Application of hydrophilic ionic liquids as co-solvents in chloroperoxidase catalyzed oxidations

The effect of hydrophilic ionic liquids (ILs) on the activity of chloroperoxidase (CPO) was checked through kinetic and stereochemical studies. The possibility to employ this enzyme in synthesis has been demonstrated investigating the chemo- and stereoselectivity of oxidation of phenyl methylsulfide in several citrate buffer-IL mixtures.     

Competing kinetic pathways in the bromine addition to allylic ethers in 1,2‐dichloroethane: Opposite temperature effects

The kinetics of the electrophilic bromination of three allylic ethers in a nonprotic solvent, 1,2‐dichloroethane, has been investigated. Two of them followed a prevalent second‐order pathway, while the third one exhibited a classical, clean third order. The second‐order pathway in the first two olefins is attributed to electrophilic assistance of the ethereal oxygen to the attacking bromine molecule. In the molecular bromination of 2,4‐cis‐dimethyl‐8‐oxabicyclo[3.2.1]‐6‐octen‐3‐cis‐ol, opposite temperature dependences were found for the two different kinetic pathways. An exoergonic process for the second‐order reaction was explained by the lesser stability of the bromiranium–bromide ionic intermediate, compared to the bromiranium–tribromide in the third‐order profile. © 2007 Wiley Periodicals, Inc. 39: 197–203, 2007     

The effect of the anion on the physical properties of trihalide-based N,N-dialkylimidazolium ionic liquids

Low viscosity, high density trihalide-based 1-n-butyl-3-methylimidazolium ionic liquids have been prepared and characterised. Key physical properties (density, conductivity, melting point, refractive index, surface tension and diffusion coefficient) of the ionic liquids have been determined and are compared with those of other 1,3-dialkylimidazolium molten salts. The relationship between anion identity and the physical properties of the ionic liquids under investigation is discussed.     

A combinatorial approach to obtain affinity media with binding properties towards the aflatoxins

In our work we performed a combinatorial solid-phase synthesis in aqueous medium to prepare peptide libraries from which to select an amino acid sequence with binding properties towards aflatoxins.We used polystyrene beads, functionalised with carboxylic groups as solid support and eight amino acids as monomers. During the first step 64 different sequences of two amino acids were prepared by exploiting the principles of combinatorial chemistry; then the binding properties of all sequences towards aflatoxin B(1 )were checked. We determined binding constants towards aflatoxin B(1) and towards aflatoxins B(2), G(1) and G(2). Results were promising, so we prepared a new library by using the selected dipeptide as the starting solid phase. After selecting the best tetrapeptide sequences, we determined binding constants towards the quoted aflatoxins. We obtained binding constants ( K>10(4) M(-1)) similar to those shown by human serum albumin for similar compounds. Preliminary studies on an extraction column were promising for the development of an SPE system and for its application in food matrices.     

Proton controlled intramolecular communication in dinuclear ruthenium(II) polypyridine complexes

The synthesis and characterization of two dinuclear ruthenium polypyridyl complexes based on the bridging ligands 5,5'-bis(pyridin-2' '-yl)-3,3'-bis(1H-1,2,4-triazole) and 5,5'-bis(pyrazin-2' '-yl)-3,3'-bis(1H-1,2,4-triazole) and of their mononuclear precursors are reported. The dinuclear compounds have been prepared by a Ni(0) catalyzed coupling of a mononuclear ruthenium(II) polypyridyl complex containing a brominated triazole moiety. Electrochemical and photophysical studies indicate that, in these dinuclear complexes, the protonation state of the bridge may be used to tune the intercomponent interaction between the two metal centers and that these species act as proton driven three-way molecular switches that can be read by electrochemical or luminescence techniques.     

Adsorption isotherms of a molecular imprinted polymer prepared in the presence of a polymerisable template: Indirect evidence of the formation of template clusters in the binding site

The current opinion about molecular imprinted polymers (MIPs) is that their molecular recognition properties are due to the presence of nanocavities formed during a polymerization process developed in the presence of a template molecule. According to this principle, the shape of these nanocavities is complementary to that of the template and non-covalent interactions are established between the binding site and a single template molecule. Nevertheless, there are some experimental indications that the real molecular recognition mechanism involves clusters of template molecules being packed into the binding site. Recently, it has been proposed that template molecules covalently linked to the binding site can act as nucleation points, enhancing the formation of these molecular clusters.We have tested this hypothesis by studying the adsorption isotherms of polymers prepared by imprinting them with 2,4,5-trichlorophenoxyacetic acid (2,4,5-T). Three different polymers were considered: P0, prepared without the template, P1, whose template was represented by 2,4,5-T molecules, and P2, whose template was 1/3 constituted by the polymerisable 2-(2,4,5-trichlorophenoxyacetoxy)-ethylmethacrylate (2,4,5-TEMA) and 2/3 by 2,4,5-T. The polymers were prepared by thermoinduced polymerization of template mixtures, 4-vinylpyridine and ethylene dimethacrylate. The crushed polymers were packed into HPLC columns and frontal chromatographic runs were performed by eluting the columns with a mobile phase containing variable amounts of 2,4,5-T.The experimental adsorption isotherms were fitted by using several isotherm models, and the Freundlich-Langmuir model was found to give the best fitting in terms of F-test. All the models considered showed a significant difference between the affinity constant values measured for the polymer P1 and P2, with a higher value for the polymer P2 (for Freundlich-Langmuir model: polymer P1, k=(2.00±0.43)×10⁴ M⁻¹; polymer P2, k=(1.93±0.0535)×10⁵ M⁻¹; ratio P2/P1, 9.65±2.09). Such experimental results support the hypothesis that a polymer prepared with a limited amount of template covalently attached to the binding site shows an increased affinity for the template itself.     

Novel RPLC stationary phases for lipophilicity measurement: solvatochromic analysis of retention mechanisms for neutral and basic compounds

An RPLC was developed to rapidly determine lipophilicity of neutral and basic compounds using three base deactivated RPLC stationary phases particularly designed for the analysis of basic compounds, namely, Supelcosil ABZ(+)Plus, Discovery RP Amide C16, and Zorbax Extend C18. The work consisted of three sets of experiments. In the first log kw values of neutral compounds were extrapolated using hydroorganic mobile phases at different compositions. Good correlation between log kw and log Poct indicated that the method was appropriate for these supports, without adding a silanol masking agent. In the second set of experiments, isocratic log k values of neutral and basic compounds were measured with three different mobile phases. The best estimation of lipophilicity was obtained for neutral and basic compounds when the secondary interactions were strongly reduced (i. e., when basic compounds were under their neutral form). In the third set of experiments, isocratic retention factors of basic compounds (in their neutral form) were measured with a high-pH mobile phase, on a chemically stable support (Zorbax Extend C18). Under these chromatographic conditions, correlation between the isocratic retention factors and log Poct (log D10.5) for basic compounds was similar to that for neutral compounds.     

Diels-Alder chemistry at furan ring functionalized solid surfaces

A substrate-independent method for Diels-Alder chemistry at solid surfaces is described for the first time.     

Interaction between zigzag single-wall carbon nanotubes and polymers: a density-functional study

Density-functional all-electrons calculations within local-density approximation show that the two isoelectronic polymers poly(para-phenylene) and poly(para-borazylene) weakly interact with zigzag single-walled carbon nanotubes. The analysis of the electronic properties of the joint systems, both with the polymer inside and outside the nanotubes, reveals a physisorption process with small changes in band structures and densities of states with respect to the constituents. We evaluate the potential barrier arising between polymers and nanotubes. Finally, we remark a generic selectivity of poly(para-phenylene) with respect to the electronic behavior of nanotubes, leading to a change in the density of states of metallic tubules.     

Selectivity features of molecularly imprinted polymers recognising the carbamate group

The molecular recognition properties of molecular imprinted polymers which bind the carbamate function were studied. Functional monomers potentially able to form non-covalent interactions with the model molecule N,O-dibenzylcarbamate were selected on the basis of a computational approach describing possible interactions between the template and a small library of vinylic monomers. These results were in accordance with N,O-dibenzylcarbamate batch-rebinding measurements performed on several miniMIPs prepared with the same library. From these preliminary results, four polymers were prepared by thermoinduced radical polymerization, using ethylene dimethacrylate as a cross-linker, chloroform (MIP1, MIP3) or acetonitrile (MIP2, MIP4) as porogens and methacrylic acid (MIP1, MIP2) or acrylamide (MIP3, MIP4) as functional monomers. Molecular recognition features of these materials were studied by high-performance liquid chromatography. In this manner selectivity was evaluated by considering the column retention of a library of sixteen structural analogues of dibenzylcarbamate, characterized by the transformation of the carbamate into a related function, or by the alteration of the molecular structure.The experimental results show that methacrylic acid is more efficient than acrylamide as a functional monomer (imprinting factors: MIP1 = 24.1, MIP2 = 25.6, MIP3 = 13.3, MIP4 = 2.44), and that chloroform enhances polymer selectivity. As regards structural motifs which conditionate the selectivity, the carbamate function strictly controls the presence/absence of molecular recognition, while shape and dimension of the substituents modulate the recognition itself. In particular, a marked recognition for analogs which were slightly bigger than the template was observed (N-benzyl-O-phenethylcarbamate: MIP1 α = 1.13, MIP2 α = 1.41, MIP3 α = 0.97; N-phenethyl-N-benzylcarbamate: MIP1 α = 1.61, MIP2 α = 1.17, MIP3 α = 0.81; N,O-diphenethylcarbamate: MIP1 α = 0.89, MIP2 α = 1.20, MIP3 α = 0.55).