Reactions of Tris(acetonitrile)tricarbonylchromium with Trimethylsilylarenes

The reactions of tris(acetonitrile)tricarbonylchromium 1 with trimethylsilyl derivatives 2–5 of phenalene, indene, 1,2-dihydronaphthalene and trans-β-methylstyrene gave products 10-13, respectively, containing no trimethylsilyl groups. The reactions of 1 with trimethylsilyl derivatives 6–8 of benzene, toluene and cycloheptatriene gave products 14–16, respectively, containing trimethylsilyl groups. The reaction of 1 with 1,2-bis(trimethylsily-1,2-dihydro)naphthalene 9 gave product 17 in which only trimethylsilyl at the allylic position was cleaved. Compound 10 crystallizes in the orthorhombic system, space group Pbca, with a = 12.228(4), b = 14.288(1), c = 15.128(3) Å, Z = 8, R_F= 0.046, and R_w = 0.047. X-ray crystallographic data confirm that the Cr(CO)₃ moiety is bonded to phenalene in a η⁶-mold.     

Differences in the electrorheological response of a particle suspension under direct current and alternating current electric fields

We have observed an unusual reduction of shear stress with increasing shear rate under direct current electric fields, for an electrorheological fluid composed of sulfonated poly(styrene-co-divinylbenzene) particles dispersed in silicone oil. At all shear rates, the shear stress under the electric field is larger than that in the absence of the field, indicating that there is still some field-induced agglomeration of the particles. In contrast, the behavior under alternating current electric fields is the Bingham-fluid-type response commonly observed with electrorheological fluids. It is suggested that the conventional dipole–dipole interaction approach based on simplified microstructural models would be unable to explain these phenomena. Received: 27 November 2000 Accepted: 22 May 2001     

Palladium(II) and platinum(II) complexes of Schiff bases derived from 2,6-diacetylpyridine and S-methyldithiocarbazate and the X-ray crystal structure of the [Pd(mdapsme)Cl] complex

Condensation of 2,6-diacetylpyridine (dap) with S-methyldithiocarbazate (smdtc) in a 1:2 molar ratio yields a bicondensed pentadentate Schiff base (H₂dapsme) which reacts with K₂MCl₄ (M = Pd^II, Pt^II) giving stable complexes of empirical formula, [M(dapsme)] · 0.5Me₂CO. These complexes have been characterized by a variety of physico-chemical techniques. Condensation of dap with smdtc in a 1:1 molar ratio also yields the bicondensed Schiff base (H₂dapsme) as the major product, but a mono-condensed one-armed Schiff base (Hmdapsme) is also obtained as a minor product. The latter reacts with K₂PdCl₄ in an EtOH–H₂O mixture yielding a crystalline complex of empirical formula, [Pd(mdapsme)Cl], the crystal structure of which has been determined by X-ray diffraction. The complex has a distorted square-planar structure in which the ligand is coordinated to the palladium(II) ion as a uninegatively charged tridentate chelating agent via the pyridine nitrogen atom, the azomethine nitrogen atom and the thiolate sulfur atom; the oxygen atom of the acetyl group does not participate in coordination.     

Microstructural and mechanical analysis of Cu and Au interconnect on various bond pads

Effects of High Temperature Storage (HTS) and bonding toward microstructure change of intermetallic compound (IMC) at the wire bonding interface of 3 types of bond pad (Al, AlSiCu and NiPdAu) were presented in this paper. Optical and electron microscope analyses revealed that the IMC growth rate of samples under 175 and 200 °C HTS increased in the order of Al > AlSiCu > NiPdAu. Besides, higher HTS and bonding temperatures also promoted higher IMC thickness. The compositional study showed that higher HTS and bonding temperature developed rapid interdiffusion in bonding interface. In the mechanical ball shear test, a decrease of the shear force of Al and AlSiCu bond pads after 500 h HTS was believed due to poorly developed IMC at bonding interface. On the other hand, shear force degradation at 1000 h was due to excessive growth of IMC that in turn causes the formation of defects. For NiPdAu bond pad, increasing trend of shear force with HTS duration at 175 °C implied a good reliability of the Cu wire bonding. The rapid microscopic inspection on Cu wired Al bond pad under HTS 175 °C showed the IMC development from the periphery to the center of the ball bond. However, after 500 h voids started to develop until the crack was observed at 1000 h.     

The application of an in situ karyotyping technique for mesenchymal stromal cells: a validation and comparison study with classical G-banding

The cytogenetic analysis of mesenchymal stromal cells (MSCs) is essential for verifying the safety and stability of MSCs. An in situ technique, which uses cells grown on coverslips for karyotyping and minimizes cell manipulation, is the standard protocol for the chromosome analysis of amniotic fluids. Therefore, we applied the in situ karyotyping technique in MSCs and compared the quality of metaphases and karyotyping results with classical G-banding and chromosomal abnormalities with fluorescence in situ hybridization (FISH). Human adipose- and umbilical cord-derived MSC cell lines (American Type Culture Collection PCS-500-011, PCS-500-010) were used for evaluation. The quality of metaphases was assessed by analyzing the chromosome numbers in each metaphase, the overlaps of chromosomes and the mean length of chromosome 1. FISH was performed in the interphase nuclei of MSCs for 6q, 7q and 17q abnormalities and for the enumeration of chromosomes via oligo-FISH in adipose-derived MSCs. The number of chromosomes in each metaphase was more variable in classical G-banding. The overlap of chromosomes and the mean length of chromosome 1 as observed via in situ karyotyping were comparable to those of classical G-banding (P=0.218 and 0.674, respectively). Classical G-banding and in situ karyotyping by two personnel showed normal karyotypes for both cell lines in five passages. No numerical or structural chromosomal abnormalities were found by the interphase-FISH. In situ karyotyping showed equivalent karyotype results, and the quality of the metaphases was not inferior to classical G-banding. Thus, in situ karyotyping with minimized cell manipulation and the use of less cells would be useful for karyotyping MSCs.     

A simple microextraction and preconcentration approach based on a mixed matrix membrane

A simple adsorption/desorption procedure using a mixed matrix membrane (MMM) as extraction medium is demonstrated as a new miniaturized sample pretreatment and preconcentration technique. Reversed-phase particles namely polymeric bonded octadecyl (C₁₈) was incorporated through dispersion in a cellulose triacetate (CTA) polymer matrix to form a C₁₈-MMM. Non-steroidal anti-inflammatory drugs (NSAIDs) namely diclofenac, mefenamic acid and ibuprofen present in the environmental water samples were selected as targeted model analytes. The extraction setup is simple by dipping a small piece of C₁₈-MMM (7 mm × 7 mm) in a stirred 10 mL sample solution for analyte adsorption process. The entrapped analyte within the membrane was then desorbed into 100 μL of methanol by ultrasonication prior to high performance liquid chromatography (HPLC) analysis. Each membrane was discarded after single use to avoid any analyte carry-over effect. Several important parameters, such as effect of sample pH, salting-out effect, sample volume, extraction time, desorption solvent and desorption time were comprehensively optimized. The C₁₈-MMM demonstrated high affinity for NSAIDs spiked in tap and river water with relative recoveries ranging from 92 to 100% and good reproducibility with relative standard deviations between 1.1 and 5.5% (n = 9). The overall results obtained were found comparable against conventional solid phase extraction (SPE) using cartridge packed with identical C₁₈ adsorbent.     

Full-field heterodyne interference microscope with spatially incoherent illumination

A heterodyne interference microscope arrangement for full-field imaging is described. The reference and object beams are formed with highly correlated, time-varying laser speckle patterns. The speckle illumination confers a confocal transfer function to the system, and by temporal averaging, the coherence noise that often degrades coherent full-field microscope images is suppressed. The microscope described is similar to a Linnik-type microscope and allows the use of high-numerical-aperture objective lenses, but the temporal coherence of the illumination permits the use of a low-power achromatic doublet in the reference arm. The use of a doublet simplifies alignment of the microscope and can reduce the cost. Preliminary results are presented that demonstrate full-field surface height precision of 1 nm rms.     

Templating and supersaturation-driven anti-templating: principles of biomineral architecture

The structural synergy between biominerals (CaCO(3), hydroxyapatite) and biosubstrates were examined for the first time. The templating effect of substrate and a newly identified supersaturation-driven interfacial structure mismatch effect were identified in the context of a new nucleation model. It follows that the heterogeneous nucleation which corresponds to a good structural match and synergy between biominerals and substrates will promote an ordered, compact, and tough complex biomineral structure, and occur only at low supersaturations, whereas at high supersaturations the heterogeneous nucleation associated with a poor structural match and synergy between biominerals and substrates will become dominant due to supersaturation-driven interfacial structural mismatch. The latter normally results in a disordered and porous structure. A phenomenon, so-called microgravity-driven homogeneous nucleation, was also examined. It turns out that microgravity will suppress convection and consequently promote homogeneous-like nucleation during biomineralization. This could be responsible for microgravity-induced osteoporousis.     

Rapid and direct determination of glyphosate,glufosinate, and aminophosphonic acid by online preconcentration CE with contactless conductivity detection

Rapid and direct online preconcentration followed by CE with capacitively coupled contactless conductivity detection (CE‐C⁴D) is evaluated as a new approach for the determination of glyphosate, glufosinate (GLUF), and aminophosphonic acid (AMPA) in drinking water. Two online preconcentration techniques, namely large volume sample stacking without polarity switching and field‐enhanced sample injection, coupled with CE‐C⁴D were successfully developed and optimized. Under optimized conditions, LODs in the range of 0.01–0.1 μM (1.7–11.1 μg/L) and sensitivity enhancements of 48‐ to 53‐fold were achieved with the large volume sample stacking‐CE‐C⁴D method. By performing the field‐enhanced sample injection‐CE‐C⁴D procedure, excellent LODs down to 0.0005–0.02 μM (0.1–2.2 μg/L) as well as sensitivity enhancements of up to 245‐ to 1002‐fold were obtained. Both techniques showed satisfactory reproducibility with RSDs of peak height of better than 10%. The newly established approaches were successfully applied to the analysis of glyphosate, glufosinate, and aminophosphonic acid in spiked tap drinking water.