Effects of injector geometry and sample matrix on injection and sample loading in integrated capillary electrophoresis devices

The double-T injector design employed in many microchip capillary electrophoresis devices allows for the formation of very small (50-500 pL) sample plugs for subsequent analysis on-chip. In this study, we show that sample plugs formed at the channel junction can be geometrically defined. The channel width and injector symmetry prove to be of great importance to good performance. A unique pushback of solvent into the side channels can be induced when the side channels have a very low resistance to flow, and this helps to better define the injected sample plug. Samples and running buffers of differing ionic strength (e.g., 10 mM KCl buffer and 20 mM KCl sample) can yield widely variable results in terms of plug shape and amount injected (variations of 1.5 to 10x). Applying bias voltages to all the intersecting channels aids in controlling the plug shape. However, when the ionic strengths of buffer and sample are not matched, the actual amount injected (up to 10x variations) can be inconsistent with the appearance of the plug formed in the injector (up to only 30 % variations). Operating at constant pH and ionic strength produced the most consistent results. This report examines the effects of altering the injector geometry and solution ionic strengths, and presents the results of using bias voltages to control plug formation. The observed results should provide a benchmark for modeling of the fluid dynamics in channel intersections.     

The proton affinity of proline analogs using the kinetic method with full entropy analysis

The proton affinity of proline analogs, L-azetidine-2-carboxylic acid (Aze), L-proline (Pro), and L-pipecolic acid (Pip), have been measured using the Armentrout modification of the extended kinetic method in a quadrupole ion trap instrument. Experimental values of 223.0 +/- 1.5, 224.9 +/- 1.6, and 225.6 +/- 1.6 kcal/mol have been determined for the 298K proton affinities of Aze, Pro, and Pip respectively. High level theoretical calculations using both MP2 and B3LYP methods at a variety of basis sets were carried out in order to give theoretical predictions for the 298 K proton affinity and gas phase basicity of all three analogs. Recommended values for the gas phase basicity and proton affinity for proline based on our work and other recent determinations are 216 +/- 2 and 224 +/- 2 kcal/mol.     

Separation and quantitation of phycobiliproteins using phytic acid in capillary electrophoresis with laser-induced fluorescence detection

The similar electrophoretic mobilities and sizes of several of the phycobiliproteins, which are derived from the photosynthetic apparatus of cyanobacteria and eukaryotic algae, render their separation and quantitation a challenging problem. However, we have developed a suitable capillary electrophoresis (CE) method that employs a phytic acid-boric acid buffer and laser-induced fluorescence (LIF) detection with a single 594 nm He-Ne laser. This method takes advantage of the remarkably high quantum yields of these naturally fluorescent proteins, which can be attributed to their linear tetrapyrrole chromophores covalently bound to cysteinyl residues. As such, limits of detection of 1.18 x 10(-14), 5.26 x 10(-15), and 2.38 x 10(-15) mol/l were obtained for R-phycoerythrin, C-phycocyanin, and allophycocyanin proteins, respectively, with a linear dynamic range of eight orders of magnitude in each case. Unlike previously published CE-LIF methods, this work describes the separation of all three major classes of phycobiliproteins in under 5 min. Very good recoveries, ranging from 93.2 to 105.5%, were obtained for a standard mixture of the phycobiliproteins, based on seven-point calibration curves for both peak height and peak area. It is believed that this development will prove useful for the determination of phycobiliprotein content in naturally occurring cyanobacteria populations, thus providing a useful tool for understanding biological and chemical oceanographic processes.     

Cumulant functions in optical coherence theory

Cumulant functions are introduced to describe the statistical state of a radiation field. These functions are simply related to the optical coherence functions but have some interesting features. It is shown that if the cumulant functions of all orders greater than some numberN ₀ vanish then they also vanish for all orders greater than 2. Thermal field is the only field having this property. This property holds whether the field is described by a classical stochastic process or by a quantum density operator. Further the particular operator ordering used in defining these cumulant functions for the quantized field affects only the second order cumulant function. To describe the statistical state of a vector field such as partially polarized or unpolarized radiation, one would need to introduce cumulant tensors.     

Gas phase activation energy for unimolecular dissociation of biomolecular ions determined by focused RAdiation for gaseous multiphoton ENergy transfer (FRAGMENT)

We present a novel approach for the determination of activation energy for the unimolecular dissociation of a large (>50 atoms) ion, based on measurement of the unimolecular dissociation rate constant as a function of continuous-wave CO(2) laser intensity. Following a short ( approximately 1 s) induction period, CO(2) laser irradiation produces an essentially blackbody internal energy distribution, whose 'temperature' varies inversely with laser intensity. The only currently available method for measuring such activation energies is blackbody infrared radiative dissociation (BIRD). Compared with BIRD, FRAGMENT: (a) eliminates the need to heat the surrounding ion trap and vacuum chamber to each of several temperatures (each requiring hours for temperature equilibration); (b) offers a three-fold wider range of effective blackbody temperature; and (c) extends the range of applications to include initially cold ions (e.g., gas-phase H/D exchange). Our FRAGMENT-determined activation energy for dissociation of protonated bradykinin, 1.2 +/- 0.1 eV, agrees within experimental error to the value, 1.3 +/- 0.1 eV, previously reported by Williams et al. from BIRD experiments. Copyright 1999 John Wiley & Sons, Ltd.     

Protein labeling with red squarylium dyes for analysis by capillary electrophoresis with laser-induced fluorescence detection

Two new red luminescent asymmetric squarylium dyes (designated "Red-1c and Red-3") have been shown to exhibit absorbance shifts to longer wavelengths upon the addition of protein, along with a concomitant increase in fluorescence emission. Specifically, the absorbance maxima for Red-1c and Red-3 dyes are 607 and 622 nm, respectively, in the absence of HSA, and 642 and 640 nm in the presence of HSA, making the excitation of their protein complexes feasible with inexpensive and robust diode lasers. Fluorescence emission maxima, in the presence of HSA, are 656 and 644 nm for Red-1c and Red-3, respectively. Because of the inherently low fluorescence of the dyes in their free state, Red-1c and Red-3 were used as on-column labels (that is, with the dye incorporated into the separation buffer), thus eliminating the need for sample derivatization prior to injection and separation. A comparison of precolumn and on-column labeling of proteins with these squarylium dyes revealed higher efficiencies and greater sensitivities for on-column labeling, which, when conducted with a basic, high-salt content buffer, permitted baseline resolution of a mixture of five model proteins. LOD for model proteins, such as transferrin, alpha-lactalbumin, BSA, and beta-lactoglobulin A and B, labeled with these dyes and analyzed by CE with LIF detection (CE-LIF) were found to be dependent upon dye concentration and solution pH, and are as low as 5 nM for BSA. Satisfactory linear relationships between peak height (or peak area) and protein concentration were obtained by CE-LIF for this on-column labeling method with Red-3 and Red-1c.     

Determination of phycobiliproteins by capillary electrophoresis with laser-induced fluorescence detection

Phycobiliproteins are derived from the photosynthetic apparatus of cyanobacteria and eukaryotic algae. They are composed of a protein backbone to which linear tetrapyrrole chromophores are covalently bound. Furthermore, they are water-soluble highly fluorescent, and relatively stable at room temperature and neutral pH. For this reason, capillary electrophoresis-laser induced fluorescence (CE-LIF) seems the idea method for determination of these important proteins. The effects of buffer additives such as sodium dodecyl sulfate (SDS)and putrescine on the separation of the three major phycobiliprotein types, namely allophycocyanin, phycocyanin, and phycoerythrin, with excitation and emission maxima at 652/660, 615/647, and 565(494)/575 nm, respectively, are considered. Detection limits for these proteins by CE-LIF are some 60-500 times better than by absorbance detection. The development of a fast and sensitive CE-LIF assay such as this is of potential significance to our understand ing of chemical and biological oceanographic processes.     

Stereoselective bis-functionalizations of arene chromium tricarbonyl complexes via brook rearrangements

[reaction: see text] An efficient method has been developed for the stereoselective bis-functionalization of arene chromium tricarbonyl complexes. Initial nucleophilic addition of organolithium reagents to a carbonyl moiety is followed by a 1,4-carbon to oxygen silyl migration (Brook rearrangement) and alkylation of the resultant aryl anion.     

Enzymatic assay of marine bacterial phosphatases by capillary electrophoresis with laser-induced fluorescence detection

Microbial ectoenzyme activities in aquatic environments are important determinants of polymer hydrolysis and indicators of the state of microbial carbon, nitrogen, and phosphorus nutrition. Marine ectoenzymes are found on the cell surface or in the periplasmic space of gram-negative heterotrophic bacteria. Phosphatases, which remove phosphate groups from substrates, are one example of an ectoenzyme. Enzyme assays based on-capillary electrophoresis (CE) take advantage of CE's high-efficiency separation, extremely low sample volume requirements, and its ability to electrophoretically mix and separate zones of enzymes, substrates, and products all in one experimental run. CE has better resolving power and, when utilized with laser-induced fluorescence (LIF) detection, it is more sensitive than chromatography. CE-LIF is a promising tool for determining different phosphatases within a single microbial strain as well as the functional diversity between strains. In this study, four bacterial strains were studied (Shewanella sp., TW7, BB2AT2, and Vibrio alginolyticus) with each yielding at least one phosphatase that was kinetically characterized. K(m) values were calculated and found to be in the range of 0.0725-3.35 microM, whereas V(max) values ranged from 1.02 x 10(-3) to 1.05 x 10(-2) microM/min. The large range of values demonstrates differences among the phosphatases, suggesting different roles for each phosphatase not only between the species but also within a single bacterial species. This can have the important implications for organic matter processing in the sea.