Description of the turbidity measurements near the phase transition temperature of poly(N-isopropyl acrylamide) copolymers: the effect of pH, concentration, hydrophilic and hydrophobic content on the turbidity

Absorbance values between 300 and 800 nm of aqueous solutions of poly(N-isopropyl acrylamide-co-itaconic acid-9.80), poly(N-isopropyl acrylamide-co-itaconic acid-52.05) and poly(N-isopropyl acrylamide)s containing Tegomer H-Si 2111 end groups and/or blocks were measured using a Shimadzu 160-A UV-visible spectrometer. Turbidities obtained from these absorbance values were used to interpret the macromolecular phase transition from a hydrophilic to a hydrophobic structure of the polymers. The effects of comonomer type and content, concentration of the solutions, pH and temperature on the coil-globule transition were discussed in terms of turbidity form factor, β related to size and shapes of particles and calculated by using the simplified form of Debye equation.The results presented in this work show that the presence of Tegomer H-Si 2111 (Si containing end groups and/or blocks) or high amount of itaconic acid (IA) in the chains prevent a collapse transition from hydrated extended coils to hydrophobic globules, which aggregate and form a separate phase (β<2). Furthermore, it was observed that in the case of concentrated solutions intermolecular hydrophobic interactions between isopropyl groups overcame the repulsive forces resulting from the ionized carboxylic acid groups of IA or surface active nature of Si containing hydrophobic groups (β>2). This stage of the transition corresponds to macroscopic phase separation after an intramolecular process.     

Binary and Ternary Copper(II) Complexes with NIPAAm/IA Copolymers and Aminoacids: Interpretation of UV‐Visible Spectra and Cyclic Voltammograms

The complex formations of homopolymers and copolymers of poly(N‐isopropyl acrylamide) (PNIPAAm), polyacrylamide (PAAm) and poly(itaconic acid) (PIA) with Cu(II) ions in aqueous solutions were studied by using UV‐visible spectra in the region of 200–1100 nm and cyclic voltammograms between ?0.800 V and 0.600 V. According to the optical and electrochemical spectra of the polymer‐ and copolymer‐Cu(II) complexes and their ternary complexes with alanine, i.e., absorptions and the shifts in the wavelength of the maximum absorptions, currents and potentials of the peaks in the pH range of 3–12, the intensities of anodic and cathodic peak currents of polymers containing IA groups decrease with increasing pH and they show maximum absorptions at lower wavelengths than do the homopolymers used in this work. The peak point of the visible band shifts from 800 to 650 nm, with increasing pH, while the intensity of the third anodic peak observed after pH=4 increases in the case of both Ala‐Cu(II) and its ternary solution with P(NIPAAm‐co‐IA, 9.8 mol%). Both the pH‐dependent shifts of maximum absorptions and the appearence of the third anodic peaks as the pH raised were interpreted as a presence of tetracoordinated Cu(II) complexes in the solution and on the electrode surface, involving combined carboxyl, amide and amine interaction.     

Oscillation criteria and asymptotic properties of solutions of third‐order nonlinear neutral differential equations

The main goal of this article is to study the asymptotic properties and oscillation of the third‐order neutral differential equations with discrete and distributed delay. We give several theorems and related examples to illustrate the applicability of these theorems. Copyright © 2014 John Wiley & Sons, Ltd.     

Positive solutions of first-order neutral differential equations

This work contains positive solution of first-order neutral functional differential equations with distributed deviating arguments. Some sufficient conditions for the existence of positive solutions are obtained. We use the Banach contraction principle to prove our results.     

Hazardous metal geochemistry of sedimentary phosphate rock used for fertilizer (Maz?dag, SE Anatolia, Turkey)

Composition of phosphate rocks mostly depend on their type and origin. Sedimentary rocks contain high concentration of heavy metals. Phosphate rocks are mainly used for the manufacturing of phosphate fertilizers. The contents of heavy metals Cd, Co, Cu, Fe, Mn, Ni, Pb and Zn, as well as rare earth elements Ce, La, and Th were determined in sedimentary phosphate rock used for production of fertilizer in Turkey. The Kasrik-Semikan, Mazidag (Mardin, SE Anatolia, Turkey) high-grade phosphate rock used in this study is situated near the border with Syria and was deposited during the Turonian and Senonian (Cretaceous) ages. Total phosphorus (P) concentration in the rock is 18.5% on the average. Microwave acid digestion (MW-AD) followed by ?nductively Coupled Plasma-Optical Emission Spectrophotometry (ICP-OES) was carried out for the determination of all the elements of interest in phosphate rock. The results revealed that hazardous metal content of the phosphate rock was lower in Mazidag phosphate than that in samples imported from other countries and were within the safety limits.     

Effects of TEMED and EDTA on the structural and mechanical properties of NIPAAm/Na+MMT composite hydrogels

N‐isopropyl acrylamide (NIPAAm) hydrogels are known as thermosensitive crosslinked polymer networks. In this work, the network parameters of their composites, i.e., NIPAAm/sodium montmorillonite (NIPAAm/Na⁺MMT) hydrogels synthesized by free radical solution polymerization in the presence of two different types of accelerator (tetramethyl ethylenediamine (TEMED) and ethylenediamine tetraacetic acid (EDTA)) and initiator (potassium persulphate (K₂S₂O₈) and cerium ammonium nitrate ((NH₄)₂Ce(NO₃)₆), Ce(IV)) using five different clay content (in the range of 1.0–5.0 wt % of total monomer concentration) at 25 °C were presented and discussed. FTIR spectra, XRD patterns, SEM photographs, and network parameters of the samples indicated that the presence of COOH groups on EDTA molecules was resulted in the formation of exfoliated structures and the activity of EDTA/KPS redox pair was higher than those of TEMED/KPS and EDTA/Ce (IV) pairs. The compression moduli (G) of the hydrogels initiated with EDTA/Ce(IV) redox pair showed smooth and continual changings with increase in Na⁺MMT content (for swelling equilibrium at 25 °C) on the contrary of EDTA/KPS and TEMED/KPS pairs. It might be related to low initiator efficiency of cerium ammonium nitrate than KPS molecules, having higher effective crosslinking density with increasing clay content. On the other hand, the G moduli of NIPAAm/Na⁺MMT hydrogels (above their phase transition temperature) initiated with TEMED/KPS redox pair were higher than the others because of the more hydrophobic nature of TEMED molecules. © 2010 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 48: 1256–1264, 2010     

Stabilization of horseradish peroxidase by covalent conjugation with dextran aldehyde against temperature and pH changes

Stabilization of Horseradish Peroxidase (HRP; EC 1.11.1.7) against temperature and pH via the formation of the conjugates obtained by multipoint covalent bonding of dextran aldehyde (DA) to the enzyme were studied. Hence, three different molar weighted dextrans (17.5 kD, 75 kD, 188 kD) were covalently bonded to purified enzyme with different molar ratios (n_HRP/n_DA 20/1, 10/1, 1/1, 1/5, 1/10, 1/15, 1/20). The thermal stabilities of the obtained conjugates were evaluated with the activities determined at different temperatures (25, 30, 35, 40, 50, 60, 70, 80°C) applying 60 minutes incubation time. Conjugates formed were characterized by gel-permeation chromatography (GPC) and fluorescence techniques. The conjugate synthesized using dextran 75 kDa with n_HRP/n_DA 1/10 molar ratio showed better thermal stability than other conjugates and purified enzyme at pH 7. This conjugate also has wider activity pH range than purified enzyme. In addition, mentioned conjugate at pH 7 had very long storage lifetime compared to purified enzyme at +4°C and room temperature; which is considered a favorable feature for usage in practice.      

The existence of nonoscillatory solutions of higher order nonlinear neutral equations

In this work, we consider the existence of nonoscillatory solutions of variable coefficient higher order nonlinear neutral differential equations. Our results include as special cases some well-known results for linear and nonlinear equations of first, second and higher order. We use the Banach contraction principle to obtain new sufficient conditions for the existence of nonoscillatory solutions.     

Single-step fabrication of patterned gold film array by an engineered multi-functional peptide

This study constitutes a demonstration of the biological route to controlled nano-fabrication via modular multi-functional inorganic-binding peptides. Specifically, we use gold- and silica-binding peptide sequences, fused into a single molecule via a structural peptide spacer, to assemble pre-synthesized gold nanoparticles on silica surface, as well as to synthesize nanometallic particles in situ on the peptide-patterned regions. The resulting film-like gold nanoparticle arrays with controlled spatial organization are characterized by various microscopy and spectroscopy techniques. The described bio-enabled, single-step synthetic process offers many advantages over conventional approaches for surface modifications, self-assembly and device fabrication due to the peptides' modularity, inherent biocompatibility, material specificity and catalytic activity in aqueous environments. Our results showcase the potential of artificially-derived peptides to play a key role in simplifying the assembly and synthesis of multi-material nano-systems in environmentally benign processes.