Electrospray ionization quadrupole time-of-flight tandem mass spectrometric analysis of hexamethylenediamine-modified maltodextrin and dextran

A combined methodology for obtaining at the preparative scale and characterization by nanoelectrospray ionization (nanoESI) quadrupole time-of-flight (QTOF) mass spectrometry (MS) and tandem MS (MS/MS) of linear polysaccharides modified at the reducing end is presented. Two polydisperse maltodextrins (1000 and 3000 Da) and a high molecular weight polydisperse dextran (6000 Da) were coupled with hexamethylenediamine (HMD). The coupling products were analyzed by nanoESI-QTOF-MS in the positive ion mode and MS/MS using collision-induced dissociation (CID) at low energies. In the HMD-M1000 mixture, the polysaccharide chains containing from 2 to 8 Glc residues were detected, while in HMD-M3000 we identified a complete series of chains containing from 8 to 21 Glc moieties. The employed ESI conditions enhanced the detection of chains with up to 46 Glc residues in the HMD-D6000 sample. By optimized MS/MS, HMD-modified polysaccharides of 3, 4, 5, 12 and 46 degrees of polymerization yielded product ion spectra exhibiting the whole set of Y- and B-fragment ions. The MS structural data were obtained within a few minutes of signal acquisition, with a sample consumption situating the analysis sensitivity in the picomolar range.     

BSA adsorption on bimodal PEO brushes

BSA adsorption onto bimodal PEO brushes at a solid surface was measured using optical reflectometry. Bimodal brushes consist of long (N=770) and short (N=48) PEO chains and were prepared on PS surfaces, applying mixtures of PS(29)-PEO(48) and PS(37)-PEO(770) block copolymers and using the Langmuir-Blodgett technique. Pi-A isotherms of (mixtures of) the block copolymers were measured to establish the brush regime. The isotherms of PS(29)-PEO(48) show hysteresis between compression and expansion cycles, indicating aggregation of the PS(29)-PEO(48) upon compression. Mixtures of PS(29)-PEO(48) and PS(37)-PEO(770) demonstrate a similar hysteresis effect, which eventually vanishes when the ratio of PS(37)-PEO(770) to PS(29)-PEO(48) is increased. The adsorption of BSA was determined at brushes for which the grafting density of the long PEO chains was varied, while the total grafting density was kept constant. BSA adsorption onto monomodal PEO(48) and PEO(770) brushes was determined for comparison. The BSA adsorption behavior of the bimodal brushes is similar to the adsorption of BSA at PEO(770) monomodal brushes. The maximum of BSA adsorption at low grafting density of PEO(770) can be explained by ternary adsorption, implying an attraction between BSA and PEO. The contribution of primary adsorption to the total adsorbed amount is negligible.     

Polystyrene film-coated glassware: a new means of reducing metal losses in trace metal speciation

A recently developed process for coating a glass surface with polystyrene (PS) film, by use of a simple chemical process has been used to reduce trace metal adsorption by cell components. The glass coating is a two-step procedure consisting of covalent attachment of vinyl-terminated PS to Si atoms on the glass surface then adsorption of PS from solution to create a stable PS film. To assess the quality of the coating we used anodic stripping voltammetry to study the adsorption of lead and cadmium ions in coated and untreated glass cells. In both short and long-term (24 h) experiments we observed that the amount of metal adsorbed was considerably less for the PS film-coated glass cell than for the uncoated cell. Further experiments showed that metal desorption is faster and metal contamination after cleaning is significantly lower for the coated cells. The PS film was, moreover, stable over a period of 6 months within the pH range 3.5–9.     

教师教学水平的时齐马尔可夫链评估方法

采用时齐马尔可夫链方法给出了一种评估教师教学水平的方法,对文［１］所给方法做了适当的改进,拓宽了该方法的应用范围,在多民族院校,使用本法可以克服由于学生基础不同等多方面的原因造成难以比较教师教学水平的难题．