Selection of thermotolerant yeasts for simultaneous saccharification and fermentation (SSF) of cellulose to ethanol

A total of 27 yeast strains belonging to the groupsCandida, Saccharomyces, andKluyveromyces were screened for their ability to grow and ferment glucose at temperatures ranging 32-45°C. K. marxianus andK. fragilis were found to be the best ethanol producing organisms at the higher temperature tested and, so, were selected for subsequent simultaneous saccharification and fermentation (SSF) studies.     

Ethanol production from steam-explosion pretreated wheat straw

Bioconversion of cereal straw to bioethanol is becoming an attractive alternative to conventional fuel ethanol production from grains. In this work, the best operational conditions for steam-explosion pretreatment of wheat straw for ethanol production by a simultaneous saccharification and fermentation process were studied, using diluted acid [H₂SO₄ 0.9% (w/w)] and water as preimpregnation agents. Acid-or water-impregnated biomass was steam-exploded at different temperatures (160–200°C) and residence times (5, 10, and 20 min). Composition of solid and filtrate obtained after pretreatment, enzymatic digestibility and ethanol production of pretreated wheat straw at different experimental conditions was analyzed. The best pretreatment conditions to obtain high conversion yield to ethanol (approx 80% of theoretical) of cellulose-rich residue after steam-explosion were 190°C and 10 min or 200°C and 5 min, in acid-impregnated straw. However, 180°C for 10 min in acid-impregnated biomass provided the highest ethanol yield referred to raw material (140 L/t wheat straw), and sugars recovery yield in the filtrate (300 g/kg wheat straw).     

Topological excitations vs intergranular phase — coherence in a HTSC Y0.5Sm0.5Ba2Cu3O7 ceramics

This paper reports a detailed study of the electrical transport properties of good quality superconducting Y_0.5Sm_0.5Ba₂Cu₃O₇ ceramic samples. Analyses of the dependence of resistance on temperature, the relations current-voltage and the magnetoresistance allows to identify:a) the mean field critical temperature (T _CO =93.73±0.01 K);b) a power law behaviorVI atT _CO . The exponent jumps abruptly from 1 to 3, at a certain temperatureT _C =93.276±0.005 K;c) an exponential inverse root-square temperature dependence of the resistivity in theT _{C–T CO} temperature range. These features, typically observed when topological excitations sets in two dimensional systems, can also be interpreted as a signature of a percolation process and a transition towards intergranular phase coherence. We analyze and discuss the relevance of both models to account for the experimental data.     

Analysis of conformational equilibria in aplidine using selective excitation 2D NMR spectroscopy and molecular mechanics/dynamics calculations

Aplidine (dehydrodidemnin B), a natural product with potent antitumor activity currently in multicenter phase II clinical trials, exists in DMSO as a mixture of four slowly interconverting conformations in a ratio of 47:33:13:7. NMR spectroscopy shows that these arise as a consequence of cis/trans isomerization about the NMe-Leu(7)-Pro(8) and Pro(8)-Pyr amide bonds of the molecule's side chain. Two major conformations account for 47% and 33% of the total population, a ratio of 60:40 between the two. They correspond to the cis- and trans-isomers, respectively, about the Pro(8)-Pyr amide bond. Two minor conformers arise as a consequence of similar isomerism about the Pro(8)-Pyr amide bond, but in structures in which the NMe-Leu(7)-Pro(8) amide bond is cis rather than trans. These account for approximately 13% and 7% of the total population, corresponding to a ratio of 65:35 cis/trans, respectively. Molecular dynamics simulations show that the three-dimensional structures of all four conformational isomers are similar in the macrocycle and that all are essentially unchanged with respect to the macrocycle of didemnin B. Significant differences in the conformation of the molecule's side chain are, however, observed between major and minor pairs. Analysis of hydrogen-bonding patterns shows that each major conformer exhibits a beta-turn like structure and is stabilized by hydrogen bonding between a different carbonyl group of the pyruvyl unit of the molecule's side chain and the NH of the Thr(6) residue. The minor isomers have a cis-amide bond between the NMe-Leu(7) and Pro(8) residues that obliges the side chain to adopt an extended disposition where hydrogen bonding to the macrocycle is absent. These results suggest that the ability of the molecule's side chain to adopt a beta-turn-like conformation may not be a prerequisite for biological activity in the didemnins and that conformations having an extended side-chain may play a role in the biological activity of aplidine.     

Solid-phase total synthesis of trunkamide A(1).

Marine organisms are a rich source of novel, biologically active compounds. Herein, the solid-phase total synthesis of trunkamide A, currently in preclinical trials, is presented. Trunkamide A contains a thiazoline heterocycle and two residues of Ser and Thr with the hydroxy function modified as reverse prenyl (rPr). Cornerstones of the synthesis are as follows: (i) solid-phase peptide chain elongation using a quasi-orthogonal protecting scheme with tert-butyl and fluorenyl based groups, on a chlorotrityl resin; (ii) concourse of HOAt-based coupling reagents; and (iii) cyclizations in solution. Furthermore, the following synthetic steps are discussed: (i) preparation of the reverse prenyl derivatives of Ser and Thr; (ii) introduction of precursor of thiazoline as a protected amino thionoacid derivative; and (iii) formation of the thiazoline ring with DAST. All these features make this strategy particularly suitable for the large-scale synthesis of trunkamide A and other peptides containing the same motifs.     

Coexistence of Two Thermally Induced Intramolecular Electron Transfer Processes in a Series of Metal Complexes [M(Cat‐N‐BQ)(Cat‐N‐SQ)]/[M(Cat‐N‐BQ)2] (M=Co,Fe, and Ni) bearing Non‐Innocent Catechol‐Based Ligands: A Combined Experimental and Theoretical Study

The different thermally induced intermolecular electron transfer (IET) processes that can take place in the series of complexes [M(Cat‐N‐BQ)(Cat‐N‐SQ)]/[M(Cat‐N‐BQ)₂], for which M=Co ( 2 ), Fe ( 3 ) and Ni( 4 ), and Cat‐N‐BQ and Cat‐N‐SQ denote the mononegative (Cat‐N‐BQ^?) or dinegative (Cat‐N‐SQ^2?) radical forms of the tridentate Schiff‐base ligand 3,5‐di‐tert‐butyl‐1,2‐quinone‐1‐(2‐hydroxy‐3,5‐di‐tert‐butylphenyl)imine, have been studied by variable‐temperature UV/Vis and NMR spectroscopies. Depending on the metal ion, rather different behaviors are observed. Complex 2 has been found to be one of the few examples so far reported to exhibit the coexistence of two thermally induced electron transfer processes, ligand‐to‐metal (IET^LM) and ligand‐to‐ligand (IET^LL). IET^LL was only found to take place in complex 3 , and no IET was observed for complex 4 . Such experimental studies have been combined with ab initio wavefunction‐based CASSCF/CASPT2 calculations. Such a strategy allows one to solicit selectively the speculated orbitals and to access the ground states and excited‐spin states, as well as charge‐transfer states giving additional information on the different IET processes.     

Preparation of magnetic polymer particles with nanoparticles of Fe(0)

Iron nanoparticles (Fe(0)), were encapsulated into polymethyl methacrylate (PMMA), by means of emulsion polymerization techniques in a semicontinuous process. The final average diameter of the composite particle was calculated until three times of average particle of iron particles and were stabilized with a non-ionic surfactant. They were then characterized by scanning electron microscopy and dynamic light scattering. Their magnetic properties were determined by parallel field vibrating-sample magnetometry method. The results indicated that the magnetic properties are a function of polymer concentration in the nanocomposite particle.     

Molecular Dynamics of PGA Bioabsorbable Polymer During Isothermal Cold Crystallization

An investigation was carried out on the molecular dynamics of poly(glycolide) (PGA) in its completely amorphous state and during isothermal cold crystallization. Experimental results were generated over a wide range of frequency and temperature by broad-band dielectric spectroscopy (DRS). The variation of the average relaxation time (defined as τ= ½πf_max where f_max is the frequency at maximum loss for the main α relaxation) has been studied during cold crystallization and the temperature dependence of this average relaxation time for completely amorphous and crystallized samples has been analyzed. This behaviour has been modelled by Havriliak-Negami and Vogel-Fulcher equations. The sensitiveness of the segmental dynamics to the degree of crystallinity has been analyzed, taking into account the relaxing segments and the amorphous layers between lamellae. Supporting evidence about the thermal behaviour of the polymers has been obtained with DSC. Complementarily, the evolution of the morphologies obtained during crystallization processes has been followed by optical microscopy.     

Towards microphase separation in epoxy systems containing PEO/PPO/PEO block copolymers by controlling cure conditions and molar ratios between blocks. Part 2. Structural characterization

The influence of addition of poly(ethylene oxide)-block-poly(propylene oxide)-block-poly(ethylene oxide) (PEO–PPO–PEO) copolymers on final morphologies of modified epoxy matrices has been investigated as a function of PEO:PPO molar ratio and cure conditions by comparison with the cured epoxy blends only containing poly(ethylene oxide) (PEO) or poly(propylene oxide) (PPO) homopolymers. Atomic force microscopy (AFM) has been used to characterize structural features of blends. Whilst diglycidyl ether of bisphenol-A (DGEBA)/4,4’-diaminodiphenylmethane (DDM)/PPO system macrophase separates, the interactions between PEO and cured epoxy are responsible for miscibility of DGEBA/DDM/PEO system. Depending on PEO:PPO molar ratio, micro- or macrophase separated morphologies have been obtained for block copolymer modified epoxy matrices. Moreover, the influence of both copolymer content and cure temperature on final morphologies has also been investigated by both experimental and theoretical analysis.     

Capability of diatomaceous earth to preconcentrate and store Pb and Cr: on-line determination by FI-FAAS

The diatomaceous earth (DE) has an important ability to retain metals such as Cd, Cr, Mn and Pb, which can be used for their stabilization in the environment and for analytical purposes. In this paper a fast on-line preconcentration method for the determination of Cr and Pb in waters by flow injection flame atomic absorption spectrometry is described. Preconcentration was based on the retention of Cr and Pb on a DE immobilized in silica gel at pH 3.0 and subsequent elution with 200 microL of 3 mol L(-1) HCl. The preconcentration factors were 100 and 150 for Pb and Cr respectively, for 16 mL water sample volume. The detection limits under these conditions were 3 ng mL(-1) and 1 ng mL(-1) for Pb and Cr, respectively. The stability of Cr and Pb retained on silica gel-DE columns was established. Silica gel-DE microcolumns with the retained analytes were stored for 2 months at two different temperatures: 4 degrees C and room temperature. At regular time intervals, both metals were eluted and quantified. The results showed the potential of the procedure for sampling and storing water samples for subsequent metal determination, avoiding the problems associated with maintaining species integrity in aqueous solution, and the possibility to of decontaminating polluted spaces.