Determination of manganese in brain samples by slurry sampling graphite furnace atomic absorption spectrometry

A simple procedure for the determination of manganese in different sections of human brain samples by graphite furnace atomic absorption spectrometry has been developed. Brain sections included cerebellum, hypothalamus, frontal cortex, vermix and encephalic trunk. Two sample preparation procedures were evaluated, namely, slurry sampling and microwave-assisted acid digestion. Brain slurries (2% w/v) could be prepared in distilled, de-ionized water, with good stability for up to 30 min. Brain samples were also digested in a domestic microwave oven using 5 ml of concentrated HNO₃. A mixed palladium+magnesium nitrate chemical modifier was used for thermal stabilization of the analyte in the electrothermal atomizer up to pyrolysis temperatures of 1300 °C, irrespective of the matrix. Quantitation of manganese was conducted in both cases by means of aqueous standards calibration. The detection limits were 0.3 and 0.4 ng ml⁻¹ for the slurry and the digested samples, respectively. The accuracy of the procedure was checked by comparing the results obtained in the analysis of slurries and digested brain samples, and by analysis of the NIST Bovine Liver standard reference material (SRM 1577a). The ease of slurry preparation, together with the conventional set of analytical and instrumental conditions selected for the determination of manganese make such methodology suitable for routine clinical applications.     

Asymmetric synthesis of 4,4-disubstituted-2-imidazoli-dinones: potent NK1 antagonists

[structure: see text] A highly efficient and practical synthesis of 4,4-Disubstituted-2-Imidazolidinones utilizing a "self-reproduction of the center of chirality" strategy is described.     

Glycidol syntheses and valorizations: Boosting the glycerol biorefinery

1. Download : Download high-res image (130KB)
2. Download : Download full-size image

     

Characterisation of fresh and aged terpenic resins by micro-FTIR and GC-MS analyses of varnishes in XVI-XVII centuries paintings

Resinous materials, generally added to drying oils, were often employed as final protective films in paintings, both in tempera and oil techniques. Most of the resins used in fine arts come from exudates of plants. Natural resins are mainly composed by terpenoids. Among these resins, dammar, rosin, mastic, elemi gum, Venice turpentine were frequently employed in easel paintings. The aim of this work is the identification of natural resins in samples collected from works of art. In this paper we propose to use micro-FTIR spectrometry as a preliminary and non destructive technique to detect the presence of resinous materials in microsamples collected from paintings, followed by GC-MS analyses to obtain a precise identification of the resin. To reach this aim commercial resins, employed as standard, were analysed previously by micro-FTIR spectrometry and then analysed by GC-MS chromatography, searching characteristic chemical compounds used as "markers" of resins. The results obtained on standards allowed us to successfully analyse samples collected from two works of art: the "Portrait of a Young Gentleman", by Lorenzo Lotto (XVI century), and the "Madonna with the Infant Jesus and Saints": by Carlo Maratta (XVII secolo).     

Conformational studies by dynamic NMR. 94.1 cogwheel pathway for the stereomutations of durene derivatives containing the mesityl ring

The low-temperature NMR spectra of 1,4-bis(mesitoyl)durene, 1, and of 1,4-bis(mesitylethenyl)durene, 2, reveal the presence of syn and anti rotamers at the equilibrium, their relative proportions depending on the dielectric constant of the solvent. In solution the more stable rotamer of 1 is the anti whereas, in the case of 2, the more stable is the syn. Depending on the crystallization solvent employed the more (anti) and the less stable (syn) rotamers were both observed (X-ray diffraction) in the solid state of 1. On the other hand, only the less stable rotamer (anti) was found to be present in the solid state of 2. As shown by MM calculations, the syn-to-anti interconversion occurs via a correlated process (cogwheel pathway) involving the mesityl-C and durene-C bond rotations: the dynamic NMR technique yields an experimental barrier of 8.2 kcal mol(-)(1) for 1 and 13.1 kcal mol(-)(1) for 2. In the case of derivative 2 a second barrier, due to a second type of correlated rotation process (torsion), was also determined (8.6 kcal mol(-)(1)). As a consequence of the restriction of this second torsional motion the anti rotamer of 2 displays two distinguishable NMR spectra at -133 degrees C, corresponding to a pair of conformers with different symmetry (anti C(i)() and anti C(2)).     

Quantum mechanical calculations of conformationally relevant 1H and 13C NMR chemical shifts of calixarene systems

[graphs: see text] QM GIAO calculations of 13C and 1H chemical shift values of the ArCH2Ar group have been performed, using the hybrid DFT functional MPW1PW91 and the 6-31G(d,p) basis set, on some representative calixarenes and on a series of simplified calixarene models allowing derivation of chemical shift surfaces versus phi and chi dihedral angles. A good reproduction of experimental data was obtained. The applicability of chemical shift surfaces in the study of calixarene conformational features is illustrated.     

Dynamic-mechanical properties and melting points of some aliphatic and partially aromatic polyamides

Some aliphatic and partially aromatic polyamides have been prepared from hexamethylene diamine and the following dicarboxylic acids: deca-, octa-, hexa-methylenedicarboxylic, p-carboxymethylphenoxyacetic, p-carboxyethylphenoxyacetic, p-phenylenedipropionic, p-phenylenediacetic, p-carboxymethoxyphenoxyacetic, β(p-carboxymethyl)phenylpropionic.The dynamic-mechanical properties at 110 Hz have been measured between ?140° and about 200. Three relaxation processes α β and γ have been found: only the main transition α appreciably depends on chemical structure.The influences of the length of repeating unit and of in-chain substitution on melting points, crystallinity and the dynamic-mechanical α transition have been investigated. The results have been discussed in terms of chain flexibility, chain packing and intermolecular forces.     

Mass fragmentation pattern of N- and O-substituted 2-morpholinols

The mass spectra of a series of N- and O-substituted 2-morpholinols were considered and the complex fragmentation pattern explained on the basis of evidences reported in the literature and of experimental data (high resolution, metastable ions). The primary fragmentations are given by inductive cleavage due to the heteroatoms, while ring contractions, through retro Diels-Alder reactions, form most of the secondary pattern with different ions related to N- and O-substituents. Moreover, hemiacetals in the tautomeric hydroxyaldehyde form undergo an α-cleavage.     

On the electronic states of macrocycles of the extended porphyrin family and their coordination compounds

The electronic absorption spectra of Ni, Zn and Mg hemiporphyrazine derivatives are presented and discussed together with theoretical results obtained by INDO/S computations. The absorption spectra of all the metal derivatives show marked red shifts of the lowest energy absorption bands with respect to those of the metal free hemiporphyrazine. The possible explanation that in metal derivatives low lying excited states with a fully conjugated π electron system are present is supported by theoretical computations.     

Solvent Effect and Reactivity Trend in the Aerobic Oxidation of 1,3‐Propanediols over Gold Supported on Titania: NMR Diffusion and Relaxation Studies

In recent work, it was reported that changes in solvent composition, precisely the addition of water, significantly inhibits the catalytic activity of Au/TiO₂ catalyst in the aerobic oxidation of 1,4‐butanediol in methanol due to changes in diffusion and adsorption properties of the reactant. In order to understand whether the inhibition mechanism of water on diol oxidation in methanol is generally valid, the solvent effect on the aerobic catalytic oxidation of 1,3‐propanediol and its two methyl‐substituted homologues, 2‐methyl‐1,3‐propanediol and 2,2‐dimethyl‐1,3‐propanediol, over a Au/TiO₂ catalyst has been studied here using conventional catalytic reaction monitoring in combination with pulsed‐field gradient nuclear magnetic resonance (PFG‐NMR) diffusion and NMR relaxation time measurements. Diol conversion is significantly lower when water is present in the initial diol/methanol mixture. A reactivity trend within the group of diols was also observed. Combined NMR diffusion and relaxation time measurements suggest that molecular diffusion and, in particular, the relative strength of diol adsorption, are important factors in determining the conversion. These results highlight NMR diffusion and relaxation techniques as novel, non‐invasive characterisation tools for catalytic materials, which complement conventional reaction data.