Adsorption of anionic dyes on chitosan beads. 1. The influence of the chemical structures of dyes and temperature on the adsorption kinetics

In this work, chitosan beads were synthesized in acidic medium and cross-linked in 1% glutaraldehyde solution. The characterization of the materials using TG/DTG, XRD, and BET surface areas showed that the beads did not modify their characteristics after the cross-linking reaction. The cross-linked beads were utilized as adsorbents for the removal of the yellow-, blue-, and red-anionic reactive dyes from aqueous solutions at pH 2.0. Adsorption of the yellow-dye increased from 25 to 50 degrees C. However, adsorption of the blue-dye decreased from 25 to 50 degrees C. Interestingly, the adsorption of the red-dye decreased from 25 to 35 degrees C and increased from 45 to 50 degrees C. The kinetic data were evaluated using an Avrami kinetic model, where the parameter n was related to the determination of changes in the adsorption mechanisms. Adsorption data of the dyes in relation to the contact time, the chemical structures of the dyes, and temperature were presented and were discussed.     

Multistep adsorption of anionic dyes on silica/chitosan hybrid. 1. Comparative kinetic data from liquid- and solid-phase models

In this work, a hybrid silica/chitosan was synthesized and characterized by nitrogen elemental analysis and thermal analysis (TG, DTG, DTA, and DSC) and BET surface area. The hybrid was used in adsorption studies of two anionic dyes from aqueous solutions. A rise of temperature accelerates mass transfer of dyes into the hybrid. However, the maximum adsorption capacities reach similar values from 25 to 55 degrees C. The kinetic data were first evaluated in relation to the decrease of the time-related residual concentration of the dyes in solution, where the second-order model has presented the best fitting. The solid-phase interaction of dye data presents a rough fitting to the traditional first-order Lagergren kinetic model. However, a modified Avrami kinetic equation was successfully fitted to the kinetic quantities, where from five to seven kinetic regions were found. A pore-diffusion model has also demonstrated that the diffusion is the rate-controlling interaction mechanism. However, the experimental-calculated comparative values are the best way to evaluate a specific aqueous- or solid-phase kinetic model.     

New Factorial Designs to Evaluate Chemisorption of Divalent Metals on Aminated Silicas

Adsorption processes of Cu(II), Co(II), and Hg(II) on two aminated silica gel surfaces with immobilized ethylenediamine and diethylenediamine groups were studied by a new 2(3) full factorial design. Two metal quantity levels, temperatures of 25 and 50 degrees C, and silica amounts of 100 and 200 mg were employed. Our study indicates that higher factorial design levels increase adsorption for all metals evaluated, with the exception of the mass parameter. Adsorption is also significantly affected by important antagonistic and synergistic effects involving all factors. Both functionalized silica gel surfaces present higher interactions and good perspectives in preconcentration studies for mercury. The factorial design results are also discussed in terms of some solvation properties for each of the metals studied. Copyright 2001 Academic Press.     

The impact of the natural sciences on archaeology

This article reviews some of the applications of physics to the solution of archaeological problems. The use of magnetic, resistivity and electromagnetic surveying techniques for the location of buried features is described. Various methods of age determination are outlined while the problems associated with radiocarbon dating of organic material and thermoluminescent dating of pottery are discussed in detail. The techniques, including petrological examination, chemical analysis and isotopic analysis, employed in the physical examination of archaeological artefacts are described. Examples of the application of these techniques in establishing the source of the raw materials used in pottery, metal and stone implements and in elucidating the techniques of manufacture of pottery and metal objects are also given.     

Aggregation and adsorption of reactive dyes in the presence of an anionic surfactant on mesoporous aminopropyl silica

A surface tension technique was used to determine the critical aggregation concentration (cac) of a yellow and a red dye in relation to the presence of the anionic surfactant sodium dodecylbenzene sulfonate (DBS) and to temperature changes in buffered aqueous solutions. The cac values of the yellow dye increase from 25 to 45 degrees C (from 41.37 to 50.32 mg L-1) and decrease from 45 to 55 degrees C (from 50.32 to 38.72 mg L-1). The cac values for the red dye/DBS aggregates decrease (from 124.52 to 88.50 mg L-1) from 25 to 55 degrees C. Adsorption of the two dyes onto a mesoporous aminopropyl silica (Sil-NH2) was also studied. The adsorption of the yellow dye increases with an increase in temperature from 25 to 55 degrees C. In the presence of DBS the adsorption on Sil-NH2 for the yellow dye decreases, and for the red dye increases from 25 to 55 degrees C. Adsorptions occurred below and above the cac of the anionic dyes/DBS aggregates. Adsorption of the dyes onto Sil-NH2 fitted well to the Langmuir, Freundlich, and Redlich-Peterson adsorption models. However, in the presence of DBS, only the Freundlich model fit the experimental adsorption data at low dye concentrations (less than 400 mg L-1). In this case, the Redlich-Peterson model was only fitted to the red dye adsorption data. The magnitude of the Dubinin-Radushkevich energetic parameters (E, from 7.00 to 15.00 kJ mol-1) indicates that the adsorption of the dyes onto Sil-NH2, in the absence and in the presence of DBS, is controlled by water adsorbed/dye in solution ion-exchange interactions. It is observed that the values of DeltaadsH are positive for both dyes and the values are quite similar to each other. The exception is the adsorption of the yellow dye in the presence of DBS, which is slightly exothermic. The DeltaadsG values are all negative. However, the interactions of the dyes with Sil-NH2 silica are more spontaneous in the presence of the surfactant. The positive adsorption entropy values (DeltaadsS) for the interaction of the dyes suggest that entropy is a driving force of the dye adsorptions. However, the entropic contribution is higher for the adsorptions in the presence of DBS. It was suggested that the chemical structures of the dyes play an important role in the formation of the dye/DBS aggregates and in dye adsorption onto the aminopropyl silica.     

Interactions of anionic dyes with silica-aminopropyl 1. A quantitative multivariate analysis of equilibrium adsorption and adsorption Gibbs free energies

In this work silica-aminopropyl (Sil-NH2) was synthesized and employed to evaluate the quantitative roles of temperature, pH, dye concentration, and Hg(II) or anionic surfactant SDB interferents in the adsorptions of blue and red remazol dyes in aqueous medium using four distinct 2(4) factorial designs. The results were analyzed statistically using multiple regressions, Student's t-test, analysis of variance, and F-test. Polynomial modelings were used to define the most important factors affecting dye adsorption. The results indicate that the principal effects of dye concentration and pH, as well as most of the interactions of all factors, are statistically very important in relation to the equilibrium adsorption quantities. However, the adsorption Gibbs free energies are influenced, in general, only by pH, dye concentration, and some binary interactions. Temperature changes do not affect the deltaG values significantly.     

Phenolic compounds,essential oil composition,and antioxidant activity of Angelica purpurascens (Avé-Lall.) Gill

In this study, methanol extracts (MEs) and essential oil (EO) of Angelica purpurascens (Avé-Lall.) Gill obtained from different parts (root, stem, leaf, and seed) were evaluated in terms of antioxidant activity, total phenolics, compositions of phenolic compound, and essential oil with the methods of 2,2-azino-bis(3ethylbenzo-thiazoline-6-sulfonic acid (ABTS•⁺), 2,2-diphenyl-1-picrylhydrazil (DPPH•) radical scavenging activities, and ferric reducing/antioxidant power (FRAP), the Folin–Ciocalteu, liquid chromatography−tandem mass spectrometry (LC−MS/MS), and gas chromatography-mass spectrometry (GC−MS), respectively. The root extract of A. purpurascens exhibited the highest ABTS•⁺, DPPH•, and FRAP activities (IC₅₀: 0.05 ± 0.0001 mg/mL, IC₅₀: 0.06 ± 0.002 mg/mL, 821.04 ± 15.96 µM TEAC (Trolox equivalent antioxidant capacity), respectively). Moreover, EO of A. purpurascens root displayed DPPH• scavenging activity (IC₅₀: 2.95 ± 0.084 mg/mL). The root extract had the highest total phenolic content (438.75 ± 16.39 GAE (gallic acid equivalent), µg/mL)). Twenty compounds were identified by LC−MS/MS. The most abundant phenolics were ferulic acid (244.39 ± 15.64 μg/g extract), benzoic acid (138.18 ± 8.84 μg/g extract), oleuropein (78.04 ± 4.99 μg/g extract), and rutin (31.21 ± 2.00 μg/g extract) in seed, stem, root, and leaf extracts, respectively. According to the GC−MS analysis, the major components were determined as α-bisabolol (22.93%), cubebol (14.39%), α-pinene (11.63%), and α-limonene (9.41%) among 29 compounds. Consequently, the MEs and EO of A. purpurascens can be used as a natural antioxidant source.     

Transition Metal Ion-binding Properties of a 14-Membered N2O2S2- Macrobicyclic Ligand

The selective liquid–liquid extraction of various transition metal cations from the aqueous phase to the organic phase was carried out using a 14-membered N₂O₂S₂-macrobicycle. Metal picrates such as Pb²⁺, Co²⁺, Zn²⁺, Ni²⁺,Cu²⁺ and Cd²⁺ were used in this extraction studies. It was found that the ligand showed moderate selectivity towards Pb²⁺ only among the other metals. The extraction constant (log K _ex) was determined to be 13.8 for Pb²⁺ complex.     

Evaluation of tg data of htpb-based polyurethanes

Thermogravimetry (TG) was used to provide some new information on some polybutadiene-based polyurethanes. The results showed two main mass decomposition stages, from 230 to 564°C. The first mass loss stages were used to quantify the hard segments of the polymers. The results correlated well with the ASTM methodology. In addition, two 2³ factorial design studies were applied to evaluate the importance of some selected factors on the TG results of the polyurethanes. This revised version was published online in August 2006 with corrections to the Cover Date.