Controlled-porosity glasses as alternative adsorbents to silica gel for HPLC

Summary The paper deals with the use of controlled-porosity glasses (CPGs) as adsorbents for HPLC. The physicochemical and chromatographic properties of small-pore CPGs are compared to the analogous properties of silica gels. The results show good correlation between them and suggest the possibility of application of CPGs as adsorbents for liquid chromatography.     

A simple isotherm equation for describing gas adsorption on heterogeneous microporous solids

A simple isotherm equation for describing gas adsorption on solids showing heterogeneity of microporous structure is proposed. It is shown that this equation gives a good representation of the experimental data of argon, nitrogen and benzene adsorption on different types of activated carbons. Its parameters may be used to characterize heterogeneity of microporous structure of the solids.

---

Eine einfache Isotherme zur Beschreibung der Gas-Adsorption an heterogenen mikroporösen Feststoffen

Zusammenfassung Es wird eine einfache Isotherme zur Beschreibung der Gasadsorption an Feststoffen mit heterogener mikroporöser Struktur vorgeschlagen. Es wird gezeigt, daß diese Gleichung die experimentellen Daten für die Adsorption von Argon, Stickstoff und Benzol an verschiedenen Typen von Aktivkohle gut beschreibt. Die Parameter der Isotherme können zur Charakterisierung der Heterogenität der mikroporösen Struktur von Festkörpern herangezogen werden.

     

Quantitation of the benzodiazepine antagonist flumazenil in human plasma by gas chromatography-mass spectrometry

A gas chromatographic-mass spectrometric procedure has been developed for the quantitation of the benzodiazepine antagonist flumazenil in human plasma. The assay utilizes an extraction at alkaline pH with benzene-dichloroethane (80:20), selective ion monitoring, isobutane positive-ion chemical ionization mass spectrometry and stable isotope dilution. The method has been used to measure plasma concentrations of flumazenil in over 1500 clinical samples over a range of 0.5-200 ng/ml (using 2 ml of plasma).     

Instantaneous quadrature low-coherence interferometry with 3 x 3 fiber-optic couplers

We describe fiber-based quadrature low-coherence interferometers that exploit the inherent phase shifts of 3 x 3 and higher-order fiber-optic couplers. We present a framework based on conservation of energy to account for the interferometric shifts in 3 x 3 interferometers, and we demonstrate that the resulting interferometers provide the entire complex interferometric signal instantaneously in homodyne and heterodyne systems. In heterodyne detection we demonstrate the capability for extraction of the magnitude and sign of Doppler shifts from the complex data. In homodyne detection we show the detection of subwavelength sample motion. N x N (N > 2) low-coherence interferometer topologies will be useful in Doppler optical coherence tomography (OCT), optical coherence microscopy, Fourier-domain OCT, optical frequency domain reflectometry, and phase-referenced interferometry.     

Molecular contrast in optical coherence tomography by use of a pump-probe technique

We describe a novel technique for contrast enhancement in optical coherence tomography (OCT) that makes possible molecular-specific imaging for what is believed to be the first time. A pump-probe technique is employed in which a pulsed pump laser is tuned to ground-state absorption in a molecule of interest. The location of the target molecule population is derived from the resulting transient absorption of OCT sample-arm light acting as probe light. A signal processing technique for three-dimensional localization of the transient absorption signal is described, and preliminary results exhibiting OCT contrast from methylene blue dye in multilayer and scattering phantoms are presented.     

Correlation between the surface free energy of modified and non-modified glasses with controlled porosity and their sorption properties

Summary Contact angles for water and diiodomethane drops were measured on the surface of thermally and chemically (by Carbowax 20M bonding) modified porous glasses and on the surface of naphthalene, diphenyl and anthracene. Using the obtained results to a modified Young equation, dispersion and nondispersion components of the surface free energy of these glasses and organic substances were calculated. The work of adhesion (W_A) for benzene, naphthalene, diphenyl, anthracene, nitrobenzene was estimated and correlated with the capacity factors, (k′) of these substances. On the basis of experimental and calculated data it can be stated that the thermal treatment of porous glasses increases, their hydrophobicity but the Carbowax layer causes hydrophilicity. There is a linear relationship between k′ and W_A which can be helpful for predicting retention data of chromatographed substances on the base of surface free energy which can be calculated from contact angle measurements.     

Soft-templating synthesis and adsorption properties of mesoporous carbons with embedded silver nanoparticles

Mesoporous carbons containing silver nanoparticles have been successfully synthesized under acidic conditions by employing resorcinol and formaldehyde as carbon precursors and triblock copolymer EO₁₀₁PO₅₆EO₁₀₁ (Lutrol F127) as a soft template. Silver nanoparticles of ∼90 nm were added to the synthesis mixture to achieve 10 wt% and 20 wt% of Ag loading in the carbon. Also, tetraethyl orthosilicate (TEOS) was introduced to the system in order to improve adsorption properties of the silver-carbon composites and to reinforce its structure. The resulting carbons with incorporated silver nanoparticles featured high surface areas, large total pore volumes and primary mesopores in the range between ∼6–7 nm.     

Bioautography detection in thin-layer chromatography

Bioautography is a microbial detection method hyphenated with planar chromatography techniques. It is based mainly on antimicrobial or antifungal properties of analyzed substances. The review discusses three versions of bioautography, i.e. contact, immersion and direct bioautography. The more concern is given to the last one. Many applications are quoted, not only for testing various groups of compounds, but also for investigating biochemical processes and factors influencing bacterial growth. Additionally, related methods, which can be included into direct bioautography, are discussed. The most promising among them seems to be TLC-bioluminescence screening.     

Adsorption and structural properties of soft-templated mesoporous carbons obtained by carbonization at different temperatures and KOH activation

Two series of phenolic resin-based mesoporous carbons were prepared by soft-templating strategy, which involves the formation of thermosetting carbon precursor by polymerization of phloroglucinol and formaldehyde in hydrophilic mesodomains of a thermally decomposable triblock copolymer used as a soft-template. It was shown that the volumes of mesopores and micropores in the resulting carbons can be tuned by varying carbonization temperature of phenolic resins in the range from 400 to 1000 °C followed by the post-synthesis KOH activation at 700 °C. The highly microporous carbons were obtained by KOH activation of phenolic resins pyrolyzed at lower temperature (∼500 °C), while high temperature KOH activation (∼800 °C) afforded microporous carbons with preserved mesoporosity.     

Synthesis of OMS Materials and Investigation of Their Acceptor–Donor Characteristics

Three ordered mesoporous siliceous (OMS) materials known as MCM41s—unmodified MCM-41C16 (“C16”), and two MCM41s with different surface functionalities: MCM-41C16-SH (“C16-SH”) and MCM-41C16-NH₂ (“C16-NH₂”)—were synthesized and studied by inverse gas chromatography in order to determine their acceptor–donor properties. The specific retention volumes of nonpolar and polar probes that were chromatographed on these ordered mesoporous silica adsorbents were evaluated under infinite dilution conditions. Two methods were employed to calculate the standard free energy of adsorption, ΔG _ads, of each chromatographed probe on the basis its specific retention volume. These ΔG _ads values were then employed to estimate the van der Waals contribution and the specific contribution of the free surface energy for each MCM41. DN values (donor numbers, based on the Gutmann scale) and AN* values (acceptor numbers, based on the Riddle–Fowkes scale) were employed to determine the values of parameters that characterize the ability of the MCM41s to act as electron acceptors (parameter: K _A) and donors (parameter: K _D). Considering the different compositions of the probes, each of which has different acceptor–donor properties, a new chromatographic test to supplement the Grob test is suggested.