Facile modifications of a polyimide via chloromethylation. I. Novel synthesis of a new photosensitive polyimide

A soluble aromatic polyimide was chloromethylated via a reaction with chloromethyl methyl ether in the presence of tin(IV) chloride to produce a new starting material for the modification of aromatic polyimides. The chemical structure of the resulting polymer was confirmed by ¹H NMR and Fourier transform infrared spectroscopy. The maximum number of chloromethyl groups per repeat unit was 1.81. The chloromethylated polyimide was stable up to 250 °C and soluble in both chloroform and tetrahydrofuran. So that its utilization for further modification could be demonstrated, cinnamic acid was reacted with the formed polyimide, and it produced a new photosensitive polyimide with a cinnamoyl side chain. The photosensitivity of the resulting polyimide was investigated with ultraviolet spectroscopic methods. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 22–29, 2003     

Electrochemical and Electrochromic Properties of Ni Oxide Thin Films Prepared by a Sol–Gel Method

Nickel oxide thin films, which are well known anodic coloration materials that are used in electrochromic devices, were prepared by a sol–gel method, and their electrochemical and electrochromic properties were investigated. The sol was prepared from Ni(OH)₂ powder with an average size of 7 nm, in a mixture of ethylene glycol and absolute ethanol. The films were coated on an ITO substrate using the powder, dispersed in the solution. When additive materials, acetyl acetone and glycerol, were added to the sol its hardness and adhesion properties were improved. The optimized thin film formed an amorphous, porous structure, and showed a large current density during continuous potential and pulse potential cycling. The film also was transparent and had a high coloration efficiency (33.5 cm²/C) and a rapid response time (1.0–2.5 s) during the coloring/bleaching process.     

Soluble factor from tumor cells induces heme oxygenase-1 by a nitric oxide-independent mechanism in murine peritoneal macrophages

Tumor target-derived soluble secretary factor has been known to influence macrophage activation to induce nitric oxide (NO) production. Since heme oxygenase-1 (HO-1) is induced by a variety of conditions associated with oxidative stress, we questioned whether soluble factor from tumor cells induces HO-1 through NO-dependent mechanism in macrophages. We designated this factor as a tumor-derived macrophage-activating factor (TMAF), because of its ability to activate macrophages to induce iNOS. Although TMAF alone showed modest activity, TMAF in combination with IFN-gamma significantly induced iNOS expression and NO synthesis. Simultaneously, TMAF induced HO-1 and this induction was slightly augmented by IFN-gamma. Surprisingly, however, induction of HO-1 by TMAF was not inhibited by the treatment with the highly selective iNOS inhibitor, 1400 W, indicating that TMAF induces the HO-1 enzyme by a NO-independent mechanism. While rIFN-gamma alone induced iNOS, it had no effect on HO-1 induction by itself. Collectively, the current study reveals that soluble factor from tumor target cells induces HO-1 enzyme in macrophages. However, overall biological significance of this phenomenon remains to be determined.     

Spectroscopic characterization and preparation of low molecular,water‐soluble chitosan with free‐amine group by novel method

Low molecular, water‐soluble chitosan (LMWSC) with a free amine group was prepared by the novel salts‐removal method described in this study. A weight‐average molecular weight and degree of deacetylation (DDA) of LMWSC were determined by viscometry and Kina titration, resulting in 18,579 Da and 93% DDA, respectively. In the Fourier transform infrared spectroscopic, ¹H NMR, and ¹³C NMR spectra the absorption band by the carboxyl group derived from lactic acid and the impurities formed in the enzymatic process disappeared or were significantly lower than that of the control chitosan. Also, from the ¹H NMR and ¹³C NMR spectra the empirical value for the area ratio of the proton and carbon corresponds nearly to its theoretical values. The matrix‐assisted laser desorption/ionization time‐of‐flight mass spectrum identified the difference in the two adjacent peaks as 161. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 3796–3803, 2002     

Relationships between molecular structure and thermomechanical properties of bio‐based thermosetting polymers

Molecular dynamics simulations are used to study highly cross‐linked epoxy networks comprised of furanyl epoxy monomer, 2,5‐bis[(2‐oxiranylmethoxy)methyl]‐furan (BOF), that is cross‐linked by two furanyl amine hardeners, 5,5'‐methylenedifurfurylamine (DFDA) and 5,5'‐ethylidenedifurfirylamine (CH₃‐DFDA). Important properties of these fully furan‐based systems, including room temperature density, glass transition temperature, and Young's modulus are found to agree with previous experimental results. We also compare the simulated and experimental values of four fully furan‐based thermosetting materials to those using the conventional resin diglycidyl ether of bisphenol A (DGEBA) cured with the two furanyl hardeners. Our simulation results predict a slight decrease in density and Young's modulus, but no impact on the glass transition temperature, upon adding the methyl group in DFDA. Detailed analyses of the MD trajectories reveal the underlying mechanisms responsible for the observed structure/property relations, which center on the lack of collinear covalent bonds in the BOF molecular structure. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2017 , 55, 285–292     

Structural and luminescence properties of [Ln(ODA)(phen)·4H2O] complexes (Ln=Sm and Dy, ODA=oxydiacetate, phen=1,10-phenanthroline)

Two novel complexes of Sm(III) and Dy(III) with mixed oxydiacetate (ODA) and 1,10-phenanthroline (phen) ligands were synthesized and their structure and luminescence properties were characterized. The complexes of [Ln(ODA)(phen)·4H₂O]Cl·5H₂O [Ln=Sm and Dy] crystallize in the monoclinic space group P2₁/n with Sm: a=12.3401(14) Å, b=16.821(2), c=12.6847(11) Å, β=107.939(10)°, V=2505.0(5) Å³, Z=4 and ρ=1.841 mg/m³, and with Dy: a=12.289(7) Å, b=16.805(6) Å, c=12.705(4) Å, β=108.144(18)°, V=2493.4(19) Å³, Z=4 and ρ=1.786 mg/m³. The complexes of [Sm(ODA)(phen)·4H₂O]⁺ and [Dy(ODA)(phen)·4H₂O]⁺ excited by UV light produce orange red and lightly white emissions, respectively, via the nonradiative energy transfer from phen to the metals. The quantum yield of the sensitized luminescence of [Dy(ODA)(phen)·4H₂O]⁺ (Q=19%) is much greater than that of [Sm(ODA)(phen)·4H₂O]⁺ (Q=1.4%). The luminescence decay times of the complexes were in a few microsecond range and independent of temperature.