Metallic nanoparticles on plasma treated carbon nanotubes: Nanohybrids

Multi-wall carbon nanotubes (MWCNTs) were decorated with metal clusters by thermal evaporation. Transmission electron microscopy (TEM) shows that the nature and extent of metal coverage can be varied by plasma treating the MWCNT surface. The metal clusters on oxygen plasma treated arc-discharge MWCNTs have a more dense distribution than the clusters evaporated on as-synthesized arc-discharge MWCNTs. In contrast, the plasma treatment did not affect the cluster distribution on CVD MWCNTs. Analyses of the valence band and the core levels by X-ray photoelectron spectroscopy suggest poor charge transfer between gold clusters and MWCNTs; on the contrary suggest good charge transfer between Ni clusters and MWCNTs.     

Determination of copper in medicinal plants used as dietary supplements by atomic absorption spectrometry with direct flame solid analysis

An alternative device for the direct solid analysis (DSA) for copper determination by flame atomic absorption spectrometry (FAAS) is proposed. Copper was directly determined in commercial medicinal plants used as dietary supplements. The determination of copper in solid samples by DSA–FAAS was made by using a conventional air–acetylene flame. Between 0.05 and 1.5 mg of each test, sample was weighed directly into a small polyethylene vial connected to the device used for solid introduction into the flame. Test samples were introduced into the flame as a dry aerosol using a T-quartz cell set between the burner and the optical path. The T-quartz cell has a slit in the superior part by which the solid aerosol passes to the flame. A transient signal, evaluated as integrated absorbance, is produced and it is totally integrated in 2 s. Background signals always presented absorbance values less than 0.1. It was found a characteristic mass of 0.8 ng Cu and absolute limit of detection of 1.2 ng (3 s), or 1.2 μg g⁻¹ if a sample mass of 1 mg was used. Optimized conditions for air flow rate, flame stoichiometry, and so on were established as well. No excessive grinding of the samples was needed and samples with particle of size less than 80 μm were used throughout. No statistical difference between the results from the proposed system and those obtained by sample digestion and determination by conventional FAAS was observed. With the proposed procedure, more than 50 test samples can be analyzed in 1 h and it can be easily adapted to conventional spectrometers for FAAS.     

Characterization of natural cellulosic fibers from Yucca aloifolia L. leaf as potential reinforcement of polymer composites

Cellulose - In this work lignocellulosic fibers were obtained from Yucca aloifolia L. leaves and their chemical, morphological, thermal and mechanical properties were studied. The fibers were...     

Metallic Li in carbonaceous nanotubes grown by metalorganic chemical vapor deposition from a metalorganic precursor

Metallic Li in carbonaceous nanostructures was obtained in high concentration (as much as 33.4%) through metalorganic chemical vapor deposition involving certain lithium–aminoalkyl moieties, which are formed in situ , by decomposition of a precursor containing both cobalt and lithium. The bimetallic complex containing both lithium and cobalt was characterized by IR spectroscopy, mass spectroscopy, nuclear magnetic resonance spectroscopy, elemental analysis and thermogravimetric analysis. X‐ray photoelectron spectroscopy measurements performed on the as‐grown films demonstrate that lithium can be stable in metallic form in such a film. Results of X‐ray photoelectron spectroscopic analysis of the as‐grown films are presented as direct evidence of the formation and stabilization of metallic lithium in carbon nanotubes. Carbon nanotubes, encapsulating metallic lithium, can potentially act as a miniaturized nanobattery. Such a battery would be potentially useful in the next generation of communication and remote sensing devices, where a pulse of current is required for their operation. In addition, with metallic lithium, having an effective nuclear magnetic moment, such materials can be envisioned to show potential applications in devices based on nuclear magnetic resonances. Copyright © 2008 John Wiley & Sons, Ltd.     

Characterization of poly(vinyl acetate)/sugar cane bagasse lignin blends and their photochemical degradation

The acetone-soluble lignin fraction (ASLF) of sugar cane bagasse, from a sugar and alcohol factory residue, was obtained after extraction with formic acid and used to prepare blends with poly(vinyl acetate) (PVAc) by casting. PVAc and ASLF/PVAc blends were irradiated with ultraviolet light (Hg lamp). Blend formation and the irradiation effects were examined through thermal analysis (TG and DSC), scanning electron microscopy, and atomic force microscopy. The DSC results show PVAc glass transition temperature (T _g) shifts because of both, irradiation and ASLF incorporation. Non-irradiated pure PVAc presented a smooth surface, while after UV irradiation, light surface spots are observed. ASLF/PVAc 10/90 and 5/95 blends did not exhibit differences before and after UV irradiation, suggesting that lignin protects PVAc from photochemical degradation.     

Spectroscopy and Defect Identification for Fluorinated Carbon Nanotubes

Finely tuned: Carbon nanotubes are exposed to a CF₄ radio‐frequency plasma (see picture). High‐resolution photoelectron spectroscopy shows that the treatment effectively grafts fluorine atoms onto the MWCNTs, altering the valence electronic states. Fluorine surface concentration can be tuned by varying the exposure time.

     

Influence of anabolic steroid treatment associated to physical exercise in the ultrasonic vocalization of rats

Unlike humans, who communicate in frequency bands between 250 Hz and 6 kHz, rats can communicate in frequencies above 18 kHz. Their vocalization types depend on the context and are normally associated to subjective or emotional states. It was reported significant vocal changes due to administration of replacement testosterone in a trained tenor singer with hypogonadism. Speech-Language Pathology clinical practices are being sought by singers who sporadically use anabolic steroids associated with physical exercise. They report difficulties in reaching and keeping high notes, "breakage" in the passage of musical notes and post singing vocal fatigue. Those abnormalities could be raised by the association of anabolic steroids and physical exercise. Thus, in order to verify if this association could promote vocal changes, maximum, minimum and fundamental frequencies and call duration in rats treated with anabolic steroids and physically trained (10 weeks duration) were evaluated. The vocalizations were obtained by handling the animals. At the end of that period, rats treated and trained showed significant decrease in call duration, but not in other parameters. The decrease in call duration could be associated to functional alterations in the vocal folds of treated and trained animals due to a synergism between anabolic steroids and physical training.     

Magnetic fields and the Weyl tensor in the early universe

We have solved the Einstein–Maxwell equations for a class of metrics with constant spatial curvature by considering only a primordial magnetic field as source. We assume a slight modification of the Tolman averaging relations so that the energy–momentum tensor of this field possesses an anisotropic pressure component. This inhomogeneous magnetic universe is isotropic and its time evolution is guided by the usual Friedmann equations. In the case of a flat universe, the space-time metric is free of singularities (except the well-known initial singularity at \(\text {t} = 0\) ). It is shown that the anisotropic pressure of our model has a straightforward relation to the Weyl tensor. We then analyze the effect of this new ingredient on the motion of test particles and on the geodesic deviation of the cosmic fluid.     

Completely random nanoporous Cu4O3–CuO–C composite thin films for potential application as multiple channel photonic band gap based filter in the telecommunication wavelengths

In 2003, Babin et al. theoretically predicted (J. Appl. Phys. 94:4244, 2003) that fabrication of organic–inorganic hybrid materials would probably be required to implement structures with multiple photonic band gaps. In tune with their prediction, we report synthesis of such an inorganic–organic nanocomposite, comprising Cu₄O₃–CuO–C thin films that experimentally exhibit the highest (of any known material) number (as many as eleven) of photonic band gaps in the near infrared. On contrary to the report by Wang et al. (Appl. Phys. Lett. 84:1629, 2004) that photonic crystals with multiple stop gaps require highly correlated structural arrangement such as multilayers of variable thicknesses, we demonstrate experimental realization of multiple stop gaps in completely randomized structures comprising inorganic oxide nanocrystals (Cu₄O₃ and CuO) randomly embedded in a randomly porous carbonaceous matrix. We report one step synthesis of such nanostructured films through the metalorganic chemical vapor deposition technique using a single source metalorganic precursor, Cu₄(deaH)(dea)(oAc)₅???(CH₃)₂CO. The films displaying multiple (4/9/11) photonic band gaps with equal transmission losses in the infrared are promising materials to find applications as multiple channel photonic band gap based filter for WDM technology.     

Arched beams of Bresse type: observability and application in thermoelasticity

Nonlinear Dynamics - This is the first paper of a trilogy intended by the authors in what concerns a unified approach to the stability of thermoelastic arched beams of Bresse type under...