CCMe₂)[(η⁵-C₅Me₅)Co(CO)]₂ (5a) is obtained similarly. This procedure extends the well-documented diazoalkane method for the synthesis of μ-alkylidene complexes to the less stable diazoalkenes. A single-crystal X-ray diffraction study of the dimethylvinylidene derivative 3a shows the CMe₂ ligand to adopt an almost symmetrically metal-bridging position (d(RhC) 197.8(1) and 204.3(1) pm), with a rhodium-rhodium single bond completing a three-membered Rh₂C-metallacycle (d(RhRh) 268.4(0) pm) analogous with cyclopropane.     

Moment characterization of localized orbitals

The parallel between orbital first and second electric moments and statistical first and second central moments is noted. Three measures of orbital spatial distribution in terms of their moments are proposed, and applied to the LMO's in a series of ten-electron hydrides. Consistent differences between bond and lone pair distributions are found. Using the statistical interpretation, for each LMO an effective solid angle around the central atom is postulated.     

Synthesis and properties of crosslinked polyvinylformamide and polyvinylamine hydrogels in conjunction with silica particles

Polyvinylamine hydrogels with silica particles encapsulated (PVAm/silica) were produced by a two‐step synthesis. In the first step, polyvinylformamide/silica (PVFA/silica) hybrids were synthesized from vinylformamide (VFA) and 1,3‐divinylimidazolidin‐2‐one (1,3‐bisvinylethyleneurea, BVU), as the crosslinker, by radical copolymerization in silica/water suspensions using different compositions of VFA/BVU. The target product PVAm/silica was obtained by acidic hydrolysis of the PVFA/silica hydrogels in a second step. The chemical structures of both hydrogels, PVFA/silica and PVAm/silica, respectively, were revealed by solid‐state ¹³C(¹H) cross‐polarity/magic‐angle spinning NMR spectroscopy. Both hydrogels swelled significantly in water. The swelling capacity of the two systems was characterized by the correlation length ξ (or hydrodynamic blob size) of the network meshes with small‐angle neutron scattering experiments. ξ is significantly larger for PVAm/silica than for PVFA/silica, which corresponds to the observed higher swelling capacity of this polyelectrolyte material. Furthermore, the swelling behavior of the hybrid hydrogels was quantitatively described in terms of free swell capacity, centrifuge‐retention capacity, adsorption against pressure, and free swell rate as compared with values of the corresponding copolymer hydrogels. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 3144–3152, 2002