New Route of Microwave-Assisted Synthesis of Carbon-Supported Nickel Phosphide (C/Ni2P) Nanocomposite

Abstract

A novel, fast, and easy method for synthesizing a carbon-supported Ni₂P nanocomposite (C/Ni₂P) is described. The process involves a reaction between a nickel salt, phosphoric acid, and a carbon source by utilizing microwave irradiation. The carbon source for the nanocomposite is from renewable supplies, namely, tannin and lignin. The method has successfully synthesized Ni₂P nanoparticles dispersed in a carbon matrix with a particle size ranging from 20 to 50 nm in diameter. During the microwave process, tannin and lignin provided a reducing environment in the microwave irradiation process. The synthesized products are characterized by several characterization methods. The method showed that phosphoric acid, which is a nontoxic compound, could be used as an alternative P source for synthesizing Ni₂P. The method is fast, easy, and an economical process to synthesize the carbon-coated Ni₂P nanocomposite.     

Surface-enhanced vibrational investigation of adsorbed analgesics

Adsorption properties of acetylsalicylic acid (AA), ibuprofen and acetaminophen deposited from volatile solvents with varying protic/aprotic properties on vacuum-evaporated silver films were characterized using surface-enhanced infrared absorption (SEIRA) and surface-enhanced Raman spectroscopy (SERS). SERS preferentially enhances monolayer Raman shifts, while SEIRA can enhance the infrared absorbance of the monolayer and multilayers. To our best knowledge, this is the first reported study of these molecules using a combination of SERS/SEIRA. SERS revealed that AA and ibuprofen adsorbed ionically in monolayers, independent of the deposition solvents used in the process. SEIRA experiments showed that AA multilayers condensed molecularly using a deposition solvent with polar bonds. However, when an alkane deposition solvent with non-polar bonds such as n-heptane was used, AA adsorbed as acetylsalicylate ions in the first few multilayers, while ibuprofen always adsorbed as the free acid in the multilayer. These ionization trends depend upon the affinity of AA and ibuprofen for the underlying silver film. TPD experiments on silver powders further demonstrated that ibuprofen affinity for silver was less than AA. Furthermore, SEIRA indicated that acetaminophen adsorbed as multilayers of metastable polymorphs using protic or polar aprotic deposition solvents. Protic deposition solvents gave higher quality SERS spectra of an acetaminophen monolayer in comparison to polar aprotic deposition solvents. Such studies could find significant applications in biochemical and nanotechnology processes such as drug delivery, catalysis, and tissue engineering and will contribute to the understanding of the impact and fate of analgesics released into the environment.     

Excitation of linear and nonlinear cavity modes upon interaction of femtosecond pulses with arrays of metallic nanowires

We investigate linear and nonlinear effects induced by the scattering of femtosecond optical pulses by cavity-shaped two-dimensional distributions of metallic cylinders. In particular, by employing a numerical method based on the multiple scattering matrix algorithm, we demonstrate that, at both the fundamental frequency and the second harmonic, such arrays of metallic nanowires support localized (cavity) surface plasmon–polariton modes with characteristic lifetime ranging from a few tens of femtoseconds to more than a hundred of femtoseconds.     

Design and fabrication of teflon-coated tungsten nanorods for tunable hydrophobicity

The nature of water interaction with tungsten nanorods (WNRs) fabricated by the glancing-angle deposition technique (GLAD)-using RF magnetron sputtering under various Ar pressures and substrate tilting angles and then subsequent coating with Teflon-has been studied and reported. Such nanostructured surfaces have shown strong water repellency properties with apparent water contact angles (AWCA) of as high as 160°, which were found to depend strongly upon the fabrication conditions. Variations in Ar pressure and the substrate tilting angle resulted in the generation of WNRs with different surface roughness and porosity properties. A theoretical model has been proposed to predict the observed high AWCAs measured at the nanostructure interfaces. The unique pyramidal tip geometry of WNRs generated at low Ar pressure with a high oblique angle reduced the solid fraction at the water interface, explaining the high AWCA measured on such surfaces. It was also found that the top geometrical morphologies controlling the total solid fraction of the WNRs are dependent upon and controlled by both the Ar pressure and substrate tilting angle. The water repellency of the tungsten nanorods with contact angles as high as 160° suggests that these coatings have enormous potential for robust superhydrophobic and anti-icing applications in harsh environments.     

A novel tungsten trioxide (WO3)/ITO porous nanocomposite for enhanced photo-catalytic water splitting

Hybrid nanocomposite films of ITO-coated, self-assembled porous nanostructures of tungsten trioxide (WO(3)) were fabricated using electrochemical anodization and sputtering. The morphology and chemical nature of the porous nanostructures were studied by Scanning Electron Microscopy (SEM) and X-ray Photoelectron Spectroscopy (XPS), respectively. The photoelectrochemical (PEC) properties of WO(3) porous nanostructures were studied in various alkaline electrolytes and compared with those of titania nanotubes. A new type of alkaline electrolyte containing a mixture of NaOH and KOH was proposed for the first time to the best of our knowledge and shown to improve the photocurrent response of the photoanodes. Here, we show that both the WO(3) nanostructures and titania nanotubes (used for comparison) exhibit superior photocurrent response in the mixture of NaOH and KOH than in other alkaline electrolytes. The WO(3) porous nanostructures suffered from surface corrosion resulting in a huge reduction in the photocurrent density as a function of time in the alkaline electrolytes. However, with a protective coating of ITO (100 nm), the surface corrosion of WO(3) porous nanostructures reduced drastically. A tremendous increase in the photocurrent density of as much as 340% was observed after the ITO was applied to the WO(3) porous nanostructures. The results suggest that the hybrid ITO/WO(3) nanocomposites could be potentially coupled with titania nanotubes in a multi-junction PEC cell to expand the light absorption capability in the solar spectrum for water splitting to generate hydrogen.     

The impact of the natural sciences on archaeology

This article reviews some of the applications of physics to the solution of archaeological problems. The use of magnetic, resistivity and electromagnetic surveying techniques for the location of buried features is described. Various methods of age determination are outlined while the problems associated with radiocarbon dating of organic material and thermoluminescent dating of pottery are discussed in detail. The techniques, including petrological examination, chemical analysis and isotopic analysis, employed in the physical examination of archaeological artefacts are described. Examples of the application of these techniques in establishing the source of the raw materials used in pottery, metal and stone implements and in elucidating the techniques of manufacture of pottery and metal objects are also given.     

Comparative study on different carbon nanotube materials in terms of transparent conductive coatings

We compared conductive transparent carbon nanotube coatings on glass substrates made of differently produced single-wall (SWNT), double-wall, and multiwall carbon nanotubes. The airbrushing approach and the vacuum filtration method were utilized for the fabrication of carbon nanotube films. The optoelectronic performance of the carbon nanotube film was found to strongly depend on many effects including the ratio of metallic-to-semiconducting tubes, dispersion, length, diameter, chirality, wall number, structural defects, and the properties of substrates. The electronic transportability and optical properties of the SWNT network can be significantly altered by chemical doping with thionyl chloride. Hall effect measurements revealed that all of these thin carbon nanotube films are of p-type probably due to the acid reflux-based purification and atmospheric impurities. The competition between variable-range hoping and fluctuation-assisted tunneling in the functionized carbon nanotube system could lead to a crossover behavior in the temperature dependence of the network resistance.     

Phenolic compounds,essential oil composition,and antioxidant activity of Angelica purpurascens (Avé-Lall.) Gill

In this study, methanol extracts (MEs) and essential oil (EO) of Angelica purpurascens (Avé-Lall.) Gill obtained from different parts (root, stem, leaf, and seed) were evaluated in terms of antioxidant activity, total phenolics, compositions of phenolic compound, and essential oil with the methods of 2,2-azino-bis(3ethylbenzo-thiazoline-6-sulfonic acid (ABTS•⁺), 2,2-diphenyl-1-picrylhydrazil (DPPH•) radical scavenging activities, and ferric reducing/antioxidant power (FRAP), the Folin–Ciocalteu, liquid chromatography−tandem mass spectrometry (LC−MS/MS), and gas chromatography-mass spectrometry (GC−MS), respectively. The root extract of A. purpurascens exhibited the highest ABTS•⁺, DPPH•, and FRAP activities (IC₅₀: 0.05 ± 0.0001 mg/mL, IC₅₀: 0.06 ± 0.002 mg/mL, 821.04 ± 15.96 µM TEAC (Trolox equivalent antioxidant capacity), respectively). Moreover, EO of A. purpurascens root displayed DPPH• scavenging activity (IC₅₀: 2.95 ± 0.084 mg/mL). The root extract had the highest total phenolic content (438.75 ± 16.39 GAE (gallic acid equivalent), µg/mL)). Twenty compounds were identified by LC−MS/MS. The most abundant phenolics were ferulic acid (244.39 ± 15.64 μg/g extract), benzoic acid (138.18 ± 8.84 μg/g extract), oleuropein (78.04 ± 4.99 μg/g extract), and rutin (31.21 ± 2.00 μg/g extract) in seed, stem, root, and leaf extracts, respectively. According to the GC−MS analysis, the major components were determined as α-bisabolol (22.93%), cubebol (14.39%), α-pinene (11.63%), and α-limonene (9.41%) among 29 compounds. Consequently, the MEs and EO of A. purpurascens can be used as a natural antioxidant source.     

Transition Metal Ion-binding Properties of a 14-Membered N2O2S2- Macrobicyclic Ligand

The selective liquid–liquid extraction of various transition metal cations from the aqueous phase to the organic phase was carried out using a 14-membered N₂O₂S₂-macrobicycle. Metal picrates such as Pb²⁺, Co²⁺, Zn²⁺, Ni²⁺,Cu²⁺ and Cd²⁺ were used in this extraction studies. It was found that the ligand showed moderate selectivity towards Pb²⁺ only among the other metals. The extraction constant (log K _ex) was determined to be 13.8 for Pb²⁺ complex.