Transition of 3D to 2D growth modes of InAs grown on GaAs

We report a method to grow thin strain-released InAs layer on GaAs (1 0 0) substrates by molecular beam epitaxy. We have shown that by controlling the growth parameters, a thin 2D InAs layer can be grown during initial stages, which eventually serves as a buffer layer to trap dislocations and epitaxial regrowth of InAs on this buffer results in high crystal quality. The size dependence of the InAs islands formed during initial stages with growth time has been studied by atomic force microscopy. With continuous short-time epitaxial growth during various stages, the InAs growth mode transfers from 3D to 2D. The introduction of dislocations into InAs epitaxial islands and their behavior during initial growth stage has been theoretically studied. The theoretical results are in remarkable agreement with the experimental results and shows that once the film is formed, the film strain is totally relaxed. The 200 nm thick InAs epilayer grown on this buffer shows a narrow X-ray diffraction peak. Such InAs strain-released buffer layer would be useful for regrowth of high In content based materials on top of it for electronics and optoelectronics device applications.     

Filamentous growth in activated sludge

Applied Biochemistry and Biotechnology - Bulking and foaming in activated sludge have been associated with filamentous overgrowth. FilamentousNocardia amarae and nonfilamentousPseudomonas...     

Microbial synthesis and characterization of physiochemical properties of polyhydroxyalkanoates (PHAs) produced by bacteria isolated from activated sludge obtained from the municipal wastewater works in Hong Kong

The first objective of this study was the measurement of physical properties of P(3HB-co-3HV) copolymers with different (hydroxybutyrate) HB to (hydroxyvalerate) HV ratios produced by Bacillus cereus (TRY2) isolated from activated sludge. The 3HV PHBV copolymers were 0.05, 22.6, 39.2, 54.1, and 69.1 mol%, respectively. The second objective was to study possible wastewater treatment and production of PHAs at the same time by B. cereus (TRY2) and Pseudomonas spp. (TOB17) (both were isolated from activated sludge), recombinant Bacillus DH5α, and a combination of the above three bacteria. The results were satisfactory; the maximum COD and TOC of the sewage sludge reduced were 53.5% and 67.5%, respectively.     

Operation of a novel anaerobic biofilter for treating food-processing wastewater

Applied Biochemistry and Biotechnology - An anaerobic biofilter was operated with 4500 mg COD/L food-processing waste water, fed at 10 d of hydraulic retention time (HRT). In 45 d after seeding,...     

High-performance liquid chromatographic method for routine determination of vitamins A and E and beta-carotene in plasma.

A simple and reliable reversed-phase high-performance liquid chromatographic (HPLC) method for the routine determination of vitamins A and E and beta-carotene in plasma (or serum) with wavelength-programmed ultraviolet-visible absorbance detection is described. A 200-microliters aliquot of serum or plasma sample, after deproteinization with ethanol, and containing tocopherol acetate as internal standard, was extracted with butanol-ethyl acetate. Sodium sulphate was added for dehydration. Analytes of extracted samples were found to be stable for at least four days. A 10-microliters aliquot of this organic extract was used for HPLC analysis. The mobile phase was methanol-butanol-water (89.5:5:5.5, v/v) and the flow-rate was set at 1.5 ml/min. The analytes of interest were well separated from other plasma constituents within 22 min at 45 degrees C. The lowest detection limits of vitamins A and E and beta-carotene were 0.02, 0.5 and 0.1 microgram/ml, respectively. The recovery and reproducibility of the present method were around 90%. The method is sensitive, specific and can be used for epidemiological studies and for routine determination of vitamin deficiency. Several important factors that may affect the analysis are also discussed in this paper.     

A thermogravimetric analyzer for condensable gas adsorption under subatmospheric conditions

Potential alternative to petrochemical polymers, soy protein isolate (SPI), a plentily available, natural biopolymer is chemically modified with thiourea at 2.5, 5, 7.5, 10, 15 and 20 mass/mass% for better processing of plastic as a raw material. From the FTIR studies, it has been ascertained that there is no bonding reaction between SPI and thiourea and it acts as a modifier only. Thermogravimetric analysis of the modified material has been followed using a computer analysis method, LOTUS package, developed by us for assigning the degradation mechanism. A number of equations have been used to evaluate the kinetic parameters. The mechanism of degradation of the biopolymer is explained on the basis of the kinetic analysis.     

Effects of fatty acids on growth and poly-3-hydroxybutyrate production in bacteria

The effects of saturated and unsaturated fatty acids (lauric acid, palmitic acid, steric acid, oleic acid, linoleic acid, soybean oil) on Sphaerotilus natans, 0B17 (Pseudomonas sp.), and recombinant Escherichia coli DH5(/pUC19/CAB were studied. Oleic acid enhances Poly-3-hydroxybutyrate (PHB) production in these three bacterial strains, suggesting that the single double bond of the acid activates the polyhydroxylkanoate accumulation enzymatic reaction. Under the effect of lauric acid and linoleic acid, the growth of S. natans and 0B17 were totally inhibited. However, the enhanced PHB accumulation in recombinant E. coli was observed.