Membrane introduction mass spectrometry

An overview of membrane introduction mass spectrometry (MIMS) is presented and comparisons are made with other direct sample introduction techniques. Special attention is given to the unique advantages and the limitations of newer variants on the MIMS technique, including affinity MIMS, reverse-phase and trap MIMS. The salient features of the interfaces used in MIMS are summarized and the various membrane materials commonly used are delineated. The applicability of MIMS is illustrated via discussion of

1. (i) bioreactor monitoring (represented by yeast fermentation),

2. (ii) environmental monitoring (illustrated by analysis of contaminated ground water samples) and

3. (iii) on-line chemical reaction monitoring (exemplified by the photolysis of aryl esters).

The applicability of MIMS to the analysis of environmental samples, including complex mixtures in water, air and soil, is noted.     

Ion structure determinations and ion—molecule reactions by double quadrupole mass spectrometry

The QQ mass spectrometer is shown to be applicable to ion structure determination via collision-induced dissociations of mass-selected ions. The instrument can be scanned so as to record the products of dissociation as well as those of ion—molecule association reactions. The dissociations correspond to those observed at high kinetic energy in mass-analyzed ion kinetic energy spectrometers and the association reactions show parallels with reactions seen in ion cyclotron resonance spectroscopy and in high-pressure mass spectrometry     

Chemical modification of fluorinated self-assembled monolayer surfaces by low energy reactive ion bombardment

Reactive collisions of low energy (<100-eV) mass-selected ions are used to chemically modify fluorinated self-assembled monolayer surfaces comprised of alkanethiolate chains CF₃(CF₂)₁₁(CH₂)₂S— bound to Au. Typical experiments were done by using 1-nA/cm² beams and submonolayer doses of reactant ions. Characterization of the modified surface was achieved by in situ chemical sputtering (60-eV Xe^+·) and by independent high mass resolution time-of-flight-secondary ionization mass spectrometry (TOF-SIMS) (15–25-keV, Ga⁺) experiments. Treatment with Si³⁵C1 ₄ ^+· produced a surface from which Xe⁺ sputtering liberated CF₂ ³⁵C1⁺ ions, which suggested Cl-for-F halogen exchange at the surface. Isotopic labeling studies that used Si³⁵Cl₂ ³⁷Cl ₂ ^+· ; and experiments with bromine-containing and iodine-containing projectiles, confirmed this reaction. High mass resolution TOF-SIMS spectra, as well as high spatial resolution images, provided further evidence as to the existence of halogen-exchanged species at the bombarded surface. Analogous Cl-for-F halogen substitution was observed in a model gas-phase reaction. The ion-surface reaction is suggested to proceed through an intermediate fluoronium ion in which the projectile is bonded to the target molecule. The most significant conclusion of the study is that selective chemical modification of monolayer surfaces can be achieved by using reactive ion beams, which lead to new covalent bonds at the surface and in the scattered ions.     

Negative and positive secondary ion mass spectra of organic acids

Organic compounds can be ionized by sputtering the solid sample. The resulting negative and positive secondary ions provide mass spectra which characterize both the molecular weights and the structures of the compounds. Ionization occurs either by direct ejection of charged species from the solid into vacuum or by electron or proton transfer. The sputtered secondary ions dissociate unimolecularly to give fragment ions. These reactions are identical to those which occur when the secondary ions are independently generated by chemical ionization, selected by mass and dissociated in a high energy gas phase collision. The negative ion SIMS spectra show molecular ions (M^?.) or (M-H)^? ions as the dominant high mass species together with fragments due to decarboxylation, dehydration and losses of other simple molecules. Stronger acids show larger (M-H)^?/M^?.abundance ratios. The positive ion spectra are complementary and also useful in characterizing molecular structures. Attachment of cations to organic molecules (cationization) occurs much more readily than anion attachment and this makes negative SIMS spectra simpler than these positive ion counterparts.     

Determination of ammonia, ethanol and acetic acid in solution using membrane introduction mass spectrometry

Methods have been developed to allow applications of membrane introduction mass spectrometry (MIMS) to monitor solution phase components of fermentation broths using electron ionization. The solutions are transported by flow injection analysis (FIA) through a direct insertion membrane probe, fitted with a silicone membrane in the sheet configuration. Analytes of interest pass through the membrane and are ionized by electron implant ionization. The compounds monitored are ammonia, acetic acid, and ethanol, with ammonia being detected as the monochloramine derivative which is generated at pH 10 upon addition of hypochlorite. Quantitation is achieved using external standard solutions. The dynamic range for the quantification of ammonia is 2-8000 ppm, and for ethanol and acetic acid 10-1000 ppm. This method provides rapid detection of analytes of interest, on-line monitoring capabilities, and the advantage of electron ionization. The introduction of samples into the mass spectrometer is achieved readily and automatically, the response time is a few seconds, and there are no memory effects.     

Clustering of nucleosides in the presence of alkali metals: Biologically relevant quartets of guanosine,deoxyguanosine and uridine observed by ESI-MS/MS

Electrospray ionization (ESI) mass spectra of nucleosides, recorded in the presence of alkali metals, display alkali metal ion-bound quartets and other clusters that may have implications for understanding non-covalent interactions in DNA and RNA. The tetramers of guanosine and deoxyguanosine and also their metaclusters (clusters of clusters), cationized by alkali metals, were observed as unusually abundant magic number clusters. The observation of these species in the gas phase parallels previous condensed-phase studies, which show that guanine derivatives can form quartets and metaclusters of quartets in solution in the presence of metal cations. This parallel behavior and also internal evidence suggest that bonding in the guanosine tetramers involves the bases rather than the sugar units. The nucleobases thymine and uracil are known to form magic number pentameric adducts with K+, Cs+ and NH4+ in the gas phase. In sharp contrast, we now show that the nucleosides uridine and deoxythymidine do not form the pentameric clusters characteristic of the corresponding bases. More subtle effects of the sugars are evident in the fact that adenosine and cytidine form numerous higher order clusters with alkali metals, whereas deoxyadenosine and deoxycytidine show no clustering. It is suggested that hydrogen bonding between the bases in the tetramers of dG and rG are the dominant interactions in the clusters, hence changing the ribose group to deoxyribose (and vice versa) generally has little effect. However, the additional hydroxyl group of RNA nucleosides enhances the non-selective formation of higher-order aggregates for adenosine and cytidine and results in the lack of highly stable magic number clusters. Some clusters are the result of aggregation in the course of ionization (ESI) whereas others appear to be intrinsic to the solution being examined.     

Building mass spectrometers and a philosophy of research

Development of the techniques of ion kinetic energy spectrometry and mass-analyzed ion kinetic energy spectrometry is described. The extension of these concepts to the method of tandem mass spectrometry for direct mixture analysis is traced, and a rationale for the construction of hybrid mass spectrometers is presented. Collisions of polyatomic ions with surfaces are discussed as an outgrowth of gaseous collisions. An attempt is made to describe a philosophy of research that guided the construction of a dozen mass spectrometers and the exploration of organic ion chemistry in as many contexts.     

Determination of pentachlorophenol by negative ion chemical ionization with membrane introduction mass spectrometry

Pentachlorophenol (PCP) was used as a model compound to explore the potential of desorption chemical ionization (DCI) in the determination of polychlorinated pesticides using membrane introduction mass spectrometry (MIMS). A direct insertion membrane probe was modified so that a chemical ionization plasma could be established at the membrane surface. Using selected ion monitoring (SIM) in a tandem triple quadrupole mass spectrometer with isobutane chemical ionization (CI), the PCP detection limit under positive chemical ionization is 20 ppb whereas negative CI gives detection limits in the low ppb range. This performance is achieved without any pre-treatment or derivatization of the sample. Negative ion CI gives a signal that is linear over a concentration range of 2-1000 ppb. Comparison of data obtained with low ppb samples of 2,4,6-trichlorophenol, 2,3,4,6-tetrachlorophenol and pentachlorophenol suggests that the sensitivity of this analytical procedure increases with increase in the number of electronegative substituents in the molecule.     

Trace level analysis of volatile and semi-volatile organic compounds in water using a membrane/jet separator interfaced to an ion trap mass spectrometer

An ion trap mass spectrometer, equipped with a membrane/jet separator interface, is used for the direct detection of volatile and semi-volatile organic compounds in aqueous solutions. Aqueous sample is passed through a capillary membrane, the outside surface of which is continuously purged by helium. The permeate is pneumatically transported to the mass spectrometer via a jet separator which acts as an additional enrichment device. The performance and response characteristics of non-porous silicone and microporous polytetrafluoroethylene (PTFE) membranes are studied. The microporous membrane allows sufficient water to pass for it to be used as a reagent gas for chemical ionization. Both types of membranes provide detection limits in the parts per trillion (pptr) to parts per billion (ppb) range with a linear dynamic range of 3 orders of magnitude for some volatile organic compounds. Results show that there is no detectable matrix effect on response in the selected cases examined. The use of microporous membranes to analyze more polar compounds, such as 5-hydroxymethyl furfuraldehyde and lactic acid, is also demonstrated. The effects of other experimental parameters, such as membrane temperature and length, on sensitivity are also investigated.