Studies on Mononuclear Chelates Derived from Substituted Schiff Base Ligands: Synthesis and Characterization of a New 5-Methoxysalicyliden-<Emphasis Type="Italic">p</Emphasis>-Aminoacetophenoneoxime and Its Complexes with Co(II), Ni(II), Cu(II), and Zn(II)

New complexes of Co(II), Ni(II), Cu(II), and Zn(II) with new Schiff bases derived by the condensation of p-aminoacetophenoneoxime with 5-methoxysalicylaldehyde are synthesized. The compounds are characterized by elemental analyses, magnetic susceptibility measurements, IR, ¹H and ¹³C NMR spectra, electronic spectral data, and molar conductivity. The thermal stabilities of the compounds are also reported. The Schiff base acts as bidentate O,N-donor atoms, and their metal complexes are supposed to possess a tetrahedral geometry with respect to the central metal ion. The general formula of the 5-methoxysalicyliden-p-aminoacetophenoneoxime Co(II), Ni(II), Cu(II), and Zn(II) complexes is Co(L)₂, Ni(L)₂, Cu(L)₂, and Zn(L)₂.     

Interdiffusion of polymer chains during latex coating

The fluorescence method was used to study the interdiffusion of polymer chains during annealing of latex above its glass transition temperature (T_g). The latex film was prepared from mixture of naphthalene (N) (donor) and pyrene (P) (acceptor)-labeled poly(methyl methacrylate) (PMMA) latex particles. Heptane was used as the coalescent agent. A steady-state fluorescence technique was employed to measure the amount of direct nonradiative energy transfer from N to P during the interdiffusion of polymer chains across the particle–particle junction. Various latex films with different latex contents were used to measure the percentage critical occupation for the reliable steady-state fluorescence measurements. Diffusions activation energies in these latex films were measured and found to be around 30 kcal/mol, which was attributed to the backbone motion of PMMA chains.     

Synthesis and Characterization of Mononuclear Cobalt(II), Nickel(II), Copper(II), Zinc(II), Cadmium(II) and Dinuclear Uranyl(VI) Complexes with N,N-bis(2-{[(2,2-dimethyl-1,3-dioxolan-4-yl)methyl]amino}butyl) N′,N′-dihydroxyethanediimidamide

In this study, the new vic-dioxime ligand (LH₂) and its complexes with Co^II, Ni^II, Cu^II, Zn^II, Cd^II and UO₂^VI are described. The structures of these complexes were characterized by elemental analyses, i.r., ¹H- and ¹³C-n.m.r. spectra, u.v.–vis. spectroscopy, magnetic susceptibility measurements, conductivity measurements and thermogravimetric analyses (t.g.a.).     

Controlled protein adsorption on a silica microparticle

In the present study, controlled protein adsorption on a rigid silica microparticle is investigated numerically using classical Langmuir and two-state models under electrokinetic flow conditions. The instantaneous particle locations are simulated along a straight microchannel using an arbitrary Lagrangian−Eulerian framework in the finite element method for the electrophoretic motion of the charged particle. Within the scope of the parametric study, the strength of the external electric field (E), particle diameter (D_p), the zeta potential of the particle (ζ_p), and the location of the microparticle away from the channel wall (H) are systematically varied. The results are also compared to the data of pressure-driven flow having a parabolic flow profile at the inlet whose maximum magnitude is set to the particle's electrophoretic velocity magnitude. The validation studies reveal that the code developed for the particle motion in the present simulations agrees well with the experimental results. It is observed that protein adsorption can be controlled using electrokinetic phenomena. The plug-like flow profile in electrokinetics is beneficial for a microparticle at every spatial location in the microchannel, whereas it is not valid for the pressure-driven flow. The electric field strength and the zeta potential of the particle accelerate the protein adsorption. The wall shear stress and shear rate are good indicators to predict the adsorption process for electrokinetic flow.     

Healing and photon diffusion during sintering of high-T latex particles

A steady-state fluorescence technique was used to examine the annealing of films formed from high-T latex particles above the glass transition temperature. The films were prepared by sintering pyrene-labeled poly(methyl methacrylate) latex particles. During the annealing processes, the transparency of the film changed considerably. Direct fluorescence emission from excited pyrene was monitored as a function of annealing temperature to detect these changes. Scanning electron microscopy in conjunction with Monte Carlo simulations of photon diffusion in latex film were used to interpret the fluorescence results. Healing temperature and time were measured at the point where the fluorescence emission intensity becomes maximum. This was associated with the longest optical path of a photon in latex film during healing of particle(SINGLEBOND)particle boundaries. Healing activation energy was measured and found to be 10 kcal/mol. © 1996 John Wiley & Sons, Inc.     

Variation of photon density distribution with system component within Intralipid emulsion

In order to recover distributions of optical parameters of underlining tissues utilizing backreflection optic tomography or diffuse reflectance spectroscopy for diagnostic proposes, trajectories of photons should be correctly estimated within tissue. Therefore, we have simulated the soft tissues with 1% Intralipid emulsion and have determined photon density distribution as a function of depth inside the Intralipid emulsions using laser light of wavelength 808 nm and two different detectors for different source-to-detector (S-D) separations. In this study we have shown difference in path distribution of the detected photons with two different detectors with different sensitivity for the same S-D separations in the Intralipid emulsions. This study has also shown that, the maximum penetration depth (MPD) of the detected photons is not an increasing function of the S-D separations. After reaching a maximum depth, the penetration depth decreases as S-D separation increases.     

Synthesis of New Glyoxime Derivatives,Characterization and Investigation of Their Complexes with Co(II), Ni(II), and Cu(II) Metals and Thermal Studies

In this study, two new vic-dioxime ligands and their complexes with Co²⁺, Ni²⁺, and Cu²⁺ ions were synthesized. Secondary amines (morpholine and piperidine) reacted with anti-chloroglyoxime to give morpholineglyoxime (H₂L¹) and piperidineglyoxime (H₂L²) ligands. All the complexes have a metal to ligand ratio of 1 : 2. The structure of the ligands and their complexes was proposed from elemental analyses, IR, UV-VIS, ¹H and ¹³C NMR spectra, conductivity, magnetic susceptibility measurements, and thermogravimetric analyses.__________From Koordinatsionnaya Khimiya, Vol. 31, No. 7, 2005, pp. 535–539.Original English Text Copyright © 2005 by Ozkan, Canpolat, Kaya.The text was submitted by the authors in English.     

Spectroscopic Characterization of <Emphasis Type="Italic">N,N-bis</Emphasis>(2-{[(2,2-Dimethyl-1,3-Dioxolan-4-yl)Methyl]Amino}Ethyl) N′,N′-Dihydroxyethanediimidamide and Its Complexes

A new dioxime ligand, N,N-bis(2-{[(2,2-dimethyl-1,3-dioxolan-4-yl)methyl]amino} ethyl)N′,N′-dihydroxyethanediimidamide (H₂L), and its mononuclear complexes with Co²⁺, Ni²⁺, Cu²⁺, Zn²⁺ and Cd²⁺ are synthesized. H₂L forms transition metal complexes [Co(LH)₂(H₂O)₂] and [M(LH)₂] (M = Ni²⁺, Cu²⁺) with a metal : ligand ratio of 1 : 2. Complexes [M(H₂L)(Cl)₂] (Zn²⁺, Cd²⁺) have a metal : ligand ratio of 1 : 1. The mononuclear Co²⁺, Ni²⁺, and Cu²⁺ complexes indicate that the metal ions coordinate ligand through its two N atoms, as the most of dioximes. In the Co²⁺ complex, two water molecules and in the Zn²⁺ and Cd²⁺ complexes two chloride ions are also coordinated to the metal ion. The structures of these compounds are identified by elemental analyses, IR, ¹H and ¹³C NMR, electronic spectra, magnetic susceptibility measurements, conductivity, and thermogravimetric analysis.__________From Koordinatsionnaya Khimiya, Vol. 31, No. 7, 2005, pp. 540–544.Original English Text Copyright © 2005 by Canpolat, Kaya.The text was submitted by the authors in English.     

Determination of Trace Amounts of Copper in Tap Water Samples with a Calix[4]arene Modified Carbon Paste Electrode by Differential Pulse Anodic Stripping Voltammetry

A calix[4]arene modified carbon paste electrode was used for trace determination of copper. The study of the preconcentration of copper as well as the other heavy metal ions at the modified electrode, with subsequent measurement by differential pulse anodic stripping voltammetry (DPASV), indicates the efficient open‐circuit accumulation of the analytes onto the electrode. Many parameters such as the composition of the paste, pH, preconcentration time and stirring rate influence the response of the measurement. The procedure was optimized for copper determination. For a 10‐minute preconcentration time at pH 6.5–7.5, the detection limit (LOD) was 1.1 μg L^?1. The optimized method was successfully applied to the determination of copper in tap water sample by means of standard addition procedure. The copper content of the sample was comparable with the result obtained with AAS method.     

Studies on Mononuclear Chelates Derived from Substituted Schiff Bases Ligands (Part 3). Synthesis and Characterization of a New 5-Nitrosalicylidene-<Emphasis Type="Italic">p</Emphasis>-aminoacetophenoneoxime and Its Complexes with Co(II), Ni(II), Cu(II), and Zn(II)

A new ligand, 5-nitrosalicylidene-p-aminoacetophenoneoxime (HL), was synthesized from p-aminoacetophenoneoxime and 5-nitrosalicylaldehyde under reflux in absolute EtOH at 60°C for 3 h. Mononuclear complexes with a metal : ligand ratio of 1 : 2 were prepared with Co^II, Ni^II,Cu^II, and Zn^II salts. Their structures were determined on the basis of elemental analyses, IR, ¹H and ¹³C NMR, electronic spectra, magnetic susceptibility measurements, molar conductivity, and thermogravimetric analyses. According to the results, two ligands were suggested to be coordinated to each metal atom by phenolic oxygen and imino nitrogen to form high-spin tetrahedral complexes with cobalt(II), nickel(II), and copper(II) while forming a diamagnetic complex with zinc(II).__________From Koordinatsionnaya Khimiya, Vol. 31, No. 6, 2005, pp. 441–445.Original English Text Copyright © 2005 by Canpolat, Kaya.This article was submitted by the authors in English.