Actinide heterobimetallic oxides (Th, U): reduction studies

In our laboratories we have been studying the synthesis and reactivity of binary actinide and lanthanide intermetallic compounds. In this work, the air-oxidation of ThCu₂ and AnNi₂ (An = Th, U) was followed by thermogravimetry (TG) and the products were characterized by X-ray powder diffraction (XRD). The heterobimetallic oxides obtained are described by the formulas 2MO·ThO₂ (M = Cu, Ni) and 2NiO·UO₃. The thermogravimetric analysis under hydrogen of these heterobimetallic oxides show one mass loss for 2MO·ThO₂ and two mass losses for 2NiO·UO₃ over a wide range of temperature (293–1273 K). The characterization by XRD shows that the reduction products are 2M·ThO₂ (M = Cu, Ni) and 2Ni·UO₂, with all the actinides in the 4+ oxidation state. The actinide heterobimetallic oxides were described as copper or nickel supported catalysts.     

Amidomethylation of amodiaquine: antimalarial N-Mannich base derivatives

Novel N-Mannich base-type derivatives of the antimalarial drug amodiaquine were synthesised by reaction with tertiary N-chloromethylamides. With the exception of the derivative of ethyl hippurate, all the so-formed (1-amidomethyl-1H-quinolin-4-ylidene)arylamines displayed high chemical and enzymatic stability. These compounds displayed antimalarial activity against the multi-drug resistant Plasmodium falciparum strain Dd2 (IC₅₀ values 15-31 nM) and demonstrated no significant loss in activity compared to amodiaquine (IC₅₀ 30 nM).     

Synthesis of tricyclic isoindoles and thiazolo[3,2-c][1,3]benzoxazines

The thermolysis of (3R,9bS)-5-oxo-2,3,5,9b-tetrahydrothiazolo[2,3-a]isoindole-3-carboxylic acids in Ac₂O led to novel 3-methylene-2,5-dioxo-3H,9bH-oxazolo[2,3-a]isoindoles and chiral (9bS)-5-oxo-2,3,5,9b-tetrahydrothiazolo[2,3-a]isoindoles were obtained on FVP. Starting from l-cysteine methyl ester (3R,10bR)-5-oxo-2,3-dihydro-10bH-[1.3]thiazolo[3,2-c][1,3]benzoxazines were obtained as single stereoisomers. The thermolysis of (3R,10bR)-5-oxo-2,3-dihydro-10bH-[1.3]thiazolo[3,2-c][1,3]benzoxazine-3-carboxylic acid in Ac₂O gave 5-acetyl-2-phenyl-2,3-dihydrothiazole. The structures of methyl (3R,9bS)-5-oxo-2,3,5,9b-tetrahydrothiazolo[2,3-a]isoindole-3-carboxylate 1a and methyl (2R,4R)-N-chlorocarbonyl-2-(2-hydroxyphenyl)thiazolidine-4-carboxylate 9 were determined by X-ray crystallography.     

Healable dual organic–inorganic crosslinked sol–gel based polymers: Crosslinking density and tetrasulfide content effect

In this article, the first generation of healable sol–gel based polymers is reported. A dual organic–inorganic crosslinked network is developed containing non‐reversible crosslinks and reversible (tetrasulfide) groups. The designed polymer architecture allows thermally induced mesoscale flow leading to damage closure followed by interfacial strength restoration due to reformation of the reversible groups. While the reversible bonds are responsible for the flow and the interface restoration, the irreversible crosslinks control the required mechanical integrity during the healing process. The temperature dependent gap closure kinetics is strongly affected by the crosslinking density and tetrasulfide content. Raman spectroscopy is used to explain the gap closure kinetics in air and dry nitrogen. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 1953–1961     

Gas‐phase interactions of organotin compounds with glycine

Gas‐phase interactions of organotins with glycine have been studied by combining mass spectrometry experiments and quantum calculations. Positive‐ion electrospray spectra show that the interaction of di‐ and tri‐organotins with glycine results in the formation of [(R)₂Sn(Gly)‐H]⁺and [(R)₃Sn(Gly)]⁺ ions, respectively. Di‐organotin complexes appear much more reactive than those involving tri‐organotins. (MS/MS) spectra of the [(R)₃Sn(Gly)]⁺ ions are indeed simple and only show elimination of intact glycine, generating the [(R)₃Sn]⁺ carbocation. On the other hand, MS/MS spectra of [(R)₂Sn(Gly)‐H]⁺complexes are characterized by numerous fragmentation processes. Six of them, associated with elimination of H₂O, CO, H₂O + CO and formation of [(R)₂SnOH]⁺ (?57 u),[(R)₂SnNH₂]⁺( ?58 u) and [(R)₂SnH]⁺ (?73 u), are systematically observed. Use of labeled glycines notably concludes that the hydrogen atoms eliminated in water and H₂O + CO are labile hydrogens. A similar conclusion can be made for hydrogens of [(R₂)SnOH]⁺and [(R₂)SnNH₂]⁺ions. Interestingly, formation [(R)₂SnH]⁺ ions is characterized by a migration of one the α hydrogen of glycine onto the metallic center. Finally, several dissociation routes are observed and are characteristic of a given organic substituent. Calculations indicated that the interaction between organotins and glycine is mostly electrostatic. For [(R)₂Sn(Gly)‐H]⁺complexes, a preferable bidentate interaction of the type η²‐O,NH2 is observed, similar to that encountered for other metal ions. [(R)₃Sn]⁺ ions strongly stabilize the zwitterionic form of glycine, which is practically degenerate with respect to neutral glycine. In addition, the interconversion between both forms is almost barrierless. Suitable mechanisms are proposed in order to account for the most relevant fragmentation processes. Copyright © 2013 John Wiley & Sons, Ltd.     

A useful approach for the differentiation of wines according to geographical origin based on global volatile patterns

In this study, the feasibility of solid‐phase extraction combined with gas chromatography and mass spectrometry in tandem with partial least squares discriminant analysis was evaluated as a useful strategy to differentiate wines according to geographical origin (Azores, Canary and Madeira Islands) and types (white, red and fortified wine) based on their global volatile patterns. For this purpose, 34 monovarietal wines from these three wine grape‐growing regions were investigated, combining the high throughput extraction efficiency of the solid‐phase extraction procedure with the separation and identification ability. The partial least squares discriminant analysis results suggested that Madeira wines could be clearly discriminated from Azores and Canary wines. Madeira wines are mainly characterized by 2‐ethylhexan‐1‐ol, 3,5,5‐trimethylhexan‐1‐ol, ethyl 2‐methylbutanoate, ethyl dl ‐2‐hydroxycaproate, decanoic acid, 3‐methylbutanoic acid, and (E)‐whiskey lactone, whereas 3‐ethoxypropan‐1‐ol, 1‐octen‐3‐ol, (Z)‐3‐hexenyl butanoate, 4‐(methylthio)‐1‐butanol, ethyl 3‐hydroxybutanoate, isoamyl lactate, 4‐methylphenol, γ‐octalactone and 4‐(methylthio)‐1‐butanol, are mainly associated with Azores and Canary wines. The data obtained in this study revealed that solid‐phase extraction combined with gas chromatography and quadrupole mass spectrometry data and partial least squares discriminant analysis provides a suitable tool to discriminate wines, both in terms of geographical origin as well as wine type and vintage.     

Direct Addition of Grignard Reagents to Aliphatic Carboxylic Acids Enabled by Bulky turbo-Organomagnesium Anilides

The synthesis of ketones through addition of organometallic reagents to aliphatic carboxylic acids is a straightforward strategy that is limited to organolithium reagents. More desirable Grignard reagents can be activated and controlled with a bulky aniline-derived turbo-Hauser base. This operationally simple procedure allows the straightforward preparation of a variety of aliphatic and perfluoroalkyl ketones alike from functionalized alkyl, aryl and heteroaryl Grignard reagents.     

Physico-chemical and anatomical characterization of residual lignocellulosic fibers

Anatomical and physico-chemical properties of residual natural fibers (sugarcane bagasse, coconut fibers and peanut hulls) were characterized in order to evaluate their potential for use in the production of particleboard. The bulk density was determined by helium pycnometer and the chemical characteristics by using an electronic pH meter (for pH determination) on fibers dissolved in acidic and neutral detergents (to determine the levels of cellulose, hemicellulose and lignin). The anatomical characteristics were established using scanning electron microscopy coupled with an X-ray detector system, as well as energy dispersive X-ray spectroscopy. Results indicated similarities and differences between physico-chemical and anatomical characteristics of the residual lignocellulosic fibers when compared with the Pinus sp. wood commercially employed in particleboard production. Bulk density and pH for residual lignocellulosic fibers and Pinus sp. wood presented analogous values. Similar amounts of cellulose and lignin were identified between waste fibers and Pinus sp. wood. The presence of silica was identified in coconut fiber, peanut hull and sugarcane bagasse waste fibers, and may affect the mechanical characteristics of panels. Coconut and sugarcane bagasse fibers show surface pores with diameters ranging from 1.2 to 2.1 μm, below the 5 μm identified for Pinus sp. wood. Both fibers present pores distributed over their entire surface, whereas peanut hull fibers have no pores on their surface. This characteristic contributes to resin dispersion among particles, reflecting positively on the physical–mechanical properties of the panels. Particleboards produced with residual lignocellulosic fibers present similar physical–mechanical properties to those of Pinus sp. wood panels.     

Probing Substrate/Catalyst Effects Using QSPR Analysis on Friedel-Crafts Acylation Reactions over Hierarchical BEA Zeolites

Attempts to optimize heterogeneous catalysis often lack quantitative comparative analysis. The use of kinetic modelling leads to rate (k) and relative sorption equilibrium constants (K), which can be further rationalized using Quantitative Structure-Property Relationships (QSPR) based on Multiple Linear Regressions (MLR). Friedel-Crafts acylation using commercial and hierarchical BEA zeolites as heterogeneous catalysts, acetic anhydride as the acylating agent, and a set of seven substrates with different sizes and chemical functionalities were herein studied. Catalytic results were correlated with the physicochemical properties of substrates and catalysts. From this analysis, a robust set of equations was obtained allowing inferences about the dominant factors governing the processes. Not entirely surprising, the rate and sorption equilibrium constants were found to be explained in part by common factors but of opposite signs: higher and stronger adsorption forces increase reaction rates, but they also make the zeolite active sites less accessible to new reactant molecules. The most relevant parameters are related to the substrates’ molecular size, which can be associated with different reaction steps, namely accessibility to micropores, diffusion capacity, and polarizability of molecules. The relatively large set of substrates used here reinforces previous findings and brings further insights into the factors that hamper/speed up Friedel-Crafts reactions in heterogeneous media.     

Improvement of permanent memory effect in PDLC films using TX-100 as an additive

A number of polymer dispersed liquid crystal (PDLC) films based on dimethacrylate monomers were synthesised by polymer-induced phase separation (PIPS) using polyethylene glycol p-(1,1,3,3-tetramethylbutyl)-phenyl ether (TX-100) as an additive up to total solution weight of 10% aiming to modify the initial anchorage force of the liquid crystal (LC) molecules to the polymeric matrix. The effects of the addition of this additive to the PDLC films were studied resorting to electro-optical studies. Using a fitting model, several parameters were correlated such as the permanent memory effect (PME), the voltage required to achieve 90% of maximum transmittance (E90), the average elastic constant (K) and the rotational viscosity of the director (γ). The use of TX-100 results on an increase on the PME and γ, and decrease on the E90 and K.