Determination of butyltins in environmental samples using sodium tetraethylborate derivatisation: characterisation and minimisation of interferences

Interferences affecting the determination of butyltin species by sodium tetraethylborate (STEB) derivatisation followed by purge-trap preconcentration were systematically studied using synthetic solutions, natural water samples and sediment extracts. Substances that did not cause interferences included most common cations (apart from those metal ions listed below), anions, metalloids and polar organic compounds. Natural organic matter (NOM) specifically interfered with tributyltin (TBT) due to a mechanism involving partitioning of the butyltin to the hydrophobic portions of the NOM. The metal ions Ag(I) (≥2 μM), Cd(II) (≥2 μM), Cu(II) (≥0.5 μM) interfered predominantly with the determination of monobutyltin (MBT) due to catalytic degradation of the STEB reagent. Pb(II) (≥14 μM) interfered with butyltin determination by an unknown mechanism. Other interferences to the purge-trap method were shown to occur in the presence of chelating agents (e.g. EDTA) or hydrophobic liquids such as diesel fuel. A mixture comprising methanol (MeOH), EDTA and Mn(II) was used to partially mask the effect of interfering NOM and metals. Spike recoveries (mean±S.D. of n=7 different samples) of MBT, dibutyltin (DBT) and TBT in contaminated natural water samples were improved from 70±36,90±11 and 91±24 to 102±10,98±3 and 98±4%, respectively. Spike recoveries (mean±S.D. of n=5 different samples) of MBT, DBT and TBT in aliquots of sediment extracts were improved from 86±17,79±18 and 59±32 to 97±6.2,103±3.6 and 103±5.0%, respectively. The ability to analyse larger aliquots of sediment extracts in the presence of the masking mixture improved the detection limit four-fold if MBT and DBT determination was required and 10-fold if only TBT determination was required.     

Air Oxidation of N-Cyclopropylanilines

Air oxidation of N-cyclopropylanilines was shown to occur under either ambient conditions or accelerated conditions (warming or shining light) in an open container. A subsequent fragmentation resulted in formation of the corresponding acetamide. While potential mechanisms have been previously proposed, simple aerobic oxidation to β-hydroxy-propionamides in the absence of a radical promoter has not been previously reported.     

Enhanced ethanol sensing properties of WO3 modified TiO2 nanorods

Pristine and WO₃ decorated TiO₂ nanorods (NRs) were synthesised to investigate n-n-type heterojunction gas sensing properties. TiO₂ NRs were fabricated via hydrothermal method on fluorine-doped tin oxide coated glass (FTO) substrates. Then, tungsten was sputtered on the TiO₂ NRs and thermally oxidised to obtain WO₃ nanoparticles. The heterostructure was characterised by X-ray diffraction (XRD), scanning electron microscopy (SEM), and energy-dispersive X-ray (EDX) spectroscopy. Fabricated sensor devices were exposed to VOCs such as toluene, xylene, acetone and ethanol, and humidity at different operation temperatures. Experimental results demonstrated that the heterostructure has better sensor response toward ethanol at 200 °C. Enhanced sensing properties are attributed to the heterojunction formation by decorating TiO₂ NRs with WO₃.     

Moiré interferometry for thermal expansion of composites

Techniques were developed for high-sensitivity moiré interferometry by reflection, using a real reference grating of 1200 lines/mm (30,000 /in.). Coefficients of thermal expansion of selected graphite-epoxy laminates were determined in the temperature range of 297 K (75°F) to 422 K (300°F). Very good precision was achieved for a wide range of thermal-expansion coefficients, from approximately zero to 27 /K.D.E. Bowles was a Graduate Student at Virginia Polytechnic Institute and State University when this research was conducted; is currently Materials Engineer at NASA-Langley Research Center, Hampton, VA 23665Paper was presented at 1981 SESA Spring Meeting held in Dearborn, MI on May 31–June 4.