Unsteady axisymmetric stagnation flow on a circular cylinder

Unsteady, axisymmetric stagnation flow about a circular cylinderis examined when the far-field flow is a periodic function oftime with a fixed time average and an oscillatory part of prescribedamplitude and frequency. Solutions are computed for arbitraryvalues of the Reynolds number, quantifying the effects of surfacecurvature, and a frequency parameter based on the period ofthe far-field flow. It is found that solutions remain regularand periodic provided that the far-field amplitude lies belowa critical value. Above this value, solutions terminate in afinite-time singularity. The blow-up time is delayed by increasingthe curvature of the surface. These results are corroboratedby asymptotic predictions valid in the limits of small and largeamplitude and frequency. For large Reynolds number, the problemreduces to the two-dimensional stagnation-point flow againsta plane wall studied by previous authors.     

Purification of neutral protease by dye affinity chromatography

Twenty triazinic dyes were assayed as ligands for the chromatographic affinity purification of a neutral protease from Flavourzyme^™, a commercial preparation. Screening at pH 4.0 allowed the selection of eight dyes on the basis of their high protease adsorption. When the pH was set to 5.0 in order to increase selectivity, only Yellow HE-4R, Red HE-3B, and Cibacron Blue F3G-A maintained protease adsorption at high values. Neither maximum capacities nor dissociation constants calculated from isotherms measured at 8 and 25°C showed great differences. By contrast, a strong temperature effect was evidenced in the elution step: elution at 8°C allowed 70, 81, and 98% recovery of adsorbed protease with Yellow HE-4R, Red HE-3B, and Cibacron Blue F3G-A, respectively, whereas only 20% recovery was attained at 25°C. Based on the results obtained, a purification process for the neutral protease contained in Flavourzyme with Cibacron Blue F3G-A as the affinity ligand was developed, yielding 96% of electrophoretically pure enzyme in a single step, the specific activity rising from 850 to 3650 U/mg.     

Bovine lactoferrin purification from whey using Yellow HE‐4R as the chromatographic affinity ligand

The worldwide production of whey increases by around 186 million tons each year and it is generally considered as a waste, even when several whey proteins have important economic relevance. For its valorization, inexpensive ligands and integrated chromatography methods need to be developed for specific and low‐cost protein purification. Here, we describe a novel affinity process with the dye Yellow HE‐4R immobilized on Sepharose for bovine lactoferrin purification. This approach based on a low‐cost ligand showed an efficient performance for the recovery and purification of bovine lactoferrin directly from whey, with a yield of 71% and a purification factor of 61.     

Polyethylene glycol matrix reduces the rates of photochemical and thermal release of nitric oxide from S-nitroso-N-acetylcysteine

S -nitrosothiols have many biological activities and may act as nitric oxide (NO) carriers and donors, prolonging NO half-life in vivo. In spite of their great potential as therapeutic agents, most S -nitrosothiols are too unstable to isolate. We have shown that the S -nitroso adduct of N -acetylcysteine (SNAC) can be synthesized directly in aqueous and polyethylene glycol (PEG) 400 matrix by using a reactive gaseous (NO/O₂) mixture. Spectral monitoring of the S–N bond cleavage showed that SNAC, synthesized by this method, is relatively stable in nonbuf-fered aqueous solution at 25°C in the dark and that its stability is greatly increased in PEG matrix, resulting in a 28-fold decrease in its initial rate of thermal decomposition. Irradiation with UV light (λ= 333 nm) accelerated the rate of decomposition of SNAC to NO in both matrices, indicating that SNAC may find use for the photogeneration of NO. The quantum yield for SNAC decomposition decreased from 0.65 ± 0.15 in aqueous solution to 0.047 ± 0.005 in PEG 400 matrix. This increased stability in PEG matrix was assigned to a cage effect promoted by the PEG microenvironment that increases the rate of geminated radical pair recombination in the homolytic S–N bond cleavage process. This effect allowed for the storage of SNAC in PEG at −20°C in the dark for more than 10 weeks with negligible decomposition. Such stabilization may represent a viable option for the synthesis, storage and handling of S -nitrosothiol solutions for biomedical applications.     

Blends of natural and synthetic polymers: A new route to novel biomaterials

Blends of natural and synthetic polymers were studied for potential applications in the biomedical field. Collagen and hyaluronic acid were mixed in aqueous solution with poly(vinyl alcohol) and poly(acrylic acid). The properties of the blends were studied by differential scanning calorimetry and dynamic mechanical thermal analysis. Some methods were also investigated to enhance the miscibility of the polymers in these blends.     

Foot and mouth disease virus concentration and purification by affinity chromatography

Foot and mouth disease virus, (FMDV) from a crude cell lysate was purified in a single step by affinity chromatography with heparin as a ligand. The virus eluted from an Heparin-Ultrogel A₄R column at 1M sodium chloride in 10 mM sodium phosphate buffer, pH 7.0, while most cell protein and albumin did so at lower concentrations of sodium chloride in the same buffer. Purity of the eluted fraction containing the virus was assessed by SDS-PAGE, HPLC, ultracentrifugation, and UV absorption spectrum. With this method, intact viral particles are recovered in high yield (over 90%) and specific virus purity increases nearly 1000-fold. The capacity of the Chromatographic matrix for the virus was found to be 1.1 mg viral mass per mL of hydrated gel.     

Thermal,XRD and spectrophotometric study on artificially degraded woods

Thermogravimetry, differential thermal analysis, differential scanning calorimetry in oxygen flux were used to characterize two wood types: fir and chestnut woods. They were characterized by the peak temperatures of DTA, DTG and DSC curves and by the different mass losses evaluated on the basis of the measured thermal data. The samples were woods in powder obtained during sawing. Complementary characterization of the woods was performed by estimating the crystallinity of cellulose by means of X-ray powder diffraction. In order to simulate the degradation of wet woods, fir and chestnut woods were put into deionised water and into artificial sea water for several weeks; some samples of woods contained Cu and Fe nails to ascertain the effect of these metals on the degradation process. The thermal and X-ray diffraction measurements were then performed on the wet woods, following the same previous procedure. X-ray fluorescence was used to investigate the penetration of metals into wood samples.     

Gelatin/PLLA sponge-like scaffolds allow proliferation and osteogenic differentiation of human mesenchymal stromal cells

Tissue engineering has the potential to supply constructs capable of restoring the normal function of native tissue following injury. Poly(L-lactic acid) (PLLA) scaffolds are amongst the most commonly used biodegradable polymers in tissue engineering and previous studies performed on ovine fibroblasts have showed that addition of gelatin creates a favorable hydrophilic microenvironment for the growth of these cells. The attractiveness of using mesenchymal stromal cells (MSCs) in tissue regeneration is that they are able to differentiate into several lines including osteoblasts. In this study, we investigated the ability of gelatin/PLLA sponges to support the adhesion, proliferation, and osteogenic differentiation of human MSCs isolated from the bone marrow of four donors. [Figure: see text].