Ionic liquid-mediated sol–gel coatings for capillary microextraction

Ionic liquid (IL)-mediated sol–gel hybrid organic–inorganic materials present enormous potential for effective use in analytical microextraction. This opportunity, however, has not yet been explored. One obstacle to materializing this prospect arises from high viscosity of ILs significantly slowing down sol–gel reactions. In this work, we developed a method that overcomes this hurdle and provides IL-mediated advanced sol–gel materials for capillary microextraction (CME). We examined two different ILs: (a) a phosphonium-based IL, trihexyltetradecylphosphonium tetrafluoroborate, and (b) a pyridinium-based ionic liquid, N-butyl-4-methylpyridinium tetrafluoroborate. These ILs were evaluated in conjunction with two types of hydroxy-terminated polymers: (a) two Si–OH terminated polymers (PDMS and BMPO), and (b) two C–OH terminated polymers (PEG and polyTHF) that differ in their sol–gel reactivity. Scanning electron microscopy results demonstrate that ILs can serve as porogenic agents in sol–gel reactions. The IL-mediated sol–gel coatings prepared with silanol-terminated polymers provided up to 28 times higher extractions in off-line CME-GC compared to analogous sol–gel coatings prepared without any IL in the sol solution. Contrary to this, the IL-mediated sol–gel coatings prepared with C–OH terminated polymers provided lower extraction efficiencies compared to their IL-free counterparts. These observations were explained by (a) lower sol–gel reactivity of C–OH groups in PEG and polyTHF compared to Si–OH groups in PDMS and in hydrolyzed alkoxysilane precursors and (b) extremely high viscosity of ionic liquids. This study shows that IL-generated porous morphology alone is not enough to provide effective extraction media: careful choice of the organic polymer and the precursor with close sol–gel reactivity must be made to ensure effective chemical bonding of the organic polymer to the created sol–gel material to be able to provide the desired sorbent characteristics. Additionally, IL-mediated sol–gel PDMS coatings provided run-to-run RSD values of 4.2–5.0% and detection limits ranging from 3.2 ng/L to 17.4 ng/L. PDMS sol–gels prepared without ILs provided RSD values of 2.8–14.1%, and detection limits ranging from 4.9 ng/L to 487.0 ng/L.     

Recent advances in ZnO nanostructures and thin films for biosensor applications: Review

Biosensors have shown great potential for health care and environmental monitoring. The performance of biosensors depends on their components, among which the matrix material, i.e., the layer between the recognition layer of biomolecule and transducer, plays a crucial role in defining the stability, sensitivity and shelf-life of a biosensor. Recently, zinc oxide (ZnO) nanostructures and thin films have attracted much interest as materials for biosensors due to their biocompatibility, chemical stability, high isoelectric point, electrochemical activity, high electron mobility, ease of synthesis by diverse methods and high surface-to-volume ratio. ZnO nanostructures have shown the binding of biomolecules in desired orientations with improved conformation and high biological activity, resulting in enhanced sensing characteristics. Furthermore, compatibility with complementary metal oxide semiconductor technology for constructing integrated circuits makes ZnO nanostructures suitable candidate for future small integrated biosensor devices. This review highlights recent advances in various approaches towards synthesis of ZnO nanostructures and thin films and their applications in biosensor technology.     

The stability of L3 sponge phase in acidic solutions

In the synthesis of the disordered lyotropic liquid crystalline L3 sponge phase prepared with the cosurfactants cetylpyridinium chloride and hexanol, aqueous NaCl solution is used as the solvent. When this sponge phase is used as the template for L3 silica-phase processing, we replace NaCl with HCl to facilitate the acid catalysis of tetramethoxysilane in forming a templated silica gel, assuming that changing the solvent from NaCl(aq) to HCl(aq) of equivalent ionic strength does not affect the stability range of the L3 phase. In this work, we confirm that changing the pH of the solvent from neutral to acidic (with HCl) has negligible effect on the L3 phase region. Equivalent ionic strength is provided by either NaCl(aq) or HCl(aq) solvent; therefore, a similar phase behavior is observed regardless of which aqueous solvent is used.     

Ionic liquid-mediated bis[(3-methyldimethoxysilyl)propyl] polypropylene oxide-based polar sol–gel coatings for capillary microextraction

Two ionic liquids (IL), namely, 1-methyl-3-octylimidazolium chloride (MOIC) and trihexyltetradecylphosphonium tetrafluoroborate (TTPT) were used to prepare polar and nonpolar sol–gel coatings for capillary microextraction (CME). Bis[(3-methyldimethoxysilyl)propyl] polypropylene oxide (BMPO), containing sol–gel active terminal methoxysilyl groups and polar propylene oxide repeating units, was used to prepare polar sol–gel hybrid organic–inorganic coatings. Hydroxy-terminated poly(dimethyl-co-diphenylsiloxane) was used as the sol–gel active organic component for nonpolar sol–gel hybrid coatings. Compared to a sol–gel BMPO coating prepared without IL, the sol–gel BMPO coatings prepared with the use of both of these ILs provided more efficient extraction as is evidenced by more pronounced GC peak areas. The MOIC-mediated sol–gel BMPO coating provided larger GC peak areas compared to the TTPT-mediated sol–gel BMPO coating. Scanning electron microscopy results suggested that MOIC provided a more porous morphology of the sol–gel BMPO extraction media compared to that prepared with TTPT. Thus, individual ILs can affect the porosity of sol–gel materials to different degrees. Overall, the sol–gel BMPO coating prepared with the ILs could extract nonpolar to polar analytes directly from aqueous samples. Detection limits were on the order of nanograms per liter (1.9–330.5 ng/L) depending on the analyte class. Furthermore, the MOIC-mediated sol–gel BMPO coating demonstrated high thermal stability (330 °C), solvent resistance, and fast extraction equilibrium (10–15 min) for polar and moderately polar analytes.     

Porous silicon templates for electrodeposition of nanostructures

We report the fabrication and characterization of porous silicon templates for electrodeposition of high aspect ratio one-dimensional metallic nanostructures (nanowires/nanoparticles) in them. Even though nanostructures/nanowires in the past have been fabricated in alumina, polymer or silica templates, the advantages of this approach are the possibility for seamless integration of nanostructures with other silicon components, and silicon based sensors because of better physical and electrical interconnection between the nanostructure and the silicon substrate. In this work, fabrication and characterization of nanowires/nanostructures such as single-segment Ni–Fe and Au and two-segment Ni–Fe/Au electrodeposited in the porous silicon template are presented. The templates with ordered and controlled nanometer-sized pores, 40 nm and 290 nm in diameter, were created through porous Si etching. The morphology, composition and structural characteristics of the template and of the single-segment Ni–Fe and Au and two-segment Ni–Fe/Au nanostructures of diameter 275±25 nm, length up to 100 μm and pitch of 1 μm were analyzed using scanning electron microscopy and X-ray diffraction techniques. The micrographs confirm that the plating parameters have a strong influence on morphology and composition of the structures. Further, the Ni–Fe images show the formation of both vertical and branched nanowires along with nanoparticles, from breakage/discontinuous growth of nanowires. Ni–Fe nanostructures were further analyzed for temperature-dependent magnetization and magnetization vs. magnetic field measurements using a commercial physical property measurement system. They reveal no magnetic anisotropy of the nanostructures probably due to a balance between ‘reduced’ shape anisotropy from branched and rough pore surfaces and magnetocrystalline anisotropy. PACS 61.46.+w; 75.75.+a; 81.07.-b; 81.16.Be     

Silica nanowires: Growth,integration, and sensing applications

This review (with 129 refs.) gives an overview on how the integration of silica nanowires (NWs) into micro-scale devices has resulted, in recent years, in simple yet robust nano-instrumentation with improved performance in targeted application areas such as sensing. This has been achieved by the use of appropriate techniques such as di-electrophoresis and direct vapor-liquid-growth phenomena, to restrict the growth of NWs to site-specific locations. This also has eliminated the need for post-growth processing and enables nanostructures to be placed on pre-patterned substrates. Various kinds of NWs have been investigated to determine how their physical and chemical properties can be tuned for integration into sensing structures. NWs integrated onto interdigitated micro-electrodes have been applied to the determination of gases and biomarkers. The technique of directly growing NWs eliminates the need for their physical transfer and thus preserves their structure and performance, and further reduces the costs of fabrication. The biocompatibility of NWs also has been studied with respect to possible biological applications. This review addresses the challenges in growth and integration of NWs to understand related mechanism on biological contact or gas exposure and sensing performance for personalized health and environmental monitoring.

Silica nanowires decorated micro-electrodes for sensing application

     

Iron(III)–salen complex on a polymer scaffold as heterogeneous catalyst for synthesis of benzimidazoles

Research on Chemical Intermediates - Benzimidazoles are important bioactive compounds with diverse applications in the medicinal, industrial, as well as agrochemical fields. In this study, an...     

Enhanced resonator sensitivity with nanostructured porous silica coatings

We present a strategy to increase the sensitivity of resonators to the presence of specific molecules in the gas phase, measured by the change in resonant frequency as the partial pressure of the molecule changes. We used quartz crystals as the resonators and coated them with three different thin films (<1 microm thick) of porous silica: silica xerogel, silica templated by an ordered hexagonal phase of surfactant micelles, and silica templated by an isotropic L3 phase surfactant micellar system. We compared the sensitivity of coated resonators to the presence of water vapor. The crystals coated with hexagonal phase-templated silica displayed a sensitivity enhancement up to 100-fold compared to an uncoated quartz crystal in the low-pressure regime where adsorption played a dominant role. L3 phase-templated silica displayed the highest sensitivity (up to a 4000-fold increase) in the high partial pressure regimes where capillary condensation was the main accumulation mechanism. Three parameters differentiate the contributions of these coatings to the sensitivity of the underlying resonator: (i) specific surface area per unit mass of the coating, (ii) accessibility of the surfaces to a target molecule, and (iii) distribution in the characteristic radii of curvature of internal surfaces, as measured by capillary condensation.