Synthesis of nano-polycrystalline diamond from glassy carbon at pressures up to 25 GPa

ABSTRACT

Nano-polycrystalline diamond (NPD) with various grain sizes has been synthesized from glassy carbon at pressures 15–25?GPa and temperatures 1700–2300°C using multianvil apparatus. The minimum temperature for the synthesis of pure NPD, below which a small amount of compressed graphite was formed, significantly increased with pressure from ～1700°C at 15?GPa to ～1900°C at 25?GPa. The NPD having grain sizes less than ～50?nm was synthesized at temperatures below ～2000°C at 15?GPa and ～2300°C at 25?GPa, above which significant grain growth was observed. The grain size of NPD decreases with increasing pressure and decreasing temperature, and the pure NPD with grain sizes less than 10?nm is obtained in a limited temperature range around 1800–2000°C, depending on pressure. The pure NPD from glassy carbon is highly transparent and exhibits a granular nano-texture, whose grain size is tunable by selecting adequate pressure and temperature conditions.     

Characterization and determination of linear alkylbenzenesulfonates in environmental water samples by high-performance liquid chromatography with a hydrophilic polymer column and electrospray ionization mass spectrometric detection.

A liquid chromatography-mass spectrometry (LC/MS) method was developed for the separation and determination of linear alkylbenzenesulfonates (C10-C14 LAS) in environmental water samples using a hydrophilic polymer column (Shodex Mspak GF-310 4D). This method involves a solid-phase extraction of the LAS samples with a Sep-Pak PS-2 cartridge. The LAS components were separated on the column with a mobile phase of 29% (w/v) acetonitrile-water containing 0.8 mM di-n-butylammonium acetate and 0.2 M acetic acid, and were detected by mass spectrometry with electrospray ionization. Detection limits of the developed method based on selected ion monitoring (SIM) technique for the C10-C14 LAS standards were 13-47 ng L(-1). The concentrations of the C10-C14 LAS in the environmental water samples ranged between 5-317 microg L(-1) for a river water sample and 0.4-6.4 microg L(-1) for a seawater sample. Linear relationships between the logarithms of retention factors and the alkyl chain lengths for each phenyl positional isomer of LAS could successfully be used for the identification of the isomer peaks.     

Synthesis and biological activities of analogs of a lipid A biosynthetic precursor: 1-O-phosphonooxyethyl-4'-O-phosphono-disaccharides with (R)-3-hydroxytetradecanoyl or tetradecanoyl groups at positions 2, 3, 2' and 3'.

Two novel analogs of a biosynthetic precursor of lipid A (2) were synthesized. The one analog (3) has acyl groups identical to those of 2, and the other (4) has tetradecanoyl groups in place of the (R)-3-hydroxytetradecanoyl groups of 2. Both 3 and 4 possess an alpha-glycosidically-bound phosphonooxyethyl group in place of the alpha-glycosyl phosphate group of 2. Compounds 3 and 4 exhibited definite antitumor activity against Meth A fibrosarcoma and low toxicity in rabbits, as the original compound 2 does. The replacement of the hydroxytetradecanoyl groups with tetradecanoyl groups barely affected the antitumor activity, but slightly enhanced the toxicity in rabbits.     

Synthesis and properties of polydiene and polypentenamer having formyl or hydroxymethyl groups and their photosensitive derivatives

cis-1,4-Polybutadiene and polypentenamer having pendant functional groups such as formyl, aldoxime, hydroxymethyl, or cinnamoyloxymethyl groups have been prepared, and some of their properties were investigated in terms of structural effect on physical properties of these polymers. cis-1, 4-Polybutadiene and polypentenamer having a different content of formyl group were prepared by the hydroformylation reaction with rhodium catalyst under mild conditions. The pendant formyl group was reduced to a hydroxymethyl group by using various reducing agents such as sodium borohydride or sodium trimethoxyborohydride which were effective to avoid a crosslinking reaction among the formyl groups. Glass transition temperature of polypentenamer having hydroxymethyl groups increased with increasing the content of the hydroxymethyl groups in the polymer. Cinnamoyl group was introduced into the polypentenamer having hydroxymethyl groups by reacting with cinnamoyl chloride so as to prepare a photosensitive rubber. The relationships between the photosensitivity of the cinnamoylated polypentenamer and the mobility of polymer main chains have been elucidated. A linear relationship between the photodimerization rate constant and the difference between ultraviolet (UV) irradiation temperature and the glass transition temperature of the polymer was found. It has become apparent that the photosensitivity of cinnamoylated polypentenamer can be estimated by the glass transition temperature of the original polymer, UV irradiation temperature, activation energy of the dimerization, and γ, which is a coefficient of the relationship between the photosensitive group concentration and the glass transition temperature of the polymer.     

Significance of anti-HBc IgM in acute hepatitis and hepatitis B associated chronic liver disease

To determine the diagnostic value of anti-HBc IgM in acute viral hepatitis or chronic liver disease B, Anti-HBc IgM was measured by a RIA and an ELISA in 32 patients with acute hepatitis (4 with type A, 15 with type B and 13 with type non A non B), 18 patients with chronic hepatitis and 19 patients with liver cirrhosis. In acute hepatitis B, anti-HBc IgM (both RIA and ELISA) was positive in 14(93%) of 15 patients and its cut-off index value was very high. However, anti-HBc IgM was always negative in one patient with typical course of type B. In 1 of 4 patients with acute hepatitis A and 2 of 13 with non A non B, anti-HBc IgM (RIA and/or ELISA) was positive. These 3 patients were positive for anti-HBs at the onset of disease, so we could not made the diagnosis of acute hepatitis B. Anti-HBc IgM was positive in 21(51%) of 37 patients with HBsAg-positive chronic liver disease by RIA and in 11 (30%) by ELISA, and its cut-off index value was relatively low. These results suggest that when adequate cut-off index value is established, anti-HBc analysis is useful for differentiating recent and current infections from remote infections.     

Synthesis and properties of 1,3,5-benzene periodic mesoporous organosilica (PMO): novel aromatic PMO with three point attachments and unique thermal transformations

A new aromatic periodic mesoporous organosilica material containing benzene functional groups that are symmetrically integrated with three silicon atoms in an organosilica mesoporous framework is reported. The material has a high surface area, well-ordered mesoporous structure and thermally stable framework aromatic groups. The functional aromatic moieties were observed to undergo sequential thermal transformation from a three to two and then to a one point attachment within the framework upon continuous thermolysis under air before eventually being converted to periodic mesoporous silica devoid of aromatic groups at high temperatures and longer pyrolysis times. The mesoporosity of the material was characterized by powder X-ray diffraction (PXRD), transmission electron microscopy (TEM), and nitrogen porosimetry, whereas the presence and transformation of the aromatic groups in the walls of the materials were characterized by solid-state NMR spectroscopy, mass spectrometry, and thermogravimetric analysis. The attachment of a benzene ring symmetrically onto three siloxanes of the framework was used advantageously as a cross-linker to enhance the thermal stability of the organic group. Some of these properties are investigated in comparison with other aromatic PMOs that have only two point attachments and an amorphous phenylsilica gel that has only one point attachment. The successful synthesis of the first aromatic PMO with its organic group attached within the framework through more than two points is an important step toward the synthesis of PMOs having organic groups with more complex and multiple attachments within the framework.     

Chemical structure of escherichia coli lipid A

The chemical structure of E. coli lipid A was elucidated to be $\text{2}$ by determination of the nature of the individual acyl groups bound to the two hydroxyl groups in positions 3,3′ and the two amino groups of the D-glucosamine disaccharide phosphate backbone.     

Oligothiophene-containing coumarin dyes for efficient dye-sensitized solar cells

We have developed oligothiophene-containing coumarin dyes fully functionalized for dye-sensitized nanocrystalline TiO(2) solar cells (DSSCs). DSSCs based on the dyes gave good performance in terms of incident photon-to-current conversion efficiency (IPCE) in the range of 400-800 nm. A solar energy-to-electricity conversion efficiency (eta) of 7.4% was obtained with a DSSC based on 2-cyano-3-[5'-(1,1,6,6-tetramethyl-10-oxo-2,3,5,6-tetrahydro-1H,4H,10H-11-oxa-3a-aza-benzo[de]anthracen-9-yl)-[2,2']bithiophenyl-5-yl]acrylic acid (NKX-2677) under simulated AM 1.5G irradiation (100 mW cm(-2)) with a mask: short-circuit current density (J(sc)) = 13.5 mA cm(-2); open-circuit voltage (V(oc)) = 0.71 V; fill factor (FF) = 0.77. Transient absorption spectroscopy measurements indicated that electron injection from NKX-2677 to the conduction band of TiO(2) is very rapid (<100 fs), which is much faster than the emission lifetime of the dye (1.0 ns), giving a highly efficient electron injection yield of near unity.     

Conformation of poly(<Emphasis Type="SmallCaps">l</Emphasis>-glutamic acid) in bipolar amphiphiles with alkyl ammonium cations of different hydrophobicity

The conformation of the sodium salt of poly(l-glutamic acid) (P(Glu)) in solutions of the cationic bipolar amphiphile 1, 20-isosanediylbis(alkylammonium chloride) (C ₂₀(RA) ₂) with different alkyl head groups as a function of amphiphile concentration was investigated using circular dichroism (CD). RA included methylammonium (MA), ethylammonium (EA), propylammonium (PA), butylammonium (BA), and pentylammonium (PeA) cationic groups. The CD spectrum of each C ₂₀(RA) ₂ had a double minima corresponding to the a-helix of P(Glu), which was replaced by CD spectra with a single minimum at wavelengths larger than 222 nm as concentration increased. These changes in the CD spectrum were ascribed to the conformational change from random coil to a-helix and to aggregates of helices. In C ₂₀(EA) ₂ solutions, a step-like change in the CD intensity was observed at 222 nm as a function of the ratio of C ₂₀(RA) ₂ to P(Glu). At the step, the CD spectrum of the complete a-helix was observed. At 10–35 °C, an a-helix was induced in P(Glu) in the order: C ₂₀(EA) ₂>C ₂₀(MA) ₂>C ₂₀(PA) ₂>C ₂₀(BA) ₂>C ₂₀(PeA) ₂. This order was ascribed to the best fit of ethylammonium to the P(Glu) side chain.     

Partial degradation and biological activities of an antitumor polysaccharide from rice bran.

A rice bran polysaccharide designated RON was subjected either to partial hydrolysis with formic acid or to partial degradation by ultrasonic irradiation. A significant change in the molecular size was also observed during simple chromatography of RON on a strongly acidic ion exchange resin, although the apparent molecular weight of RON had been assumed to be more than 1 x 10(6) daltons (Da). This fact indicates that RON exists as molecular aggregates, presumably mediated by metal cations. Degradation products with average molecular weights above ca. 1 x 10(4) Da which were obtained by any of the three methods still retained the following activities of RON: in vivo antitumor activity against Meth-A fibrosarcoma in mice by oral administration, and in vitro macrophage stimulatory effects to induce tumoricidal activity and interleukin 1 production. This molecular size was proven to be the minimum requisite for these activities because smaller fragments were scarcely active. The aggregation was characteristic of RON but not essential for its antitumor activity because definite, though slightly reduced, activity was exhibited even by the smaller fragments obtained after the ion exchange resin treatment.