Annealing effect on soft magnetic properties and magnetoimpedance of Finemet Fe73.5Si13.5B9Nb3Au1 alloy

Effect of annealing on the soft magnetic properties of Fe_73.5Si_13.5B₉Nb₃Au₁ amorphous ribbon has been investigated by means of structure examination, magnetoimpedance ratio (MIR) and incremental permeability ratio (PR) spectra measured in the frequency range of 1–10 MHz at a fixed current of 10 mA X-ray diffraction analysis showed that the as-cast sample was amorphous and it became nanocrystalline under a proper heat treatment. When annealing amorphous alloy at 530 °C for 30, 60, 90 min, soft magnetic properties have been improved drastically. Among the samples investigated, the sample annealed at 530 °C for 90 min showed the softest magnetic behavior. The MIR and PR curves revealed the desirable changes in anisotropy field depending upon annealing.     

On bounding the effective conductivity of isotropic composite materials

In this paper inequalities for the effective conductivity of isotropic composite materials are derived. These inequalities depend on several coefficients characterizing the microstructure of composites. The obtained coefficients can be exactly calculated for models of a two-component aggregate of multisized, coated ellipsoidal inclusions, packed to fill all space. As a result, new bounds for effective conductivity, considerably narrower than those of Hashin-Shtrikman, are established for such models of composite materials.     

The price of anarchy for non-atomic congestion games with symmetric cost maps and elastic demands

By showing that there is an upper bound for the price of anarchyρ(Γ) for a non-atomic congestion game Γ with only separable cost maps and fixed demands, Roughgarden and Tardos show that the cost of forgoing centralized control is mild. This letter shows that there is an upper bound for ρ(Γ) in Γ for fixed demands with symmetric cost maps. It also shows that there is a weaker bound for ρ(Γ) in Γ with elastic demands.     

Dynamic frictionless contact with adhesion

A model for the dynamic, adhesive, frictionless contact between a viscoelastic body and a deformable foundation is described. The adhesion process is modeled by a bonding field on the contact surface. The contact is described by a modified normal compliance condition. The tangential shear due to the bonding field is included. The problem is formulated as a coupled system of a variational equality for the displacements and a differential equation for the bonding field. The existence of a unique weak solution for the problem is established, together with a partial regularity result. The existence proof proceeds by construction of an appropriate mapping which is shown to be a contraction on a Hilbert space.     

Effect of Pressure on Fluid Damping in MEMS Torsional Resonators with Flow Ranging from Continuum to Molecular Regime

High quality factor of dynamic structures at micro and nano scale is exploited in various applications of micro electro-mechanical systems (MEMS) and nano electro-mechanical system. The quality factor of such devices can be very high in vacuum. However, when vacuum is not desirable or not possible, the tiny structures must vibrate in air or some other gas at pressure levels that may vary from atmospheric to low vacuum. The interaction of the surrounding fluid with the vibrating structure leads to dissipation, thus bringing down the quality factor. Depending on the ambient fluid pressure or the gap between the vibrating and the fixed structure, the fluid motion can range from continuum flow to molecular flow giving a wide range of dissipation. The relevant fluid flow characteristics are determined by the Knudsen number which is the ratio of the mean free path of the gas molecule to the characteristic flow length of the device. This number is very small for continuum flow and reasonably big for molecular flow. In this paper, we study the effect of fluid pressure on the quality factor by carrying out experiments on a MEMS device that consists of a double gimbaled torsional resonator. Such devices are commonly used in optical cross-connects and switches. We only vary fluid pressure to make the Knudsen number go through the entire range of continuum flow, slip flow, transition flow, and molecular flow. We experimentally determine the quality factor of the torsional resonator at different air pressures ranging from 760 Torr to 0.001 Torr. The variation of this pressure over six orders of magnitude ensures required rarefaction to range over all flow conditions. Finally, we get the variation of quality factor with pressure. The result indicates that the quality factor, Q, follows a power law, Q ∝P ^–r , with different values of the exponent r in different flow regimes. In the second part of the paper, we propose the use of effective viscosity for considering velocity slip conditions in solving Navier–Stokes equation numerically. This concept is validated with analytical results for a simple case and then compared with the experimental results presented in this paper. The study shows that the effective viscosity concept can be used effectively even for the molecular regime if the air-gap to length ratio is sufficiently small (h ₀/L<0.01). As this ratio increases, the range of validity decreases.     

A study of electrostatic spring softening for dual-axis micromirror

Electrostatic spring softening is an important characteristic of electrostatically actuated dual-axis micromirror, since it lowers the resonant frequencies. This paper presents an approach based on approximating the electrostatic forces by the first-order Taylor's series expansion to investigate this characteristic. The dual-axis micromirror studied in this paper has three motion modes, two torsional (about x- and y-axis, respectively) and one translational (about z-axis). The stiffnesses of all these modes are softened by a DC bias voltage applied to the mirror plate. The resonant frequencies are lowered with the increment of the bias voltage. The relationship of the bias voltage and the resonant frequencies of all the motion modes is derived. The analytical results show that the resonant frequency curves are affected by the capacitor geometries, i.e. the gap between the mirror plate and the electrodes and the electrodes size. The lowering curves drop slowly when the bias voltage is small. While for large bias voltage, the lowering curves drop rapidly. The experiment results are consistent with those obtained by the analytical approach.     

Synthesis and photoinduced memory effect of poly[2-N-carbazolylethyl acrylate-co-2-(3,5-dinitrobenzoyloxy) ethyl methacrylate]

Copolymers containing an intramolecular electron donor-acceptor (EDA) complex were synthesized by free radical copolymerization of 2-N-carbazolylethyl acrylate and 2-(3,5-dinitrobenzoyloxy)ethyl methacrylate. Glass transition temperatures show a positive deviation from the weight-average values of copolymers, indicating the presence of the specific EDA interaction in copolymers in the solid state. Photoinduced “memory effect,” which is defined as the percentage of the difference of the surface potential given by corona charging before and after irradiation of light on polymer films, was 30% for the copolymer with 5 mol% of acceptor content. Memory effect increased to 70% for a 8 μm film by doping with 2 wt% of trichloroacetic acid (TCAA), and leveled off at 5 wt% of TCAA content. Memory effect was also enhanced by increasing the thickness of polymer films and irradiation time. The largest value of memory effect (85%) was obtained from the film of the copolymer with 5 mol% acceptor content doped with 1 wt% TCAA and with thickness larger than 14 μm.     

Determination of volatile components in peptic powder by gas chromatography-mass spectrometry and chemometric resolution

Gas chromatography-mass spectrometry (GC-MS) coupled with chemometric resolution upon two-dimensional data was proposed as a method for the analysis of volatile components in a traditional Chinese medicinal preparation peptic powder which contains Rhizoma Atractylodis, Pericarpium Citri Reticulatae, Cortex Magnoliae Officinalis and Radix Glycyrrhizae. Ninety-three components were separated and 65 of them were qualitatively and quantitatively analyzed which represented about 90.28% of the total content. With the help of chemometric resolution, the data were resolved into a pure chromatogram and a mass spectrum of each chemical component. The accuracy of qualitative and quantitative results was greatly improved by using the two-dimensional comprehensive information of chromatograms and mass spectra. The example showed that chemometric resolution could greatly enhance separation ability. This makes it possible to analyze complicated practical systems like traditional Chinese medicinal preparations with the help of coupled instruments and chemometric resolution methods.