Electrochemical characterization of LiCoO2 as rechargeable electrode in aqueous LiNO3 electrolyte

The development of lithium ion aqueous batteries is getting renewed interest due to their safety and low cost. We have demonstrated that the layer-structure LiCoO₂ phase, the most commonly used electrode material in organic systems, can be successful delithiated and lithiated again in a water-based electrolyte at currents up to 2.70 A/g. The capacity is about 100 mAh/g at 0.135 A/g and can be tuned by cycling the electrode in different potential ranges. In fact, increasing the high cut-off voltage leads to higher specific capacity (up to 135 mAh/g) but the Coulomb efficiency is reduced (from 99.9% to 98.5%). The very good electrode kinetic is probably due to the high conductivity of the electrolyte solution (0.17 Scm^− 1 at 25 °C) but this behavior is affected by the electrode load.     

Chemical Intercalation of Zerovalent Metals into 2D Layered Bi(2)Se(3) Nanoribbons

We have developed a chemical method to intercalate a variety of zerovalent metal atoms into two-dimensional (2D) layered Bi(2)Se(3) chalcogenide nanoribbons. We use a chemical reaction, such as a disproportionation redox reaction, to generate dilute zerovalent metal atoms in a refluxing solution, which intercalate into the layered Bi(2)Se(3) structure. The zerovalent nature of the intercalant allows superstoichiometric intercalation of metal atoms such as Ag, Au, Co, Cu, Fe, In, Ni, and Sn. We foresee the impact of this methodology in establishing novel fundamental physical behaviors and in possible energy applications.     

UTILIZATION OF TOOLS FOR SUCCESSFUL. TROUBLESHOOTING OF STRUCTURAL PROBLEMS

A structural failure problem was solved using an integrated and iterative program of testing and analysis. The steps taken in solving the problem were: analytical calculations; operational testing; qualifications of analytical results; problem identification; design of corrective action; and confirmatory testing.     

Vortex lattice transitions in YNi2B2C

We have performed extensive small-angle neutron scattering (SANS) diffraction studies of the vortex lattice in single crystal YNi₂B₂C for B‖c. High-resolution SANS, combined with a field-oscillation vortex lattice preparation technique, allows us to separate Bragg scattered intensities from two orthogonal domains and accurately determine the unit cell angle, β. The data suggest that upon increasing field there is a finite transition width where both low- and high-field distorted hexagonal vortex lattice phases, mutually rotated by 45°, coexist. The smooth variation of diffracted intensity from each phase through the transition corresponds to a redistribution of populations between the two types of domains.     

Flow phenomena in floppy tubes

Collapsible tubes, which occur all over the body, have unique properties from the point of view of both physics and physiology. A brief review is attempted of first the basic observable properties, followed by simple theory to explain the steady-flow aspects and an overview of the somewhat more complex theories for unsteady flow, in particular the flow-induced oscillations. The experimental evidence from laboratory studies is reviewed with particular emphasis on the dynamical system aspects. A final section looks at the current position and prospects.     

Magnetism and superconductivity in ErNi2B2C

We have performed a series of neutron diffraction experiments from the magnetic order and the vortex lattice in single crystal ErNi₂B₂C. The incommensurate magnetic structure develops additional even harmonics below the ‘ferromagnetic’ ordering temperature, T _F of 2.3 K. This feature and the existence of rods of diffuse scattering suggest the development of ferromagnetic microdomain walls. The magnetic structure is very sensitive to the application of a magnetic field with changes in modulation vector and harmonic content. Studies of the vortex lattice show the presence of a 45° reorientation transition and a distorted hexagonal to square transition as a function of applied field. Further distortions of the vortex lattice occur at T _N, but no changes are seen at T _F.     

Electrochemical behavior of LiCoO2 as aqueous lithium-ion battery electrodes

Despite the large number of studies on the behavior of LiCoO₂ in organic electrolytes and its recent application as a positive electrode in rechargeable water battery prototypes, a little information is available about the lithium intercalation reaction in this layered compound in aqueous electrolytes. This work shows that LiCoO₂ electrodes can be reversibly cycled in LiNO₃ aqueous electrolytes for tens of cycles at remarkably high rates with impressive values specific capacity higher than 100 mAh/g, and with a coulomb efficiency greater than 99.7%. Stable and reproducible cycling measurements have been made using a simple cell design that can be easily applied to the study of other intercalation materials, assuming that they are stable in water and that their intercalation potential range matches the electrochemical stability window of the aqueous electrolyte. The experimental arrangement uses a three-electrode flooded cell in which another insertion compound acts as a reversible source and sink of lithium ions, i.e., as the counter electrode. A commercial reference electrode is also present. Both the working and the counter electrodes have been prepared as thin layers on a metallic substrate using the procedures typical for the study of electrodes for lithium-ion batteries in organic solvent electrolytes.