A density functional theory study on the water aggregation behaviour of fatty acid-based anionic surface active ionic liquids

Structural Chemistry - The hydrogen bond interactions between methyl-imidazolium cation (MIM+) and fatty acid anions (CmHnCOO–, where m?=?1–6; n-3–13) of ionic liquids...     

An M/G/1 Retrial Queueing System with Two-Phase Service and Preemptive Resume

An M/G/1 retrial queueing system with additional phase of service and possible preemptive resume service discipline is considered. For an arbitrarily distributed retrial time distribution, the necessary and sufficient condition for the system stability is obtained, assuming that only the customer at the head of the orbit has priority access to the server. The steady-state distributions of the server state and the number of customers in the orbit are obtained along with other performance measures. The effects of various parameters on the system performance are analysed numerically. A general decomposition law for this retrial queueing system is established.     

Vibrational spectra and ab initio computations of sarcosinium oxalate monohydrate

Single crystals of sarcosinium oxalate monohydrate (SOM) are grown by the slow-evaporation technique at ambient temperature, and vibrational spectroscopic analysis is carried out using NIR-FT Raman, FT-IR, and SERS spectra. The normal mode frequencies and corresponding vibrational analysis of SOM are examined theoretically using the Gaussian’98 set of quantum chemical codes. The two bands present in the SOM ν C=O region, clearly observed in the Raman spectrum, are assigned to “free” and “bonded” carbonyl groups with the hydrogen atom. Vibrational analysis indicates the presence of C-H—O hydrogen bonding interaction producing a blueshift of the C-H stretching frequency.     

The sojourn time and related characteristics of the age-dependent branching process

An age-dependent branching process where disasters occur as a renewal process leading to annihilation or survival ofall the cells, is considered. For such a process, the total mean sojourn time of all the cells in the system is analysed using the regeneration point technique. The mean number of cells which die in timet and its asymptotic behaviour are discussed. When the disasters arrival as a Poisson process and the lifetime of the cells follows exponential distribution, elegant inter-relationships are found among the means of (i) the total number of cells which die in timet (ii) the total sojourn time of all cells in the system upto timet and (iii) the number of living cells at timet. Some of the existing results are deduced as special cases for related processes.     

About a conjecture on the centers of chordal graphs

In this paper, a conjecture of G.J. Chang, that d(C(G)) ≤2 for any connected chordal graphG withd(G) = 2r(G) - 2, is disproved.     

Determination of trace metallic impurities in high-purity quartz by ion chromatography

A method has been developed for the determination of relevant trace impurities (alkali, alkaline and transition metals) in high purity quartz by ion-chromatography. In situ reagent (HF) purification and simultaneous sample dissolution was achieved in a multichannel vapour phase digestion assembly. Twenty-one samples can be digested at a time in this vapour phase system. Significant decrease in the process blank levels for all the analytes was observed. Drastic reduction (250 times) of NH4+ blank was achieved in the described vapour phase digestion, which enables the determination of trace concentration of sodium in high purity quartz. After volatilisation of the matrix and unreacted HF, the clear water leached solutions were injected into an ion-chromatograph equipped with conductivity detector for the determination of alkali and alkaline earth metals. In the case of transition metals, the trace residues were leached with 10 mM HCl and after separation on a mixed bed analytical column (IonPac CS5) were detected by spectrophotometry after post column derivatisation using 4-(2-pyridylazo)resorcinol (PAR). The accuracy of the result was checked by their comparison with those obtained by independent methods like inductively coupled plasma (ICP) MS and ICP atomic emission spectrometry. The achievable detection limits are between 0.4 ng/g (Li) and 22 ng/g (Mn). The application of the method to the determination of the above trace metals in two high-purity-grade quartz samples is demonstrated.     

An indirect complexometric method for determination of tin in alloys

A simple and fast complexometric method for the determination of tin in alloys is presented. It is based on the initial complexation of tin with EDTA and its subsequent decomposition with mercaptosuccinic acid. Interference of ions normally encountered in determination of tin was studied. The method has been used for the analysis of alloys such as bronzes, solders, white metal and titanium base alloys.     

Pyrolysis studies of aromatic polyesters

The products of pyrolysis, at 400°C in vacuo (1 Pa), of poly(ethyleneterephthalate) (PET) and poly(butyleneterephthalate) (PBT) were studied. The products were identified by gas chromatography/mass spectrometry technique. The highly volatile products of PET contained acetaldehyde, benzene, toluene, styrene and ethylbenzene and in the case of PBT, butadiene, tetrahydrofuran, vinylcyclohexene and ethylbenzene were the major products. A qualitative analysis of the products of low volatility revealed that the main components were benzoic acid, terephthalic acid, monovinyl esters of terephthalic acid and higher oligomers in the case of PET, whereas benzoic acid, monobutenyl esters of terephthalic acid and higher oligomers were the main products from PBT. The results obtained were in good agreement with those obtained from pyrolysis experiments, carried out directly in the mass spectrometer. Mechanisms to explain the occurrence of the different products are proposed.     

Spectrophotometric determination of boron in complex matrices by isothermal distillation of borate ester into curcumin

In situ distillation of borate ester into the curcumin solution has been developed for the spectrophotometric determination of boron in a variety of complex matrixes. A polypropylene vessel containing the sample solution was placed inside a vessel (PP) containing 10 ml of curcumin solution and the distillation was carried out at room temperature/on a water bath. The borate ester collected in to the curcumin solution was evaporated to dryness on the water bath, taken in acetone and the absorbance was measured at 550 nm. In situ distillation of borate ester directly into the chromogenic reagent eliminates tedious sample treatment (before and/or after borate separation), use of methanol, complicated quartz set up, possible loss of boron and reduces the analysis time significantly. In situ dehydration of sample solution by ethanolic vapour in the absence of dehydrating acid prevents the formation of fluoborate and co-distillation of potential anionic interferents (nitrate and fluoride). This developed method has been applied for the determination of traces of boric acid in boron powder by the distillation of methyl borate at room temperature. For other matrixes (water, uranium oxide, uranyl nitrate, fluoride salt, etc.) distillation of ethyl borate was carried out on the water bath. LOD (3σ) was 5 ng g⁻¹ for water and 30 ng g⁻¹ for solid samples.     

Ag+ ion transport studies in a polyvinyl alcohol-based polymer electrolyte system

Thick films of pure polyvinyl alcohol and polyvinyl alcohol doped with silver nitrate with different compositions have been prepared by solution cast technique. The FT-IR spectrum confirms the complexation process. The conductivity of the pure polyvinyl alcohol is of the order of 10⁻⁷ Sm⁻¹ at 90 °C, and its value increases by two orders of magnitude when doped with 20 wt% of AgNO₃. The activation energy, calculated from the Arrhenius plot for all compositions of the poly vinyl alcohol doped with silver nitrate, is between 0.24 and 0.35 eV. The migration energy for the ion in polymer electrolyte has been calculated from the modulus spectrum, and is in good agreement with the activation energy calculated from the Arrhenius plot. The modulus spectra indicate the non-Debye nature of the material.