Synthetische und NMR-spektroskopische Untersuchungen der Benzylaminaddition an N-Maleyl-aminosäurederivate

Summary During the addition of amines to maleylamino acids in general -amino derivatives are formed. In order to change the reactivity within the vinylogous maleyl system we introduced the -benzylester group into the starting compound N-(cis--carboxyacryloyl)-phenylalanine methylester1. The obtained benzylester2 is adding benzylamine in -position yielding N-benzyl--aspartyl(-benzyl)-phenylalanine methylester4. The addition reaction was investigated by¹H-NMR-spectroscopy. The structures of the compounds have been confirmed by elemental analysis, IR,¹H-NMR and¹³C-NMR spectroscopy.

     

Bestimmung von Wasser in Dichloressigsäure

Water concentrations in dichloroacetic acid in the range of 0<C <1 % (C = percent by weight) can be determined directly by photometry at 1425 nm. The absorbance A at this maximum is described by the function A=1.267×C^0.93 (cell path d=5 cm, correlation coefficient r=0.997). The variation coefficient for water concentrations of ≈0.06% was found to be V=6.5%.     

Self-assembly of amphiphilic hexapyridinium cations at the air/water interface and on HOPG surfaces.

Mono- and multilayers of a novel amphiphilic hexapyridinium cation with six eicosyl chains (3) are spread at the air/water interface as well as on highly ordered pyrolytic graphite (HOPG). On water, the monolayer of 3 is investigated by recording surface pressure/area and surface potential/area isotherms, and by Brewster angle microscopy (BAM). Self-organized tubular micelles with an internal edge-on orientation of molecules form at the air/water interface at low surface pressure whereas multilayers are present at high surface pressure, after a phase transition. Packing motifs suggesting a tubular arrangement of the constituting molecules were gleaned from atomic force microscopy (AFM) investigations of Langmuir-Blodgett (LB) monolayers being transferred on HOPG at different surface pressures. These LB film structures are compared to the self-assembled monolayer (SAM) of 3 formed via adsorption from a supersaturated solution, which is studied by scanning tunnelling microscopy (STM). On HOPG the SAM of 3 consists of nanorods with a highly ordered edge-on packing of the aromatic rings and an arrangement of alkyl chains which resembles the packing of molecules at the air/water interface at low surface pressure. Additional details of the molecular packing were gleaned from single-crystal X-ray structure analysis of the hexapyridinium model compound 2b, which possesses methyl instead of eicosyl residues.     

Determination of trace elements in zeolites by laser ablation ICP-MS

Laser ablation inductively coupled plasma mass spectrometry using a quadrupole-based mass spectrometer (LA-ICP-QMS) was applied for the analysis of powdered zeolites (microporous aluminosilicates) used for clean-up procedures. For the quantitative determination of trace element concentrations three geological reference materials, granite NIM-G, lujavrite NIM-L and syenite NIM-S, from the National Institute for Metallurgy (South Africa) with a matrix composition corresponding to the zeolites were employed. Both the zeolites and reference materials were fused with a lithium borate mixture to increase the homogeneity and to eliminate mineralogical effects. In order to compare two different approaches for the quantification of analytical results in LA-ICP-MS relative sensitivity coefficients (RSCs) of chemical elements and calibration curves were measured using the geostandards. The experimentally obtained RSCs are in the range of 0.2-6 for all elements of interest. Calibration curves for trace elements were measured without and with Li or Ti as internal standard element. With a few exceptions the regression coefficients of the calibration curves are better than 0.993 with internal standardization. NIM-G granite reference material was employed to evaluate the accuracy of the technique. Therefore, the measured concentrations were corrected with RSCs which were determined using lujavrite reference material NIM-L. This quantification method provided analytical results with deviations of 1-11% from the recommended and proposed values in granite reference material NIM-G, except for Co, Cs, La and Tb. The relative standard deviation (RSD) of the determination of the trace element concentration (n = 5) is about 1% to 6% using Ti as internal standard element. Detection limits of LA-ICP-QMS in the lower microg/g range (from 0.03 microg/g for Lu, Ta and Th to 7.3 microg/g for Cu, with the exception of La) have been achieved for all elements of interest. Under the laser ablation conditions employed (lambda: 266 nm, repetition frequency: 10 Hz, pulse energy: 10 mJ, laser power density: 6 x 10(9) W/cm2) fractionation effects of the determined elements relative to the internal standard element Ti were not observed.     

Crystal structure of 1-hydroxy-1,2,3-benzotriazolium diphenyl phosphate reveals strong NHO and OHO hydrogen bonds

The structure of 1-hydroxy-1,2,3-benzotriazolium diphenyl phosphate (HOBt/DPP) has been investigated by X-ray analysis. The compound crystallizes in the monoclinic space group P2₁/n with Z = 4 and the following lattice parameters: a = 11.711(2), b = 12.727(2) and c = 12.794(3) Å, β = 105.12(2)°, V = 1840.9(6) ų. The structure was solved by direct methods and refined on F² to R values of wR2 = 0.084 and R1 = 0.034 for 1985 observed reflections. HOBt/DPP has an ionic structure with very short OHO and NHO hydrogen bonds linking the different ions. Owing to these hydrogen bonds, infinite screw-shaped chains which are twisted parallel to the y-axis are formed.     

Optical properties of perturbed NO 2 − ions in KNO2 doped NaNO2 single crystals

Summary On the basis of high-resolution and time-resolved fluorescence spectra, a model is proposed for the interpretation of the fluorescence lines originating from various perturbed NO ₂ ^– centers situated in the neighbourhood of the K⁺ ion of the NaNO₂:KNO₂ crystal. Since their excited state energies are lower than that of the host, these perturbed NO ₂ ^– ions act as traps for the host singlet exciton. On the assumption that the perturbation giving rise to those traps results from an interaction of the impurity ion K⁺ with its nearest neighbours, the observed position of the energy levels of the various traps can be reconciled with crystal field calculations.     

A new strategy of solution calibration in laser ablation inductively coupled plasma mass spectrometry for multielement trace analysis of geological samples

Because multielement trace analysis by laser ablation inductively coupled plasma mass spectrometry (LA-ICP-MS) is often limited by the lack of suitable reference materials with a similar matrix composition, a novel quantification strategy using solution calibration was developed. For mass spectrometric multielement determination in geological samples a quadrupole-based LA-ICP-MS is coupled with an ultrasonic nebulizer (USN). In order to arrange matrix matching the standard solutions are nebulized with a USN during solution calibration and simultaneously a blank target (e.g. lithium borate) is ablated with a focused laser beam. The homogeneous geological samples were measured using the same experimental arrangement where a 2% nitric acid is simultaneously nebulized with the USN. Homogeneous targets were prepared from inhomogeneous geological samples by powdering, homogenizing and fusing with a lithium borate mixture in a muffle furnace at 1050 degrees C. Furthermore, a homogeneous geological glass was also investigated. The quantification of analytical results was performed by external calibration using calibration curves measured on standard solutions. In order to compare two different approaches for the quantification of analytical results in LA-ICP-MS, measured concentrations in homogeneous geological targets were also corrected with relative sensitivity coefficients (RSCs) determined using one standard solution only. The analytical results of LA-ICP-MS on various geological samples are in good agreement with the reference values and the results of other trace analytical methods. The relative standard deviation (RSD) for trace element determination (N = 6) is between 2 and 10%.     

Infrared spectra of bis(aniline) and bis (p-toluidine) metal(II) isothiocyanate complexes

The infrared spectra of eight complexes of general formula [ML₂(NCS)₂] (M = Co, Ni, Cu, Zn; L = aniline or p-toluidine) have been determined over the range 4000–4150 cm^?1. Colour, magnetic moments and IR spectra are consistent with polymeric octahedral coordination in the Co(II) and Ni(II) complexes and polymeric tetragonal coordination in the Cu(II) complexes, while the Zn(II) complexes are assigned polymeric octahedral (L = aniline) and tetrahedral (L = p-toluidine) structure on the basis of their IR spectra. Independent ¹⁵N-labelling of the nitrogen atoms of the amino and isothiocyanate groups yields assignments for the internal vibrations of both groups and enables the metal-amine and metal—isothiocyanate stretching vibrations (vM-NH₂ and vM-NCS) to be distinguished. Both vM-NH₂ and vM-NCS are metal ion dependent in the Irving-Williams sequence (Co < Ni < Cu > Zn) expected from their proposed structures while the vN-H and vN-CS vibrations are inversely related to the masses of the coordinated metal ions.     

Synthesis and Chemical Constitution of Diphenoxyphosphoryl Derivatives and Phosphonium Salts as Coupling Reagents for Peptide Segment Condensation

The reactions of diphenoxyphosphoryl chloride ((PhO) 2 P(O)Cl) and different chlorophosphonium salts ([R 3 PCl]X, R = (CH 3 ) 2 N, pyrrolidine, X = PF 6 m , BF 4 m ), respectively, with 7-aza-1-hydroxybenzotriazole (HOAt), 1-hydroxybenzotriazole (HOBt), hydroximinomalonitrile (HOxDCO), and ethyl hydroximinocyanoacetate (HOxO) are described. The structures of the new compounds, which are useful coupling reagents for epimerization-free peptide segment condensation, are discussed on the basis of their 1 H, 13 C, 31 P NMR, and IR spectra. The reactions of (PhO) 2 P(O)Cl lead to mixtures of O - and N -phosphorylated isomers of varying ratios. Contrary, reactions of chlorophosphonium salts yield exclusively one isomer.