Multielemental characterisation of cobalt by glow discharge quadrupole mass spectrometry

Multielemental determination and the assessment of purity of cobalt metal used in the preparation of Ni-based super-alloys have been carried out by glow discharge quadrupole mass spectrometry (GD-QMS). Relative sensitivity factors (RSF) generated from certified iron matrix reference samples (NIST 663 and 664 low alloy steel pin standards) could be used for the determination of different trace element constituents of the sample. Different wet chemical procedures were also carried out for the determination of the trace constituents in the sample. The GD-QMS results are in reasonably good agreement with those obtained from wet chemical procedures, validating the use of the RSF values generated on low alloy steel standards for the computation of trace element concentrations in cobalt metal. A variety of molecular ions formed through the reaction of cobalt (matrix) with the discharge gas (argon) were also detected.     

Inorganic oxide core, polymer shell nanocomposite as a high K gate dielectric for flexible electronics applications

Organic/inorganic core shell nanoparticles have been synthesized using high K TiO(2) as the core nanoparticle, and polystyrene as the shell. This material is easy to process and forms transparent continuous thin films, which exhibit a dielectric constant enhancement of over 3 times that of bulk polystyrene. This new dielectric material has been incorporated into capacitors and thin film transistors (TFTs). Mobilities approaching 0.2 cm(2)/V.s have been measured for pentacene TFTs incorporating the new TiO(2) polystyrene nanostructured gate dielectric, indicating good surface properties for pentacene film growth. This novel strategy for generating high K flexible gate dielectrics will be of value in improving organic and flexible electronic device performance.     

Studies in oxidation-reduction reactions: Oxidation with chloramine-b indirect determinations

Chloramine-B has been used as an oxidizing agent in hydrochloric acid medium for the indirect volumetric estimations of hydrogen peroxide, lead dioxide, manganese dioxide, selenium dioxide, sodium formate, sodium sulphide, sodium metavanadate, potassium iodate and copper sulphate using iodine monochloride as a catalyst and pre-oxidiser. Chloroform is used as an indicator. It is coloured pink owing to the liberation of iodine during the titration and becomes light pale yellow at the end-point because of the formation of iodine monochloride.     

Extraction spectrophotometric determination of cobalt and nickel using ethylthioxanthate

A spectrophotometric method for the determination of cobalt and nickel using a new reagent sodium ethylthioxanthate has been described. The yellow-colored cobalt complex and red-colored nickel complex have been extracted quantitatively using carbon tetrachloride in the pH ranges 4.0–11 and 4.0–6.7, respectively. The colors of these complexes are stable and absorbances have been measured at 389 nm for cobalt and 495 nm for the nickel complexes. Few ions interfere but the method has been applied successfully for the determination of these metal ions in various complex materials.     

Effect of excess AgO and EDTA on the redox titration involved in potentiometric determination of plutonium

Attempts to carry out potentiometric determination of plutonium (by AgO-oxidation method) following the determination of thorium (by complexometric EDTA titration) gave positively biased irreproducible values of plutonium. In order to understand the factors leading to the erroneous values of plutonium, the effect of varying amounts of AgO and EDTA on redox [Fe(II)/K₂Cr₂O₇] titration in the medium consisting of 1M H₂SO₄ and 0,4M HNO₃ was studied. When AgO (up to 200 mg) was added in the titration medium and destroyed by sulfamic acid prior to the redox titration, the dichromate tittre value (amount of standard K₂Cr₂O₇ solution equivalent to 1 g of Fe(II) solution) showed negative bias. The bias was found to decrease with increase in time interval between AgO destruction and the redox titration. The presence of EDTA (up to 15 mg) gave positive bias in the titre value. Results on the titre values obtained under different conditions of the aqueous medium indicated the possibility of formation of unstable Ag(II)-sulfamic acid compled, which is probably responsible for the irreproducible values of plutonium.     

A titrimetric method for the sequential determination of thorium and plutonium

A method for the sequential determination of thorium and plutonium has been developed. In the sample solution containing thorium and plutonium, thorium is first determined by complexometric titration with EDTA and then in the same solution plutonium is determined by redox titration employing potentiometry. Prior to the determination of plutonium, EDTA is destroyed by fuming with concentrated HClO₄. Thorium is determined at 10 mg level and plutonium at 1 mg level with precision and accuracy of better than ±0.5%.     

Addition Compounds of Organotin halides. III. Adducts of n-propyl tin Trichloride with Amines

n-Propyl tin trichloride and its complexes with bases as pyridine, α, β-and γ-picolines, isoquinoline, piperidine, morpholine, aniline and benzylamine have been prepared. The complexes have been characterised by their I.R. and molar conductance measurements. Assignments for some I.R. frequencies have been reported and discussed. Molar conductance values of some of the complexes in nitrobenzene categories them to be uni-univalent electrolytes.     

Complexometric determination of thorium in ThO2−PuO2

A method based on the complexometric titration of thorium using ethylene diaminetetra-acetic acid (EDTA) as complexant has been developed for the determination of thorium in thorium-plutonium solution without resorting to prior separation of plutonium. Plutonium in the form of Pu(VI) does not affect the thorium determination when present up to 10% in thorium—plutonium solution. For oxidation of plutonium to Pu(VI), HClO₄ or AgO was used. HClO₄ is preferred. The thorium values obtained without prior separation of plutonium are compared with those obtained after separating plutonium by anion exchange technique. A precision of ±0.5% has been obtained for 5–10 mg of thorium in the aliquot.     

A titrimetric method for the sequential determination of thorium and uranium

A method for the sequential determination of thorium and uranium has been developed. In the sample solution containing thorium and uranium, thorium is first determined by complexometric titration with ethylenediaminetetraacetic acid (EDTA) and then in the same solution uranium is determined by redox titration employing potentiometry. As EDTA interferes in uranium determination giving positive bias, it is destroyed by fuming with HClO₄ prior to the determination of uranium. A precision and accuracy of better than ±0.15% is obtained for thorium at 10mg level and uranium ranging from 5 mg to 20 mg in the aliquot.